Search results

Does a king kutter fit or linebach 7300??i know there are fit problems with phd's??what about extensions???

i have a question?is it possible to convert a 2001 dodge ram 2500 qaud cab 4x4 diesel into a dually???what would it cost??has anyone done this before???we just need more load capacity??we love are truck it has 57k and has been perfect but we now need a dually for what we are doing??bws

do i need a special gauge??i have the stem to the top but when i try to bleed,all i get is calcium??what psi should i run in the front and rears on a l3830 kubota?book says 20 all the way around but this seems real light in the front??

i picked up 15 gallons of utf at costco.my question is it says that its for kubota is this the right stuff??is it the same as kubota udt??should it go in the front diferental too or should i use 80-90 gear oil??how warm should the trany be??if its too hot it could burn me right??

how do i get the service reminder and the "wrench" light off???

we bought a new garden tractor a week ago and my wife keeps getting it stuck[ruts,holes,ect] I notice only one tire spins.the hydro trans is a 310-3000 hydro gear.who or how can one get a posi in a 2500.00 -3000.00 garden mower???

i have a band saw but that would add shavings.what do the pro's do??

anybody price these??

its a 3pt mount and i,m trying to find some info on it??

i was thinking that my kubota l3830 has a heavy duty [723] loader and heavy duty 72" bucket so i was thinking i could make a 16" backhoe bucket fit on it[the loader] someway with some heavy duty brackets??anyone done this???

i bought a l3830 back in january and think i have a shorter warranty.i think they extended it in march??? anybody know?? there warranty info at there website wont come up??

who builds the best or the most bang for the buck???we need a 400-700lb upright gun safe with maybe a 1 hour fire protection??liberty,fort knox???seems to be a lot of them and the features are confusing???

we are in the process of getting a well drilled and will be doing the plumbing ourselves.what size is the ultimate holding tank[presurized]?? should we get one that can be barried??i see the amtrol tanks.the well x??models look to small i think anybody know what i should pay??thanks bws

any info on this??do we need a holding tank??what about pumps i know 240volt is the way to go but what brand?

we have a 100' section of a ditch across the back of our property that we want to fill in.the grass in this area is pretty wet in the winter/dry in summer.we are thinking of putting n-12 perf plastic pipe in and dont know about the gravel/rock needed or the fabric we need to do this project.can...

how come after 4 months of using my king kutter 5' hog the brackets c/t the side pins are bent real bad.both the side pins angle back now and i can barley get the hitch on.also the entire deck is twisted???i have used this very little but left it on the tractor in the raised position.should i...

i see many post's on 3130/3430/3830 tractors and other brands and would urge someone who was buying a new tractor to think about the total whieght of the thing with attachments/calcium/tires/loader/fluids.i purchased a 3830 and bent a 7000lb trailer in half.if i would have bought a slightly...

have an old 1920\'s fordson cleatrac need info we pulled this out of the stickerbushes on our farm,can these be restored??are parts available??whats it worth in rusty condition?

need to do some painting on an old implement i picked up and am in need for the highest quality a/c i can get my hands on.need it110v portable 18-25 gallons ? puma or quincy or ingresol rand maybee??

i picked a kubota l3830hst/filled r/4s. after asking and reading many posts but i have too say after buying it i now wished i would have gotten a smaller one here's why.[1]i bent the flatbed when i brought it home[2]the tractor is mass heavy and wont mow well due too the wieght[crushes the...

just purchased a 5' kk rotary mower.i,ve done a search and seen some posts on chain gaurds but since i weld i was thinking of just bolting on a flat plate[1/4"] and welding say the top 3/8" link to the plate?why would these need to be replaced[say on a rod?].if one got damaged i could just cut...

need some advice on small riding mowers.looking at the cubs,crafstman,jd l130,husquvarna mowers.are the kohler engines better than kawasaki??i decided to rent a brushog and knock down the grass then maintain it with a rider.our tractor crushes the ground.looking back now i wish i would have...

after purchasing my kubota l3830 i have relized i have bought too big for a mower application on our property.with r-4's filled it just whieghs too much.it;s great for moving dirt/grading/lifting/brushhoging but as a mower its too big.now i need a wide riding mower 60-72""?? do they even make...

