Search results

hey guys, a friend of mine is thinking of buying a tractor mounted rototiller for his tractor and is needing some info before buying one. He has a older 601 ford tractor. i think its about 35 or 40 horse. What are some of the features to look for in a rototiller and which brand seems to give you...

hey guys, i have a 1972 massey 135 with the perkins 3cyl gas engine. i noticed this morning that after running it for a short period and shutting if off, i had a small amount of gas leaking from the weephole under the carb, and was wondering if this was anything to be concerned about. I am not...

hey guys, i just recently got a 1972 massey 135 and dont know alot about it. first, i was wondering if i have the independent pto or not. i read the manual but cant tell if mine is transmission driven or independent. The pto lever has two positions, which are written on the tractor, neutral and...

hey guys, i screwed up my right fender on my 1972 massey ferguson 135 and need to buy another one. Mine is the clamshell type. any info would be greatly appreciated.

hey guys, just bought a 1972 massey ferguson 135 with the perkins 3cyl gas engine. The fella i bought it from has been using a 5foot bush hog with it, but i was thinking about running a 6 foot and was wondering how you guys with some experience with these older models, might think about it.

i am getting ready to buy a 6 ft rotary mower and have found that different brands have different size gearboxes for the same width cutter. where does the size of the gearbox come into play as far as performance. i have a 30hp tractor and am looking at a 6ft cutter with a 45 hp gearbox, which...

i just purchased a kk middle buster and am having trouble getting it to dig the full depth of the furrower. i have adjusted my top link several different ways, but to no avail. i read a post on here, quite some time back, that mentioned something about using a shorter top link and was wondering...

hey guys, i have a L3130 hydro, and was thinking about buying a 6ft howse bush hog, but not sure if my tractor will handle it or not. i have been using a squealer 5ft hog with no issues, but have r4 tires, and the 5ft will not cover my tracks, so thinking about going with the howse 6 footer. my...

hey guys, i was wondering if somebody could give me some info on if they think one of these old rotary hoe cultivators, might work for what i need it for. i have a large outdoor horse arena, with a clay base and about 5 to 6 inchs of sand on top. Afer a rain, it crusts over and i use a small...

hi guys, i am having an issue with my rotary cutter and was wondering if you guys had any ideas. i have a 5 foot bush hog squealer and when i run the rpms up to 540 it vibrates the whole tractor. it is ok, at about 480 or so, but any more than that it really vibrates. i have high lift blades...

i have a kubota l3130 with loaded r4 tires, and pull a 5 ft squealer bush hog. my field always look bad after i cut, because the heavy loaded tires smash down the grass and then the clippings lay in the tracks. my neighbor has a to 30 with r4 tires and a cheapie bushhog and his field dont seem...

hey guys, i am thinking about buying a new landpride fdr2584 rear discharge finish mower. It is a 84" model, and was wondering if it would be too much for my Kubota L3130. Also was hoping someone that owned one of these mowers, could maybe give some opinions on quality of cut, etc. Just...

hey guys, i have a 100' x 220' outdoor horse arena, and would like to try to put up some lights, and dont want to spend a fortune doing it. love to hear how some of you guys may have done it. thanks

hey guys, i know its been posted on here a few times about how to rig up a piece of pvc or pipe, to a subsoiler and use it to pull and bury underground wire, but i am still a little confused. when you start the run, do you rig up something to hold the roll of wire, at the beginning of the run...

my brushhog and finish mower, are rated for 540 rpm. i have a kubota 3130 and to maintain this 540 speed on equipment i have to run my tractor at about 2500 rpms. will it hurt anything to run the equipment at lower than 540, so i dont have to wind the tractor up so much?

I have a landpride 5ft side discharge finish mower, and am thinking about trading it off, for a 6ft model, and have been looking at the fdr1672 landpride rear discharge model. the mower i have now cuts tall grass pretty good, and disperses the clippings fairly well, and just curious how much of...

hey guys, will a L3130 handle a 6ft rotary cutter, if i am just cutting pasture?

i have a 3130 with a 5ft cutter, and thinking about going to a 6footer. most of my work with the cutter is pasture clipping, and very little really heavy brushy stuff. my question is, will my tractor and hp handle this cutter in this application.

hey guys, i have a L3130 HST with loaded R4s and a bush hog squealer 600 rotary mower. the mower cuts really good and the tractor pulls it with ease, but when i am done, its looks terrible. it leaves all the cut grass and debris in the tire tracks. i have the high lift blades on the hog, and the...