Search results

Results 1 to 8 of 8
  1. T

    Kubota tractor price

    I have what I believe is a 1981 kubota M4000 48 horse power, no loader, has canopy, right at 1500 original hours all lights and gauges work everything is good on it can anybody tell me what this tractor is worth?
  2. T

    Kubota hydralic problems

    The 3 point lift on my kubota m4000 tractor is having some problems it will raise and lower but when you raise it all the way up it hits the top and drifts back down a little. then when you shut the tractor off the lift sinks back down slowly.
  3. T

    loader for a kubota

    I'm thinking of buying a loader for my kubota m4000 i think i can get a used one pretty cheap i just need to know where i can get the mounting brackets for the tractor and how hard they are to put on
  4. T

    f525 lives again

    For those of you who posted on my thread about the john deere f525 dying for no reason i got the problem fixed the fuel shut off valve had some gunk clogged up in it and was serving as plug to shut off the fuel. I would have never found the problem if i hadn't of broken the fuel line off in the...
  5. T

    john deere f525 dies

    I have a john deere f525 ztr mower it has a kawasaki motor that has always run great but lately has had some problems it starts right up and runs fine but after about 5 minutes of mowing it just dies all of a sudden you can sometimes get it started by choking it again but it just dies again...
  6. T

    husqvarna mower

    I have a husqvarna yth2148 mower that isn't running right when you start it it sounds weak even at full throttle but gains some power after running a few minutes. when you start the blades it almost dies and is so bogged down it sounds like it is running with the throttle all the way down when...
  7. T

    jd baler miss tying

    My john deere 24ws wire tie baler is miss tying more than one should i know they miss ties every once in a while but it's missing more than it should is there anything i can do to fix this?
  8. T

    jd 24ws baler not putting wires tight enough

    I'm having a problem with my john deere 24ws wire tie square baler it ties the bales but the wires are to loose and the bale isn't packed very tight and the bales don't look good i've adjusted the springs on the back of the bale chamber and it didn't do any good does anybody have any advice
Top