Search results

I have a 4110 with nearly unused AG (R1) tires. I ordered the tractor new with these R1s because where I was located, I expected to be using it in a muddy soil condition. As it turns out, we had to move and I am doing more pasture mowing than anything. Now I wish I would have gotten R4s for...

I have a John Deere LX178 with a 15HP Kohler-John Deere engine. The mower starts easy, runs and cuts grass for about 20 minutes, and then suddenly will shut off as if the key was turned off. Mower will not turn over or even try to turn over. Wait about 5 minutes and the mower will re-start...

I asked for R1 tires on my 4110, and they have worked out fine, but now I have moved and using the tractor for work that R4's would be better (not tearing up the yard for example). So now I need to find the best way to switch from my R1s back to R4's. I called my dealer, but no suggestions yet...

I have a 2004 4110 and FEL with about 400 hours on it. It is in immaculate condition, and looks showroom quality other than the bucket is scratched up a little from use. Otherwise, it looks and runs like new. I am only selling because we are selling our farm due to my father's accident 2...

I\'m glad everything is not built like my 4110 I'm sure this will flare up a few, and I don't mean to, but I must say that everytime I use my 4110, something breaks. I try to be extra careful with it, but nevertheless, something breaks. Doesn't happen if I drive my 4-wheeler or my other...

I\'m a Mahindra owner, and my dad needs your prayer Hello everyone. Some of you may have seen a few of my posts around here regarding my 4110 Mahindra. Today, I am posting a message, asking for your prayers for my Dad. He was working on our farm, and a dead tree came down and struck him...

I have a strange problem on my 4110. My PTO will work with no problems until I use the FEL quite a bit, and then try to use the PTO, and it is a "no-go". I then have to press the solenoid button (reset), and the PTO will work flawlessly every time. But then, if I go and use the FEL to move...

Prior to attaching my new rotary cutter to my 4110, I flipped on the PTO switch(Auto) and pushed the red PTO button. Nothing happened with the PTO. Put the lift arms up, put the lift arms down, and still nothing. Increased the RPMs to 540 level... Still PTO did nothing. Moved the lift arms...

Bought my new rotary cutter this weekend. Rhino SE6. It works great, and is surprisingly quiet. On my Mahindra 4110, the engine RPM speed to reach 540 PTO seems really high. Anyone else think so? That is a higher engine speed than I have ever ran doing anything so far with my 4110. Is it...

In an effort to be halfway loyal, I was trying to buy a rotary cutter from my Mahindra dealer, and he is showing me a 6ft Mohawk-Brave dome deck (Ag-Meir). Anybody have any ideas on this brand or other brands? I was interested in a Woods b/c of the ease of blade removal, but the price of the...

Looking at Mohawk Brave 6\' brush hog. Need advice I'm looking to buy a 6' brush hog for pasture mowing & weeds. Got a price on a dome deck Mohawk Brave 6' (manufacturered by AG-MEIR) of $900 from my dealer. Also looking at other brands. Any advice on brands/design?? Looked at the Bush...

I spoke to my Mahindra dealer regarding the purchase of a Mahindra 509 (Bradco), since I hear it is an awesome unit. But my dealer is encouraging me to go with a 3 point backhoe instead . Possibly the Bradco 3 point. He says he would go with the 3 point over the subframe because the subframe...

I have an opportunity to buy a "Kelley B30" 3 point backhoe. The owner says it is in good condition with everything working and no leaks. Has a Separate PTO pump. Is asking $2500 for it. I know nothing about this backhoe, and can't find anything about it. The current owner has it mounted...

Moving Mahindra out of \"Other Brands/Equipment\" All those in favor of moving the Mahindra discussion from the "Other Brands/Equipment" section into the "Major Manufacturer" section or its own section respond by saying "I"

This is in no way an advertisement for these folks, but I found a place to buy fun stuff with Mahindra logos. I searched on the web for Mahindra shirts and came across a website that looked like a Mahindra storefront. They have all kinds of good stuff on there. They have shirts, keychains...

Why is there not a \"Front Differential Lock\" Is it common to not have a "front differential lock" on a 4WD CUT? I sure wish my 4110 did. I can not tell you how many times I could get unstuck easier if the front could be locked to turn at the same time like the rear can.

I think Willman asked this same question, but no responses, so here it goes again. The brochure for the 10 series mentions auxillary 12volt connector. I assume it is the connector in the rear that looks like a trailer connector. WHERE do you get a connector to fit that thing?? I guess you...

I am wondering if Mahindra mounted the stabilizer turnbuckles "backwards" on my 4110. These turnbuckles have a locknut closest to the implement. I tighten the turnbuckle, tighten the locknut, and they still get loose. Looks like they mounted the locknut where the turnbuckle couldn't get any...

I would like to add a hydraulic top link to my 3 point hitch, replacing the manual top link. My question is, where can I buy this hydraulic top link? I hope that I can hook it up to the rear remotes, and use the little lever next to the position and draft control levers to operate the top...

