Search results

Hi, guys. My 2009 Kubota B2920 Battery is finally getting to weak to start my Kubota in cold weather after only 10 Years! Pretty amazing. Anyway went shopping for a replacement is there anything special about a battery for a Diesel engine? Of just Match the class and CCA. Oh and how do I get...

Looking at picking up a Woods 60 three point snowblower That has never been used. It s a great deal. But I’ve never used a three point snow blower. Any input? Do you like yours?

How would you guys go about fixing the damage I caused to my yard after running power and water out to the barn with a trencher. Thinking about my 50” tiller. But it was just a little trench. I tried my York Rake but the soil is clay and it’s been raining allot lately. Obviously no Harley rake...

We built a new pole barn and am looking for ideas on floor drains. Can you post a picture of your? Looking for ideas. Thanks!

Hi Guys, looking for a BH65 for my B2920 either Kubota or Woods. Closer to Michigan the better. Let me know if you see one or have one to sell. Thanks.

Anybody use one of these? Seems handy, but seem like it could damage my light weight bucket pretty Easy? Thoughts? Kubota B2920 I would be using it to pop out old bushes and dig shallow trenches.

I’ve never used a rear scoop. Wondering if I would be able to dig a trench with one? If so how deep would I be able to dig with one? I have a loader on my Kubota B2920 just trying to figure out the best way to run some 4” PVC drainage tiles. I know rent a trencher....

Could you guys post some pictures if you have the Tarter Gauge wheel kit on your landscape rake. Wondering about mounting the the bracket that mounts the the rake upside down. Or turned over. Pictures would be helpful. Wondering if it would make them to short on my rake.

Anybody know of a set of Guage wheels that would easily work on my Woods rake? I’ve found the Tartar set and the King Kutter. Anybody had luck with these?

Looking for a Snowblower for my B2920 Michigan.

Looking for a nice 4' or 5' Brush hog or Flail mower for my B2920 Thanks. Lansing Michigan.

Does anybody use the sub compact Rotary cutter from TSC? It's a cat. 1 so I assume it will fit my B2920? Looks better built that the other 4 footer they sell? Os would i be better off with the heavy duty Countyline...

Hi guys, warm weather here today so I thought I would start my B2920 that I haven't run for a month or so to warm it up and charge the battery. Anyway the fuel was getting pretty low, all of a sudden it shut off after running for 10 min or so just like the key was shut off. Now the key doesn't...

Looks like he made it though another year.

Hi guys, I recently did a trade on a 99 GT235 that has sat outside uncovered for at least 5 years in someone's yard. It has the 44" mulching deck. The lady I got it from said it was in running condition when it was parked? Her husband passed away. I haven't even had time to look at it, or try to...

Just changed the engine oil in my B2920 when I checked my front axel after running it the gear lube looked foamy? Is this normal? I only have about 20 hours on the lube but kits been over a year since I changed it. I have A total of 77 hrs on this 09 thanks.

Just picked up a Brush Hog with a bent tail wheel. How should I straighten it? I might have to heat it up, or maybe a long pipe? How would you approach this? How does this even happen? Must have backed into something, this is just a little 4 footer. Thanks for the ideas.

Looking at a Bush Hog FL60 flail mower. This seems to be more of a finish mower? I need something for over grown weeds 3' tall with some 1/2 Box Elder saplings with this work? Or is there a heavier duty flail mower I should be looking for. Or just go with a Brush Hog mower? I have no...

Looking for ideas on what or how to lock a sliding barn door like this. This is how it was when we moved in. I have looked at the box stores but don't really know what I'm lookin for. Thanks for the help

I have a 2004 Simplicity 20hp/50" zero turn and I need to service the Hydro drive sysytem this year I think? Anyway I'm looking for a service wright up on this does anybody know of onw :thumbsup: I don't even know what hydro oil is required? THANKS

How do you guys keep the weeds down in your Asparagus patch? Mulch, Salt, Herbicide? What do you use? Any tricks are REALLY appreciated. :thumbsup:

Here's what I came up with today after carefully studying everyone else's.