we have an old farmhouse about 1120 sqft and are getting qoutes from contractors for foundations around 20k$$ the thing is i,m not so sure about my job at boeing so i am thinking of doing it myself with some bottle jacks.from what i can see some of the beams are rotten and i notice some funny...

in the market for a contractors wheelbarrow with dual wheels 8-10 c.f., filled tires,steel handles, if i could locate one?any recomendations?

anybody seen or installed a dump hydralic kit on there pickup??we need to get a lot of dirt into our back fields and i dont think a big dump truck could get back there so i was thinking of installing a northern [catalog] dump system on my 2001 dodge 3/4 4x4.any input on the fit or function of...

looking at the danuser line.we have wet,black soil,not to many rocks.i was thinking 12" for auger.most holes will be for fence post's/planting small trees.what depth should i get 29,33,40" the model would be g20/40.thanks bws.

yesterday i was loading my new kubota l3830 with junk from are recently inherated farm when in the barn i found a large 5 gallon can marked "flour" i proceeded to pull it out of a special "milk{cool}room" and started hiiting the lid off with a hammer.the can was sitting in/on my tractor bucket.i...

do you tip it out at a angle or set it on the rails?have to pick up a used one[5'] saturday??I have a 3/4 ton truck.

After spending 15 hours on my l3830hst i think i have found some areas that could use improvement.Since i,m new too tractors and not a beliver of "kiss"this jmho.I think a shift on the fly range selector[button type]simular to n.h.'s rabitt/turtle button would be a big improvement for kubota and...

any info would help,do they have a website.guy has a used one for 3200.00 say it digs 7.5 ft.says its canadian??

i just bought a l3830 and after 10 hours am getting some clutch[hissing] or rear end [gear]noise after about 45 minutes of use???anybody noticed this as a normal thing??

is there only [1] first choice company??i am very seriously considering ordering there 66" 10 series rototiller and 20 series 6'boxblade and 20 series 7'landscape rake.is this a good tiller??

just picked up are first tractor a kubota 38hp[30 pto]we will be getting a brushog but have decided to just drag some disks around the back couple acres cause the tall grass is all folded over.could anybody recomend the a manufactor and type and size of disks we would need??thanks bws

i never would have thought all these things were possible.

what do you think of this for locking up a tractor in a remote location.[besides pulling fuse,keeping out of site ect.]i was thinking fabricating a 1.5" dia. 80" long bar that ran through the rear tractor rims.one end would be capped with a 1/2" thick round disk,the other end woudl have a cup...

interested in this line of implements for my kubota l3830 hst[30.5 pto hp]does anybody have some model rec's for a 66" tiller,7'boxblade,66"or 72" rotary cutter,7' landscape rake??[10 or 20 series???]i cant get any specs online for this equipment.bws

getting my new kub 3830 tommorow and am going to weld on 1 to 3 hooks on the bucket.i have seen some of the posts with reinforcement plates but i,m not sure i'll need them due to the heavy duty bucket[l7223] looks pretty stout on top.should be able to weld straight on.i will be picking up hooks...

wont start,pretty rusty,hyd case has been welded.some implements[cycle bar,blade,wheel weights,small rear mower[fabbed to fit]]4 cyl gas/good tires.we replaced this with our new L3830.we have an offer for 800.00??dont have a clue to what this is worth or even how old it is.wife sat on the new...

what would be a good size flatbed for a l3830 kubota?

what size boxblade,rototiller and landscape rake should i get for my l3830?i will be picking up a 66-72"king kutter mower and figure i might as well get it all at once as a pkg.should eveything be 6'?i measured my back tires @ 73"[r-4's],are king kutter's other implements well built?seems like...

who makes a 66\" brush hog mower i know king kutter does but does anybody know who else?i;m thinking this would be a perfect size for my new l3830 hst ,the back tires are 66"wide.

dealer has a new landpride rotary cutter 15 series[lightduty]5' for 825.00 instld.this is 40hp gear box with shearpin.is this a decent mower/price?would be nice to pick up my tractor next week with the mower installed.

