Search results

A club I belong to owns an MF 1533 with I believe a DL120 loader. The bucket curl and dump work fine. The loader up works fine. The loader down is a problem. To lower the loader, I have to push the loader stick forward a small amount, like an 1/8 of an inch. If I move it too much it...

Been a long time since I've been up here. Found a 716b that appears to be setup for rear PTO usage. Price is cheap, but its to go on a TC24d. Only weird thing it states it was converted to work with a rear pto. Hoping that could be undone ease enough. I don't have my manuals handy, but...

I can't find my owners manual right now, and everytime I get to where my tractor is it's dark and raining. Anyone know where the serial number is on this model? I assume its on a plate on the left side, but... Thanks Dave

Well, I can't believe it. 850hours on my TC24d, with a NH BH on it. Snapped the bellhousing case almost right at the connection point to the engine. I did some searches and found 1 other case on this site, but no BH. Anyone have this fixed before? Any idea of cost? Afraid of the heart...

Feel stupid asking this, but I can't find my manual right now. I saw somewhere where the mid pto ran at 1000 rpm vs 540. Any idea what speed this machine runs at? Thanks Dave

I've finally started on my forks for my TC24 and I'm almost done. I purchased a quick attach setup for my 12la loader, and finally put it on tonight. On my old bucket the pins are greasable, and have a threaded bolt on one side. The quick attach setup does not so the pins slide out. So I...

I am having some trouble with the the lower two bolts the connect the loader tower arms to the case. On the left side they were prone to looseing up so I kept a wrench and tightened them regulary. Well, I ended up lending my tractor out and he didn't check them. 2 were falling out, and one...

My mother has a 2135 with a Kohler command motor. It's been sitting for bit, and today I changed engine and hydro oil. Couldn't start it after. I change the plug and fuel filter earlier this summer. Good spark when I pulled the plug, and I can see fuel in the filter. It backfires a...

I am looking for Parts and User manuals for John Deere #5 sickle bar mower. I found some at SSBTractor.com, but at 53 bucks a pop. I've had good luck with eBay and will continue to watch them, but any other suggestions on where to look? This site John Deere No.5 Mower has some nice info...

Did a search didn't find anything. I am not a Massey/Agco/Challenger owner but I saw this at surplus center and thought you may be interested. Mowing decks for 299 (These are just decks, not blades, hangers....) Otheres up to 899 do include the essentials. Wish they had some NH ones. :(...

Been thinking about a snowblower project I need to do. Anyway, I need to speed up the PTO output, so I though I would use a set of gears and chain. What size chain should I run? I was looking at Surplus Center and they have quite a selection. Also, if I run a 20 tooth gear off the pto...

Does anyone else have trouble with this sensor when it's cold? When it's not below freezing all is well, but when the weather gets real cold for a long time I start having trouble with it. I can't start the tractor. I have to move the lever back and forth a whole bunch, then if I move it a...

I own one of there BB and felt it was really well built. I was just window shopping and noticed the dealers that I have bought from have little to none of there stuff anymore. They seem to carry more of the Landpride stuff, which is ok (I have one of there rear blades) but I don't think for...

I was wondering if someone has a bit of time and owns this loader if they could take a couple of measurements for me? I am trying to figure out how far off from the 12LA loader this is. (bucket interchange) 1. Outside Width of loader arms at the bucket (preferably near the pins). 2. Inside...

I installed such piece today, and though I only had enough time to install it, it appears there may be some issues with the loader hoses? Anyone else install one of these on the Class 1 boomers?

Not sure how many NH are interested, but I received a notice of a new DR Power store in Merrimack NH on the DW Highway. Grand Opening is 9/8 8:30-5 9/9 8:30-4 and 9/10 10-2. Maybe I'll see you there. I will be chasing the two yr old on Friday.

