Search results

Can anyone show where to draw the hydraulics for a front end loader. Neighbor is installing one on his 1986 884. Thanks, Don from Canada

I have a Kubota B2320 with 264 hours on it. Is it common for this unit to have glow plug failure. When I start it now it fires on one cylinder for 10-20 seconds then picks up and starts on the other 2. I haven,t called my dealer as it is Sat night. Any input??

I have a 1967 Massey 165 and ever since I got it it has had 80/90 gear oil in the trans/3point. The 3 point and impliments are slow:mad:, is this correct oil or not:(? Thanks, Don from Canada:confused:

I posted earlier this month asking if anyone has or has access to plans to build a quick attach to fit my Massey 165. I have 4 front attachments and do not use them to thier full potential because they are a pain to change. Can anyone help me?:) Don from Canada

Anyone got a set of plans or a site access to aquire plans to build a front quick attach? I have a Massey 165 and 4 attachments to convert. Thanks, Don from Canada:)

Just doing the initial 50 hour service on my B2320 and need to add oil to the hydrostatic transmission. Manual says use Kubota UDT or Super UDT. My dealer is 500 miles away. Is there a name brand oil that will work? Thanks,:confused: Don from Canada

I have a new Kubota B2320 and just did the initial 50 hour service. What oil can I use in the hydrostatic transmission? The manual says Kubota UDT or Super UDT oil. Is there a brand oil that is similar? My dealer is 500 miles away and I would like to buy locally. Esso, Chevron,Shell :confused...

I have a B2320 Kubota and wonder if it is big enough to handle a post pounder? Anyone know? Don from Canada

Any Kubota dealer or rep here that can tell me when a mulch kit will be built for a RCK54-29B mower? Bought my B2320 new this summer and dealer said Kubota was out of stock on the mulcher. Further investigation shows they have't even made one for it yet. SO for now I have to keep my husky mower...

I bought this tractor and mower new this summer and I wanted to get a mulch kit for the mower. Salesman checked with Kubota and was told they were out of stock. I contacted another dealer to see if someone stocked the kit. He got back to me and said that Kubota has'nt built a mulch kit for that...

My neighbor has a Belville harvester and is in need of the cross links for the moving floor. They are about 16" long with curled ends. Any help out there? Thanks, Don from Canada

Anyone got plans for building a brush grapple to mount on the front of a tractor. I don't want to build it on my bucket, I want it to pin right onto the boom. Something about 5' wide with ??? forks and 1 or 2 top forks on hyd cylinder to hold load. I have lots of tree tops and limbs to pile and...

Well couldn't wait for it to warm up so I used lots of driers and painted it in my shop. Some pics of a beautiful sunrise today---Boxblade finished---My tree pulled picker upper-another project, this is my wood splitter as the drawbar and the engine runs both the splitter and the dump box. I...

Box blade is done but too cold to paint, even in my shop.:(:( Our Dexter cows love this weather so I hope to show a couple pictures of them. :D:D

Not much of a winter project. My problem is when I start something that is fun I can't stop. I now have 12 hours on the project in 2 days. Tomorrow I will get material for the rippers and also start on the 3 point brackets. Hope my pictures work as I am pretty computer illiterate.

Yesterday I ordered a 3/8 x4 x 8 sheet of plate,3 lengths of 3/8x2x2 angle 1 length of 3/8 x 2 flat bar and 1 length of 1/2 x 3 flat bar. My local machine shop sheared and bent the back of my 80" box blade 21" high and bent to 80" with the bent ends to reinforce the sides. I have a 6" I beam to...

I have a Massey 165(1967) and wonder what size box blade it will handle. I have plans for a couple blades but don't know what to build. My tractor is about 6'4" outside the rear wheels. Any ideas????

I have a 1010 that I aquired and have done steering repairs and u/carrige work to and now want to sell. Problem is the engine starts fine but pops and farts til it is warm and even then pops. If I work it hard it runs fine under a good load but pops a bit when idled down. I did compression test...

Anyone have plans to self build a box blade? What sise will my Massey 165 handle. I live up north in British Columbia and to buy and ship one would cost too much. Thanks

What size box blade will my 165 handle? They look like the cats xxx for leveling my field and maintaining my driveway. I am a retired welder mechanic and are there any plans I could download to make my own? I live in norther British Columbia and freight to get one would be more that the cost of...

I have a good Garden Way sickle bar mower and can't find knives for it. They are 2" wide by 3" long. Rivit holes are 1 1/4" center. Can anyone help me find some? I can redrill the bar for the rivits but need the 2" width to maintain the timming. Thanks email me...

HELP PLEASE: I have perfectly good Garden WAy Sickle bar mower but can't locate knives for it. The are 2" wide by 3" long and the rivit holes are 1 1/4 center. I can make a new bar if holes are wrong so can anyone tell me where I ca get 2"x3" knives? All I have found are 3" wide and that would...

I have aquired a nice Gardens Way mower. They are out of business but does someone else handle the knives for it? They are 2" wide, 3" long and the rivit holes are 1 1/4 apart. I would like to buy a set and the rivits also. Perhaps some other brand will fit, these ones say made in France...