Search results

I have a 520H with a 2 stage blower I bought used, model #79361 I have some questions about the idler pulleys. Does anyone have the diameters of the flt and V idlers? Mine look to have been replaced, and Im not certain they are correct, or the belt. Is the belt 5/8" x 68"? The little "L"...

I noticed the deck on my 520H seems to tult down quite a bit in the front. How do I go about leveling it? There isnt anything in my owners manual about doing it. Its a 1989 520H with a 48" side discharge deck. There is a linkage rod on the rear of the deck with a nut on it that looks like it is...

Where can I get a parts drawing for a 1989 520H wheel horse mower? I need the idler pulley that is for the hydrostat drive, the belt that goes from the motor to the transaxle or whatever its called? The idler pulley crapped the bed this weekend and I cant find any locally. Its about 3 1/4" in...

I have an older 520H with a side discharge 48" deck and I need to rebuild it. Is there a place online to get parts or do I have to go to the dealer? The spindle housings are shot, but the bearings are tight. Thanks

I have a 520H and think the ignition module is bad after testing according to the manual. How tough is it to replace? I have a puller for the flywheel, does the flywheel shroud have to come off or will the flywheel fit through the opening? It looks close, but appears the ring gear may not fit...

How do you get the tank screen out of the gas tank? The petcock just swivels around doesn't unscrew? Thanks guys

I have a 520H with an Onan engine and had thought the fuel pump was bad earlier in the seasnon, now the engine surges unless you use 1/2 choke, i checked the gov adj like the book says and it was fine, dirty carb? Thanks

I have a 520H (1988 i think) that wont start after last season, it doesnt appear to be pumping fuel into the filter, am i to assume the fuel pump is bad? It cranks, has spark, fresh fuel, but just wont start. Never had this problem before, Ive owned it about 10 years, just want to make sure...

Does anyone have any info, or know where i can get info on a Lambert model HS-68P-1 snowblower? looks like its from the early 70`s, Tecumseh model H60-75316H engine, its all complete with the exception of the spark plug wire which appears to have been cut, just wondering if any info is out...