I came home and found the newest Acres magazine on the front yard. Seems the kids got distracted getting the mail to the house. Anyway, there is a story about a TC24 Fire rig. I believe it's a TBN member George! The pictures look great! Congrats!:D

Just curious, MSRP on TC30 and TC34a I was just wondering what MSRP on the TC30 with 7308 and TC34 with 16la is running. Anyone know?

I picked up this mower last fall cheap. Need to get some parts and I am unsure of what it is exactly. The person I bought it from listed it as a 5' Mott mower, but it is at least 6' long.

We have a 275 gal tank and a tank around 500 gals that we want to use for off road diesel storage. They are at different sites. I am trying to find regulations for there usage. Items such as containment vessels and such would be most helpful. I have done some searches on the internet and...

I was poking around and found some pictures of Shibaura's tractors on the internet. Here are two pictures with a TC18 and TC24 with cabs.

Here is a drag made to be pulled behind atv's and larger for road maintainance. We use the Mogul Masters for dragging our snomobile trails. Terra Master

Anyone see or use one of these before? Looks interesting, three section mower. Latec Mower

Sort of looking to get a set of Turfs for my tractor and the manual states 22x9-12 for the fronts. Appears Carlisle makes 1 tire that fits that size. The have 9 or so tires in the turf category. Can anyone tell me what NH puts on them? On a side note I picked up a set of Bridgestone PD1's...

Was wondering if anyone purchased one could share the cost? part number 715423026. Thanks

Your walking through the woods, and you see this fly by. I saw some stuff on eBay from Antonio Carraro and was checking to the website and I saw this.

Don't know if they were every made, but I was looking on eBay and found this: New Holland Seat . Not quite what I was looking for. Anyway did NH ever make a cast iron seat? Is there a repro availible? What about Ford? Just looking for one for my son's room. Thanks

I was wondering if anyone had a diagram or picture of a front mounted blower. I am interested in how the mid pto shaft gets power to the front.

I have been running these occasionaly to clean up some local beaches. One tractor is a 100hp Case the other a newer 75hp Case JX. They pull Barber Surf Rakes. CX 100 JX75

I purchased a cheap snow plow for my tractor. It doesn't come with the hydraulic cylinders. Anyway I was wondering why do snow plows come with two single acting cylinders vs one double acting? The reasons I came up with are: price, weight (balance), cylinders are stronger pushing than...

Just an fyi for those that live in the southern NH area. Cummins Industrial tools is having a sale at the Deerfield American Legion on Tuesday May 31st from 11:00 am to 7:00pm. A lot of this stuff looks like Harbor Freight stuff rebranded, but there are some name brand stuff t00. Stanley...

Got to check out this: Flying Lawnmower

check out my album. Wish I got to see it in person. NH TS Tracked

I am having an issue with my TC24d. I live in NH, and it's been really cold, and when she sits for a while like 24hours I have to move the range selecter back and forth a lot, then I have to sort of fine tune where I put it so I can start the tractor. Once it warms up, this is not an issue...

I busted a pintle hook last night, not so much the hook but the cam the keeps the upper part from lifting. I did a quick search this morning but I can't find just that part. It was 2:00am when it happened so I didn't look to see who manufactured it, but is this part interchangable? Thanks

Our Snowmobile club is setting up a new/used fuel tank. We had it sandblasted and painted, and put it one of those leakage barrier things. It's a 500 gallon tank. We want to setup a electric fuel pump on it. The problem is our oil company (that delivers our diesel) wants $1000 to do it...

Hi, I have this Cat control valve that has 6 ports. 4 ports are for the controls but that last two ports I don't know what they are. One Port is marked with a T next to it, and the other has P. Any Ideas? Thanks

I just purchased a snowblower that was driven by a hydraulic motor. The motor is no longer there. I would like to convert it to PTO use. It turns the right way. It is setup to take a 1" shaft with a key. So, any suggestions on how I should do this?

Saw this on ebay Broken Tractor

My knee hurts. I was doing a lot of boxblading yesterday and I keep bumping the light switch. Has anyone moved it? I know the TCda's fixed this. Thanks

Noticed in an ad for the TZ series the mention this for a Snowblower. This was in the Acres newsletter/magazine. Is this like the JD I-Match thing?

