Search results

http://www.wbdg.org/ccb/NAVFAC/PPUBB/p433.pdf I was looking for some welding info and came across this :thumbsup:

I have a 25-30 year old wood splitter works good for me except, the return detent does not hold any more. It's a cross valve, and I can't seem to find an exploded parts picture to be able to take it apart. If it's repairable, some adjustment or get a new one?

Does anyone have an online source for scrap iron/steel prices. Have been looking around with not much luck. I do call scrap yards but it gets old, I call then they have to get back to me. Just looking for a monthly average to see where prices are at. Thanks

The loader on my tractor will drop going from center to lift, or if I hold the lever just right, I can get the loader to come down while pulling the lever back. It will drift down quit quick when sitting, running or off. I put the bucket up and disconected the hoses and in 3 days the loader...

It went on the the trailer just fine, yes the frame looked bad but the truck looked, sat normal. Stopped to unload it and popped the rear strap and it collapsed :eek:. So anybody looking for a fixer upper, Runs great :D

Is there a way to id a cylinder with out knowing what you have? I have two used cylinders to use on my dump trailer, seemed in good shape. But the packing is bad on one of the cylinders. Can you get a generic packing kit, if you know the dimensions? Thanks

I was wondering if anybody had away to id a TD 6. The tag by the foot brake pedal is gone. Thanks

Gooseneck on bumper? Just wondering if I can pull a gooseneck with the ball on my pintle hitch. I found a good deal on a trailer but I haven't got the hitch set upon the truck. Empty trailer, just to get it home.

I got a chance to use my alamo SH88 on some brush. It worked good, just too many trees :D

It's not a grapple yet, I hope to put one on some day, but for now, it works good for what I need :D

I was having some issues with my loader mounts getting sloppy,and not setting down level, the left side would hit first. When I was looking it over I saw 2 bolts on each side of the front mounting bracket had shifted.The first 2 pics before, second 2 after. I have the book for the loader and it...

My first trailer, first time with hydraulics. I had everything but the but the hoses. It actually works :D

I had the seal go out on the rt. front hub. I have the manual and thought, I can do this my self. Everything went well, the seal was 25.00 and some oil. To press it apart I used a gear puller. To put it back together just some heat to slide everything back together.

I was cleaning up and moving some pictures around on the computer, and found these.

I haven't seen this mod and if I missed it, sorry. After hitting the tail lights a few times on trees, I moved the lights to the inside of the rops. Haven't had a problem since :D

I was pushing snow with the bb and lost the the pin that connects the lower arm to the lift arm. It's a 5/8''x 2'' pin, can it be replaced with a bolt? Or just make a pin out of a bolt? And if I can, is a grade 8 the bolt to use? JD wants 14.00 for the pin, I have the bolt to make the pin. thanks

About a year ago I put some hardfacing on my bucket. I was surprised at what I found. I felt I had a good approach to the problem http://www.tractorbynet.com/forums/parts-repairs/112488-hard-facing-bucket.html?highlight=hardfacing Not enough HF, applied wrong? granite drive to much?

I put the electric diverter valve kit on my 4310, install went great. At the same time I put in a bucket curl seal kit. All at about 480 hrs, the plan was to run the tractor for about 20 hrs and do the 500 hr service. The problem I noticed was a pronounced cavitation on the loader lift cilnders...

Is there any way to tell if I have a two speed pump on my log splitter. No name on the pump, it's about 30 yrs old, newer 9 hp motor, not home made. I am using it more and it is under powered and a slow cycle time. So I am wondering if a new pump would help? Thanks

I have a alamo hd 88, it has the light blades on it. Alot are missing so I am looking to replace with what I have, or go to heavier blades if it would make a differance. I have a JD 4310 and it handles it just fine, it would be mostly used for brush up to 1.5'', fire lanes, and ditch banks. The...

This weekends project was a welding table 3'x5'x1/2'' The first problem I see is I had 4 swivel wheels without locks, might have to change them.

I took everyones advice about adding weight to box blade and it works great for what I need. So then how about adding weight to a rear blade, I did and it is much better, and added a stand. I don't have pictures of the box blade yet.

I just got a new used Alamo SH 88 flail mower, it looks rough shape but in good working condition. I found all the obvious grease fittings, and the gear box is straight forward. I replaced 2 fittings that were missing. The question I have is, the hole in the one picture that looks like a grease...

The Little woman went to the recycling center tonight, I had to work late. She got to the metal dumpster looked inside to put some stuff in it and saw what she thought was a stihl chain saw, and it was. So she grabbed it, Thinking we could use it for parts. We started looking it over and and...

Has anyone put on a European front mount three point set up on a 4310 or similar tractor? Can you put one on a US model? If so can it be used with a loader attached? I found the kits on JD parts, part # LVB25300

I have a 6' king kutter BB on the back of a JD 4310 and was wondering how much weight to add to it. Or what others have added to there BB. Thanks for any info.

I am looking a getting a tiller, a used one, any make about 5'. And I want to get a flail mower. So my thought is, can I, or has anybody re-geared a tiller to speed it up to be used as a flail mower? And replacing the tiller tines with flail blades.

I started to make a 3pt sprayer this weekend. I guess I was looking for some input or suggestions. First use will be weed and brush control, second would be fertilizer. Thanks :)

This was the second project I worked on. They have come in handy more than I thought. I still catch myself carrying and dragging things and asking myself didn't I buy a tractor for this and made the forks. :D I am learning

I was wondering if anybody knows if I can weld this?? or to it. I have an idea of what I want to do, but if I can't weld on it, it changes everything. Thanks

I didn't have much luck last night posting, so I thought I would try again. I bought a full set of R-1 tires and wheels for my 4310. Front tires are 7-16 the rear tires are 12.4-24 and are loaded with CaCl. The tires have about 80-100 hrs on them and are about 6 years old. My intension is to...

I found what I think was a good deal on some R-1 tires. They have about 80-100 hours on them mounted on JD rims and filled with CaCl, just the rear tires. Before After The problem I found the problem after it happened.

I was off one night for the lunar eclipse. Tuesday night wednesday morning about 1:30 am got up to go to the bathroom and could not believe how bright it was outside. I thought these were some of the best out of about 30 pictures. Just a full moon and some camera adjustments.

I was wondering if anybody had some ideas on moving a tractor in the snow slush and salt. I have a 14' skidloader trailer. I thought about putting a tarp over the tractor, but the trailer has a wood deck with about 2'' gaps between the boards. And I would think even if I cover the top, I would...

I got a new camera and need some practice loading pictures. This is also my first shot at logging. It's about 3 acres of 30 year old red pine That need to be thinned out. I used a stihl 260 to cut them down and a 410 L/BH to help push them in the right direction, and the 4310 to move them. First...

I found this on another site, and I thought maybe someone would find it useful. I thought it was a cool idea. Machine Builders Network

These are some pictures of the first project for my tractor, adding some counter weight to my 4310. One scrap bridge bearing pad 2.25" by 24" by 41" = about 625#. Some scrap angle, rod, and 2x4's. Cost about 10.00 for primer and paint.

Hi, new to TBN have been reading for awhile, learned a lot ! I have a JD 4310 with a 410 loader I bought it used with about 400 hrs, very happy with it. I do have a driveway about 500 ft long and all gravel. The guy I bought the tractor from had a gravel driveway about 800 ft long. The bucket is...

Hi, New to TBN I cant seem to view pictures when I click on the photos section, I cleared all cookies and nothing, all I get is a black dot where the picture is. Is there something I am missing?