So I almost ordered a Iowa farms tooth bar from Ebay and then I ran across this thread... :mad: Got my Iowa Farms toothbar today - TractorByNet.com Kinda liking the flat tooth bar. I have never had a tooth bar before and just want to make the right decision the 1st time. Which is better? :confused2:

Howdy, I have read about drilling the hole to add a tooth bar at the front oof the slot and at the back....Which is better? and why. I think I'm going with the Iowa farms tooth bar and before I drill my bucket I would appricate your input. Thanks :confused2:

Just thought I might check here. We are looking for a 13' - 16' fiberglass camper trailer like a Scamp. If you have one out behind the barn you may consider selling or one ready to roll, or even if you know where one is avail. Please let me know....Thanks!:thumbsup:

Does anybody know the pt.# for the ROPS Knobs that keep them from rattling, and that should be included with the tractor :confused2: I think I remember hearing the knobs from another tractor fit it BX? Thanks

Does anybody have the B2920 Front Snow/Dirt Blade? If so how do you like it? Never even seen one Just on Kubota wedsite. How much are they? Thanks:drool::drool:

This is a repost from the oil and lube forum.....:o I hope someone here can help me....I'm in the middle of servicing my Kubota B2920 and can't find the Trans strainer???? I don't think it has one.:confused: Its not even mentioned in my owners manual. But neither was the 2nd engine oil drain...

I hope someone can help me....I'm in the middle of servicing my Kubota B2920 and can't find the Trans strainer???? I don't think it has one.:confused: Its not even mentioned in my owners manual. But neither was the 2nd engine oil drain plug. So I thought I would check with the pros here. Does...

Just checking if anybody knows of any new 50 hr. service write ups for the B2920. I'm tackling it today and just checking in Thanks.:thumbsup:

Just getting ready to install a couple culverts in our woods on our Golf cart/ Tractor trails. Just checking to see if there is anything I haven't thought about. Tricks to keep them fee flowing and clean.

Hi guys. My log tongs are due to arrive today :thumbsup: anyway I'm trying to figure out the best way to hook them to my draw bar because they have a chain hook on them. I would like to keep the swivel. and I would like to keep them as close to the tractor as possible so I can lift the front of...

Just looking at a used one. Wondering the used value? York rake. It has a blade, leveling wheels and scarifier. Its 6' how much are they new with these options? Thanks

Just realized there are two engine oil fill spots on my B2920 why?:confused2:

Looking to do the 50 Hour service on my B2920. Looking for a online source for the filters and oil. Thanks :thumbsup:

Looking at a Land Pride RTA 1550 tiller that was used one time. How much are these unit new? are they good tilers? I have the opportunity to purchase it for $1200 used one time. Would a County Line 50" New on sale for 1199.00 be a better deal? The land pride was used once. Still has paint on the...

Does anybody run a 60 King Kutter tiller with a Kubota B2920? They are on sale this week for $1399.00 seems like a pretty good deal. Just wondering how my tractor will handle it. King kutter recommends 25 to 40 pto horse power. Thanks

I am going to look at a 10 yo TSC Tiller (King Kutter) not sure? He says it pretty worn. and has sat in the woods the last three years or so. My question is any idea how much i would be looking at for new tines? What else should I look at besides gear box lube? The price is right other wise I...

We bought our Kubota across the boarder in another state. At that time they didn't collect sales tax because we where out of state. So my question is usage tax reguired? Thanks

Ever been walking through the woods at night And had the sensation that something was following...... This picture is from Hillsboro wi area, Where someone set out a motion sensor camera To see if any big bucks were passing in the area.. It's a one in a million shot!

anybody ever use a box blade for snow removal? I have been using my back blade but I was thinking my box blade might work good for a few inches of snow. Thoughts?

I have noticed some tire wear on the outside edges or me R4s on the front of my tractor 27hrs. Is this normal? Just checking to see if I should add or remove air? What PSI do you guys run? Thanks...

Mini Dozer Frontflip FaceplantVideo :eek:

Anybody using a COUNTYLINEｮ CARRY ALL? Do they hold up OK. I'mm going to pick one up to build on to carry tools and firewood. Thanks

In the market for a new Deer light. Anybody have one they really like? What brand where did you get it? Thanks

Looking for pictures of rear work lights on your B series Tractors. Pictures would be great. How did you wire it? Thanks

Too bad he has his John Deere PJs on:confused:

Sorry. I quess I don't know how to link a video here from my email? Thought you guys might enjoy this.

Never used a landscape rake. Can the top link be adjusted to make them less aggressive? Would it be possible to use on a lawn for leaves? Thanks

When I have my B2920 in four wheel drive should both front wheels spin when loading the bucket? Only one will spin at a time. Just making sure this is normal? I was thinking they would both be locked in? I guess that would make it hard to turn though.

