Search results

I have a Kubota B7500 CUT with just over 250 hrs. We recently moved to a new house that is much hillier than our previous property. So I'm looking to trade for a SCUT (Lower center of gravity), I would like a comparable Deere or Kubota 22-26hp with a belly mower and FEL. The B7500 comes with 54...

Here are a few pics of my bucket hook solution, I mounted 4 pieces of 2.5" square tubing to the top edge of my bucket. I then got a thick wall length of 2" tubing the width of the bucket, I then made a couple of hook adapters. I used weld on 5/16 chain hooks, D-Rings and large tow hooks from the...

I know there have been tons of posts on adding remotes but I would like someone to look over what I have planned for my B7500 and tell me if it's the best way to accomplish adding an auxiliary remote valve to control a hydraulic top link and also have a set of hydraulic ports available to power...

I recently purchased a used FEL mounted Curtis snowplow for my Kubota B7500. I have it all hooked up and did a little testing, granted it was on my dry asphalt driveway, but I am a little concerned. When I was pushing along I got a lot of chatter from the blade, made the whole tractor shake. Not...

I am going to be installing a Curtis FEL mounted snow plow on my Kubota B7500. In the below picture item #18 is called a by-pass releif valve, one of the "T" connectors is damaged. My question, is the releif valve actually needed in my application, and if so what exactly does it do. To control...

About 10 yrs ago I built a class III receiver carrier for my pickup , I used the frame from an old mainframe computer that I cut down to size, the problem was it was way to heavy, close to 200lbs empty. Well I welded some angle iron to the bottom and a mast and now it's my 3pt carryall. with its...

Placed the order on Friday, should be about 2wk ship time. Here's my set up, I acquired a Fasse diverter valve with another implement that was originally hooked to a JD. I used the bracket it came with and welded it to my loader arm, I did it this way so I would still only have 4 QCs when ever I...