Search results

Results 1 to 35 of 35
  1. R

    Hydraulic question

    I am working on installing an old meyers 6 ' snow plow on a 1989 Ford 1320 tractor with FEL. I had the same plow mounted on my 2001 New Holland TC-35 for years. I bolted the old truck plow frame inside the bucket and disconnected the hydraulic lines for the curl function on the bucket and ran...
  2. R

    Caroni Flail Mower Replacement Blades

    I replaced all the knives, clevis's, and bolts on my Caroni flail mower with a set from Flailmaster. I had just gotten the mower back together after replacing the badly damaged original roller and bearings. The second time I used it after the repair I broke a clevis and lost a set of blades. I...
  3. R

    Caroni Flail Mower Roller is a POS

    I bought a Caroni TM 1900 flail mower last season from Agri Supply. It cuts great and I have used it to cut about 30 acres of rough pasture last season. However I think I dented the roller the very first time I used it. Well it has become so dented that it is now bent like a banana. We used to...
  4. R

    TC 35 starving for fuel

    I have a 2001 TC- 35 with around 1800 hrs. I was flail mowing a section of our front pasture that is rather hilly when the tractor began to bog down occasionally. At first I thought it was just extra thick grass that was the cause. But I noticed that the fuel bowl was not filled all the way. I...
  5. R

    Ford Dearborn Disc Harrow

    I am going to look at a 6.5' Ford Dearborn disc harrow that's for sale on craigslist for $800. The seller says that it is in good condition. It has notched discs in the front and smooth on the rear. If it is in fact in good condition does the asking price sound about right for this harrow? Is...
  6. R

    Welding / repairing tiller gear case

    I have a honda frc800 walk behind tiller with a leaking gear case.. The case has a couple of welds that are cracked and leaking oil. Is it possible to repair the welds without splitting the case. My thought was to drain the oil and attempt to weld it from the outside. I have never tried to weld...
  7. R

    Honda FRC 800 Parts / Opinions

    I just bought a used honda frc800 tiller for $900. It looks to be in decent condition and starts right up and runs good. It has seen some use and the tines are ready to be replaced. It also has a small oil leak from the tine housing as well. I plan to go through the machine and change all the...
  8. R

    Rabbit Turtle Button on HST not Working

    I have a NH tc-35 hydro with 16 LA loader. The range selector button (turtle / rabbit on loader control ) no longer works. It is in high range all the time. It would shift down at first when I pushed the turtle button but would not stay in turtle when the button was released. Now it will not go...
  9. R

    Rabbit Turtle Button on HST not Working

    I have a NH tc-35 hydro with 16 LA loader. The range selector button (turtle / rabbit on loader control ) no longer works. It is in high range all the time. It would shift down at first when I pushed the turtle button but would not stay in turtle when the button was released. Now it will not go...
  10. R

    Tiller Mounted Hiller

    I have a 6' wide 3pt tiller that i run on a New Holland TC-35. Would it be possible to mount somthing on the back of the tiller to make some 3' wide raised beds in one pass. I would like to be able to take the the freshly tilled soil and move it in about 18" on each side to give me a 3' bed. I...
  11. R

    TC-35 Hydro Pedal Creep

    I have a hydro TC-35 with approx. 1300 hrs. I was turning some compost with the FEL when I noticed that the forward hydro foot pedal was creeping down slightly. It would move just enough to slightly engage the hydro drive so that the tractor would creep forward even without touching the pedal...
  12. R

    Three foot wide beds six foot bucket

    I have a New Holland TC 35 tractor with a six foot wide front end loader. I am a certified organic grower that needs to spread approx. 20- 30 yards of compost per season. The space between the rear wheels is approx. three feet (that will be the width of my beds) The wheels tracks will be my...
  13. R

    snow plow hydraulics from Backhoe

    I have a New Holland TC 35 with FEL and woods backhoe. I want to mount a Meyers 6.5' snowplow to the FEL. I have already figured out the mount for the plow to the bucket. The question I have is if it would make any sense to tap into the hydraulics used for the backhoe. When using the snowplow I...
  14. R

    Automated chicken coop door

    I am looking for ideas on fabricating somthing to automatically open and close the door to my chicken coop. My current chicken door is hinged at the bottom and is approx. 12"x 16". It has a small barrel bolt at the top. I am trying to make it so that the door can be setup on a timer to open up...
  15. R

    Selling Cub 7275

    I have a Cub 7275 with FEL and 3pt hitch 6.5' backhoe that I have owned for sveral years. Just put about $1200 into front steering knuckle repairs( bearings, gears, seals etc.) Tractor has approx.2400 hrs. it has some wear on the bucket and backhoe pins but everything works. It has been used...
  16. R

    N H TC35

    I am looking at upgrading my tractor from a cub cadet 7275 (27 hp. approx 2400hrs)with FEL and 6.5' 3 pt. backhoe to a New Holland TC 35. (35 hp.) The tractor has approx. 1300 hrs, a NH FEL, and Woods frame mount 7.5' backhoe. It is 4wd. and hydro trans. I was able to test drive it, everything...
  17. R