I have been investigating WHY my parking brake suddenly won't stay engaged on my 4110. I noticed that if the brake pedals are clipped together, the parking brake lever will not hold, but if I unclip the brake pedals and only press down on the LEFT brake pedal, the parking brake lever will hold...

Parking brake won\'t stay engaged On my 4110, the parking brake won't stay engaged. It was working for a while, but now when I try to set it, it just pops out. Any ideas anyone, other than "call the dealer". Don't want to haul it all the way back to him for the parking brake.

When I was delivered my 4110, the tires were filled with air only. I have heard of some dealers shipping their Mahindra CUTs with the rear tires filled with windsheild washer fluid. How was yours delivered? Also, how many of you have filled the rear tires yourselves? With what and how?

Just to update my previous post regarding removing the Mahindra FEL, today I removed the ML112 on my 4110 for the first time. It was really easy. Then I re-connected it, and it was just as easy. Took me less than 10 minutes to remove it, and less than 5 minutes to re-connect it. And that...

I was considering removing the FEL and trying to RE-attach it, just to see how difficult it is to do. Has anyone tried doing this? I have the ML112. I have heard that it is a knuckle buster. Is this true?

I am about to buy a new brush hog for my 4110, and would like some advice on what size to buy. I have a small 4 footer on my Ford 2N, and it is just too small. I would like to get either a 5' or 6' for the 4110. I mow mainly pasture grass (mixed bahaia, and what I call "bunch grass"). 2...

I have a Mahindra 4110 with the 112 FEL. I have noticed that if I load the bucket full, and have the bucket tilted all the way back (so that the dirt will not fall out), after a few minutes, if I move the control stick to the left, the bucket will move back some more. Then if I wait a few...

I am interested in getting a 509 or 511 backhoe for my 4110. I have not yet visited my dealer, but I would like to know approx the price range on these units. Just so I can know if I am getting a decent price when I visit the dealer. Thanks.

I find that when using the FEL, I use M, 3 or 4. I have a 4110 and I am curious which gears everyone else uses. I find that the High gears are just too fast, and the Low gears are just too slow. Also, what RPM?? Seems like 1500-2000 is running very high and loud. When using the FEL, what...

Since it has been a while since the last post here, I thought I'd let everyone know that a large Mahindra discussion is taking place over on "Buying/Pricing".

I was somewhat interested in purchasing the 509 or 511 backhoe for my 4110. Who here actually has one of these and how well does it work? Have you had to do any "special" modifications to make it work properly? I am concerned because looking at the specifications for each backhoe, it reads...

We have an old pond (small tank) that has sediment built up over the years. I think it used to be about 6-8' deep, but now only about 3'-4' deep. Some places even shallower. I am draining it and it is almost all drained at this point. My question is, how long will it take to dry out if it...

Is the Mahindra 509 backhoe the same backhoe as a Bradco?

Approaching the first 50 hour maintenance on my 4110. Lets see: Oil, Oil filter, Hydraulic fluid and filter, transmission fluid and filter, front axle fluid. Good grief alot of stuff. Gonna cost nearly $200 by the time I'm done buying stuff. Anyone looked at the manual?? Poorly written in...

Today, pushing a brush pile, a small branch pushed on the grill of my 4110, and VOILA there is already a crack. AMAZING, I had my Ford 2N for years without a dent or major scratch on the hood. The Mahindra 4110 body is very heavy duty, but that hood is panty waste lightweight period. I am...

Hey guys. I am just getting to know my 4110. Have only been doing light duty work so far, and approaching the 25 hour mark. I have a few questions: 1.) There are 3 levers to the right of the seat: Draft, Position, and What is the other one for? It is a long handle lever just behind the Draft...

Not to start a big arguement here, but I'd like to know why the Mahindra section is under "Other Brands" on this site? Is it not true that Mahindra is the 3rd largest manufacturer of tractors in the world? That being said, shouldn't it be on up there on this board with Deere and New Holland...

I heard that Mahindra was coming out with a different seat for some of their tractors. Have not seen one yet. My replacement seat looked just like my original one. I inquired about a seat cover, but there does not seem to be one available for the 10 series. Thought a cover would be good to...

I have had my Mahindra 4110 for 2 weeks now, and I am somewhat dissapointed in a few things. One thing that I have learned the HARD way. Check out the exact tractor that you will get BEFORE taking delivery. Check it out thoroughly. I did not, and now I am paying for it. I test drove a 4110...

I am about to buy a new Mahindra 4110 with a loader. Does anyone have a recommendation for the tires I should choose? It makes no difference to the price of the Mahindra if you go with R4 or R1 tires. I live in Texas. No snow here. Tractor would be used for around the farm use only. No lawn work...

I am about to buy a new Mahindra 4110 with a loader. Does anyone have a recommendation for the tires I should choose? It makes no difference to the price of the Mahindra if you go with R4 or R1 tires. I live in Texas. No snow here. Tractor would be used for around the farm use only. No lawn...