would a new landpride 15 series[standard duty]rotary cutter for 825.00 be a fair price.is this a ok mower??40hp gearbox w/shearpin.

any info on this would be appreciated .i know it,s a 3pt mnt and retails for 4995.00

just bought a new l3830 kubota and am wondering if anybody has any tips for keeping it safe[besides keeping it outa site]anybody made a rod type lock mechanism??any sugestions?

well just bought the kubota l3830 4x4 hst,fold rops,723 fel,72"h.d.round back bucket with edge,r4 filled tires.20.5k$i think this was a good deal.looked a long time at the big three.thanks for all the input on this site over the past 2 months.tractor wont be in for a couple weeks.i need to get a...

got a deal on a great bend 752 3pt mnt no pump for 5300.00 and 6300.00 for frame mnt.both these would be plumbed into tractor.is a woods 7500 better?different dealer wants 5500.00 for a frame mnt woods7500.what do you think??any recomendations?

what would be the better of the 2 in the 5' size?

does anyone use this hoe??how does the frame mount look??is it a clean instalation?when you remove the hoe whats left??any info apreciated.

after 2 months of test driving green/blue/orange ive narrowed it down to a kubota 3830 hst/4x4/folding rops/723 fel/reversable cutting edge/72" h.d.bucket.sure liked the deere 4600/4610 but it was just too much$$[at least at these dealers in this area]and i know kubota loaders/hst are great so...

anybody priced these yet with hydro??

looking at a new 4600 a dealer has and cant get a brochure on it cause its a couple years old.any body know if this is a full sycro trany??any input on this model??

just wondering if the new warranty's are transferable to the next person i sold the tractor too??

anybody know if theres websites for used tractor values??dealer has a KUBOTA L36000 4x4/manual trans/fel for sale with low hours.trying to get a value.

couple questions about purchasing a new tractor.after purchasing a new tractor do you have to take it back for service at a particular point??the deer dealer says no,kubota not sure.and if you purchase insurance at the dealer does it cover your interest in the tractor[damage,your equity,ect]or...

dealer has two new ones here and wants 20,000.00 with 460 loader/73"h.d.bucket /powerreverser trany/4x4.what kind of deal is this.this is a two year old model?

did any 1 make/model/size stand out as being best and most inovative for the 2002 year?lets say [1] model up to 50hp and [1] up to 100hp.

i see the new holland tc30's going at 12,000.00 /manual trany/4x4.do any of the big 3 make a basic model witha sycro/manual trany?anybody price these basic models?i think the kubota l3000 is non syncro.just wondering.bws

any dealers in oregon/washington on this forum??bws

cont:so far i,m leaning toward the syncro tranny due to the folowing:price[to get a larger hp in a kabota hst=$$],speed,more hp to the pto,we will be working lots of implements[rototiller,mowing a large,open area,and no ditchs to fall into]i think maximum h.p. and traction are what we need[r1...

on there tc35/40/45 models with standard syncro trans for 2003?any dealers out there?

ok i,m ready to buy i,ve narrowed it down to the n.h. tc35[syncro manual] or tc35d[hydro]or kubota L3430hst.the n.h salesman and a indepent tractor mech tell me to get the manual syncro tranny but n.h. doesnt offer the 35 manual with the "d" package" bummer"[i love the seat,folding rops,ect]i...

i have a 1949 cub 2wd just got with a like new set of rear ag tires size is "9.5/9-24"??? if i order my new n.h.tc33d with r/4's can i buy some rims [front/rear] and mount these up on a set of 24"x? rims?how much do they get for rims.i know the r4 rims wont fit and i would have to buy a front...

i,ve narrowed it down to a kubota l3130/3430 or n.h tc33d/tc35d tractor with factory fel/r1's.i also will need a box blade/rear mower[is this called a brush hog?]what size should i get?i would like to negotiate these implements into the package or what should i expect to pay?is there a good site...

frame mount for 30-35hp woods,bradco,great bend??thanks

MY FIRST POST SO HERE IT GOES.looking at these two tractors in 4x4,hydro,r4's with fel.dealer wants 16,390.00 for the new holland and different dealer wants 19,200.00 for the kubota.should there be this much differance in price?the new holland dealer says the loader will lift more than the...