    7275 Front axle problem

    I have a cub 7275 with a loader, 3pt. backhoe, brush cutter, and york rake. I have owned it for approx. 6 years. I was using it this weekend to move the chicken coop . I noticed that the right front wheel appeared to be loose. I checked the wheel bolts but they were tight. The axle itself is...
  18. R

    Metal building project

    I have been working on a 30'x44' metal quonset hut style building for about 13 months or so. It has been a long and expensive project. The building is up, I have the power and water hooked up and I am close to getting the heat hooked up. Right now I am in the process of applying spray foam...
  19. R

    Sad Story

    We had a terrible accident in central CT recently. A 16 year old boy was driving a tractor with a trailer attached. His younger brother was standing on the hitch area of the trailer. He was attempting to drive out onto a public road when traffic caused him to stop and back up. His younger...
  20. R

    Smoking & Hard Starting

    I have a Cub Cadet 7275. The tractor belches blue smoke when running. It is also hard to start when warmed up. When I start the machine when cold after heating it up with the glow plugs for a good long time it starts right up. After it has been running and up to temp. it does not want to start...
  21. R

    Tractor Smoking

    I have a Cub Cadet 7275 it runs fine has plenty of power and does not use any oil between oil changes. The problem I have is the tractor smokes more than any other deisel tractor that i have owned. It is made worse I think by having the exhaust pipe located below the engine compartment instead...
  22. R

    US Steel Building Comments

    I have someone local that is selling a US Steel Building 30x36x14 S model. It is a steel quonset type building. He purchased it new about 3 years ago and the town he is in will not let him erect it. He is selling it for $3500. It seems like a great deal. The unit does not include the endwalls. I...
  23. R

    7275 Problem Starting

    I have a Cub 7275 that has an intermittent starting problem. When I turn the key to engage the starter it will sometimes just click once and not turn over. If keep turning the key from the off position to the starting position several times it will start. I have checked the terminals on the...
  24. R

    Seal replacement Cub 7275

    I need to replace the two oil seal's on my 7275. The front axle differential seal (where front drive shaft connects to front axle ) and the mid mount pto seal are both leaking pretty good. I have been using the machine almost daily for the last few weeks. But will have a break in the action...
  25. R

    Hiding septic tank cover

    I recentley purchased a new home. The previos owners had a new septic tank installed and left the mess for me to cleanup and seed. I did not bother doing repairs last year figured I would wait till the ground had a chance to settle. Well this spring I found that the ground had settled nicely...
  26. R

    Miracle Truss Buildings

    I am looking at building a 24'x34'x14' garage / barn. Looked at the miracle truss system. It looks like a great way to go. Anyone have any experiance using this system. I am planning on building the structure on concrete piers and pouring the floor later.
  27. R

    Free or Not

    I was recently approached by an aquaintence who was looking to get some work done at his house. He had a new well installed and the contractor left a big mess. I would need to bring the tractor with FEL and 7' rock rake. He is looking to get the debris removed from his front lawn and dumped in...
  28. R

    Rotary Cutter  Rotary cutter blade balance

    Any ideas on the best way to balance a set blades for a rotary cutter. I am familiar with balancing blades with a center bolt but it is not as straight forward with a free swinging brush cutter blade.
  29. R

    No good deed goes unpunished

    I helped a friend in need this weekend and paid the price. My buddy cross town hurt his back and was unable to do much around the house. I offered to help him out with my machine. I loaded the tractor with rotary cutter onto the trailer. Drove cross town 8 miles or so . He had some brush and...
  30. R

    Rotary Cutter  Rotary cutter question

    I have a howse 5' medium duty cutter with a slip clutch. It seems that the blade tends to slip to easily when cutting heavy brush (clumps 3/4" to 1"). Is this normal? How easily should the clutch slip? Is there an adjustment on the slip clutch and if so how do you adjust it. I did not recieve an...
  31. R

    Howes rough cut mower?

    Any thoughts on the reliability/ performance of the Howes rough cut mowers. The unit I am looking at is a 5' med. duty with slip clutch. To be used on a 27 hp cub 7275 for some initial rough cutting of brush, vines etc. and then for biannual mowing of the field after that.
  32. R

    Hydro Drive Question

    I have a question regarding the hydro drive on my cub 7275. I was working the tractor skidding some trees i had cut down. The tractor would be pulling pretty hard in reverse with a fairly large tree chained to the bucket. At some point with the tractor in mid range 4wd if i encountered...
  33. R

    cub 417 loader question

    I have a cub 7275 with 417 loader. I cannot get the bucket to float. When I push the joystick all the way forward it just raises the tractor front wheels off the ground. In the service manual it states that the control has a float lockout. I cannot for the life of me find it. Still looking
  34. R

    No float FEL

    Have cub 7275 with stock loader. The float function on the joy stick will not work. Pushing the stick all the way forward is supossed to be float position. However all it will do is continue to lower bucket till it is maxed out. Any suggestions?
  35. R

    Repair for cub 7275

    I have recently purchased a Cub 7275 with a FEL . I have added a 3 point hitch backhoe from my last tractor ( mits 210d) I am having trouble getting grease into the fittings on the FEL any ideas? Also getting ready to sell the Mits tractor. I purchased the tractor with the hoe on it ( never used...
Top