Saw this on eBay. eBay quick Attach plate I am looking to fix something up to remove my bucket and put forks on. Don't want to go the clamp on route. Not really looking to use skidsteer attachments (TC24). I have seen some of the discussions on the kubota version and I think I have seen...

Saw a Corriher 72" york rake today. I have been wanting to buy one but I haven't really needed it yet, and I have been hoping to find a cheap used one nearby. So when I saw the Corriher rake I had to stop. Being in New Hampshire you don't run into too much stuff from North Carolina and...

I have one very old garage door opener (sears) and one newer (80's chamberlain). Between the two doors I have one working remote. The openers work fine, but I could really use a remote that would open both. I bought a universal garage door remote (one click or something like that) and it...

Looking at a hydraulic control valve that has an advertised input pressure of 1600 PSI. Is this enough?

Saw this pic on another site I visit. Thought it was pretty cool. Tractor +t +t +t picture 360 hp Versatile, 40 ft Bourgault air drill, 350 bushel air tank and a 2000 gallon anhydrous ammonia tank

If you don't need a loader this is a pretty interesting product. Sort of like that really expensive Bobcat cabbed truck thing. TerraTrac

Any suggestions on how to accomplish this? The fuel filter is on extremely tight, and access is quite limited (FEL bracket). I needed to do something for the neigbor so I didn't want to break something. The rest of the fluid/filter changes was quite easy to do. I thought JimG had the same...

I am looking for M10, socket cap screws that are fully threaded. I can find partially threaded, but I am having a hard time finding what I really need. I have attached a picture of what I need, except this is not fully threaded. Thanks

I am interested in buying a trailer, 7k load, 18-20 foot, dual brakes. Prefer one without sides, wood deck, and 10k load, but for the right trailer willing to bend. Last thing, in NH, Southern Me, Northern Ma area. Just started looking, wondering if anyone from New England has any suggestions.

I really like the article on the guy running the Bidirectional tractor use two 18' Mower Conditioners. I was curious though why not mount one on the front than tow the other off the back? Can the front 3pt hitch lift less than the rear?

Ok, I feel kinda stupid but I am having trouble with this little switch from Radioshack. It has three inputs, one ground, one load, and one power. It is a lighted switch. It currently works (the worklight), but the light in the switch does not. If I attach a wire from the ground plug to a...

Couldn't find any reference to this gentlemen in a search. This guy builds awesome scale models of equipment. Not just construction equipment, but a lot of farm equipment to. Incredible work. Don Campbell Website

New TC24d, 12la fel and 756c bh Derek and Jacob testing her out.

I will need to remove the BH from myTC24d soon, and was wondering if anyone has done it before. It looks like there are two pins up front, Bolts? for the rear axle? Also, the manual shows straightening the bucket arm all the way out for remoal. Is it really necassary? I assume it's safer...

A friend saw these at a nearby dealer. Price wise they are the same as the Puma and Meteor. One nice feature though is they have an electric chute rotator.

Looking at a TC24. Notice this weekend that there are grey buckets, and black ones. I saw them on the 12LA and the older loader. The black ones seemed stronger, so I assume it's a HD version? What's the price diff? Unfortunatly they were closed when I passed by. THanks Dave

What\'s comparable to a New Holland TC24? I am currently thinking of purchasing a TC24D Hydro, FEL, BH. At the website it looks like the 1225/1230 would be closest match. A friend stopped by the dealer, but they had no Hyrdo's out. Any idea what pricing for one of these are? Thanks Dave

2210/4010 FEL \"Float\" I looked at the NH TC18, B7500/BX22, JD 2210/4010. The NH and Kubota's have a Float position with the joy stick. When I asked the JD dealer about, he said yup, it has it. So I asked which way do you push the stick, and he stated it will automatically float. So, I...