Does anybody know the part # for the armrests for the B2920? Is there a good place to buy them online? I can't seem to find them anywhere. Thanks:confused:

Will 60" Kubota Mower blades part # KO71-7751 fit my RCK60-29B Mower deck off my B2920? Thanks

YouTube - Bob Cat wood splitter

YouTube - Bob Cat wood splitter

Looking for ideas on how to lock my sliding barn door from outside? I have no passage door so I need to lock my slider from outside. Currently has no lock. Thanks

I have a 30 year old white metal pole barn roof that leaks at the fasteners. Anybody know of any good spray or roll on sealers? Anybody been down this road with advise would be greatly appreciated.....Don't really want to pull all the nails and use screws but if thats what it takes. THANKS:confused:

Looking for ideas on adding a lean to on the back side of my barn. Mostly for fire wood and implement storage. Could you guys that have a lean to show us what you have. I was also thinking about one of those metal carports. If you have one how do you like it? and what brand is it? Thanks guys.

Are they used for the same thing? Which is better? I see the county using a flail mower around here to mow ditches. So it git me thinking.

Can a B2920 run and lift a 5' Brush hog OK? The owners manual says 48" but I think I have read on here of other members running a 5' I have found a deal on one thats why I'm asking. Thanks...

Can someone tell me what engine oil came in my B2920? I want to stick with the same stuff. I'm a little low and only have 20 hrs. I tried this in the oil section but didn't get much help. I figures there where more Kubota dealers looking over this thread. Thanks

Looking a rear blades for snow plowing. Is a 60" blade wide enough for a 49" wide B2920? I have a smoking deal on a used 5' land pride blade. Will I regret it when its angled? I like it because I can get through the woods with it.

Can someone tell me what engine oil came in my B2920? I want to stick with the same stuff. I'm a little low and only have 20 hrs. Thanks

Just wondering what the value of a Land Pride post hole digger is? Its 3 years old has a 10" bit and hardly been used. any idea what they go for new? Thanks

I have a B2920 and am trying to figure out what kind of pin I need for the third link? Or top link. Also need th diameter. Thanks

Just wondering if the loader on a B2920 is adjustable at all? Mine set a little lower on the left side? I don't think I bent it in my 11 hours of use?:eek: Or is this fairly normal? Thanks

My B2920 throttle seem to be too hard to adjust. How tight should it be? Can it be adjusted? Thanks

Picked up my B2920 yesterday. Getting ready to mow with the 60 MMM today. It doesn't say in the manual what RPMs the engine should be run at to get the appropriate MMM RPMs. What should it be run at? Thanks

Hey guys. I'm getting my new tractor tomorrow. I need advise on how to chain the front end down without causing damage to the machine? I'm putting a clevis in the rear hitch to chain through. Its a B2920. Thanks

Going to pick up my B2920 out of state tomorrow my buddy thinks it that its illegal to use 3" heavy duty straps and that I must use chains? I do not want to scratch my new machine. Has anybody heard this before? Thanks

Looking for a place or a dealer that offers online OEM Kubota filters oil and assories? thanks

What size impliments is a 2920 rated to run? Are there different catigories? Anything to look for if buying used? Thanks

Hi Guys, We have a field that is approx 2 acres. Just trying to get some ideas on what to grow out there? Thinking something like sunflowers. Something that will attract wildlife. Also is there a cheap pasture grass for shaded areas? Looking for some thing cheap for around our bridge in the...

Looking at a deal on a B2920 He said it was shipped in 08? Does that mean its an 08? Any way its making me wonder if I should pay more for an 09? Should I worry about the first model year. Was ANYTHING changed in 09? Thanks

What size Brush hog, Tiller and Box blade is the B 2920 rated for? Anybody know? Thanks

Anybody know how many horse power a 950 is? Thanks

Looks like Kubota is now offering 0% for 48 Mos. I may be mistaken but I thought it was 42 Mos. Kubota Tractor Corporation - Promotional Rates

Received a quote for a B3200 today with FEL R-4 tires for $16,100 no mower deck. Can I do better? Thanks

What did you pay for your B3200? Thanks

I really need some help. I was going to purchase a New B2920 MMM & FELArond $16,500. Then I ran across a friend of a friend that is selling a 05 B-7800 witharound 300 hrs 72" MMM FEL 4' roller back blade and more. ASKING $12,000 seems like a pretty good deal? Can't decide. HELP

What is a GOOD price for a B2920 witha FEL & MMM ? Thanks Guys. Ready to buy...Want to think I'm getting a good deal!

Hi guys. I'm a noob here. I have a great deal going on a B2920 FEL & MMM right now. I have a few questions first though. I would be replacing a 04 Simplicity 50" Zero turn mower. My question is how are these a at mowing? Is it to much tractor for my lawn? I mow approx 2 aces. Own 6 Also really...