Search results

Results 1 to 6 of 6
  1. W

    CX2510 HST Cab Stalling in High Gear Going up Grade

    I have a winding paved driveway, about 7 deg grade. On my last tractor, a BX2200, I use to fly up the driveway in high gear but my Kioti CX2510 HST Cab quickly loses power and wants to stall. I have tried to increase speed slowly but it can never even get to the slow speed that I get in low...
  2. W

    CX2510 HST Overly Sensitive Joystick Valve

    Most noticeable when using pallet forks, even at idle rpm, the joystick valve control is overly sensitive. Difficult to control fine movements. Never had that problem with Kubota. Is there any way of selectively slowing it down when needed?
  3. W

    CX2510 HST Quick-Hitch Stuck Against Rear Lift Control Lever

    I had a few Kubota's BX models over the past 20yrs without me doing anything stupid. I added a Landpride QH10 quick-hitch and 3pt hitch ballast box for some loading work. I though I had the hitch speed control knob under the seat in the locked position but I somehow hit the 3pt control lever...
  4. W

    CX2510 Cab R14 Goodyear - What tire pressures?

    New CX2510HST Cab has about 10 hours. I bought it with R14T 6 ply tires (Goodyear) and the service manual says to fill rear tires to 40 PSI but checking today the rear only have about 19 PSI ! (Yes I checked with another pressure gauge as well). The rear tires are labeled for 40PSI and the...
  5. W

    CX2510 Cab - Can You Identify These Electrical Plugs?

    I need to bring out a 12vdc line to the rear of my tractor for a tow behind sprayer whose motor is rated at 8amps. Wire size of 18 or 20 AWG should be enough and I found two unused, capped electrical harnesses in the rear of the tractor. The first picture shows one at the top of the cab and...
  6. W

    Tires  CX2510 Cab - OK to Add 2" or 3" Wheel Spacers?

    New CX2510 Cab owner. I used to have a Kubota BX2200 which had 2" wheel spacers front and rear and it handled well on my mildly hilly, slopping property. The CX2510 Cab feels much more tippy and would like opinions about adding spacers to the CX2510. Are there any warranty concerns by adding...
Top