Search results

I got my cylinder head back i am starting to reassemble but when I went to put the water neck housing on the cylinder head I found one of the Four bolts is a threaded stud. The picture I took when removing it is at a bad angle and doesn稚 show which hole gets the stud If anyone has a pic of...

Unfortunately I am in the middle of a repair due to a cracked cyl head. I got my new parts and started to install the valve cover gasket and it seems to be to long. Since this is a one piece rubber gasket, you have to seat it into a grove with hammer because of the tight fit. I got down to the...

I have a mid 80's B-6200 hst, power steering and loader. while I was checking my oil, I noticed the oil was farther up on the dipstick than it should be. I had recently added hydro fluid because I noticed I was having to push farther down on the hydro pedal to move faster. I drained the engine...

I want to change the UTF and Hydro filter on my tractor but the owners manual did not come with it. Can anyone tell me if there are any other drain points beside the ones on either side of the Differential.

I currently own a B7200E 2wd with a front mounted pto which drives a RC60-72 belly mower. It is a great mowing machine. I have found a B6200 4x4 with power steering,loader and a 4' bushhog. The 6200 has a mid mount pto. Can anyone tell me if it is possible to turn the gearbox 180 deg and have...

Does anyone out there know what the correct torque and torque sequence of a cylinder head for a Kubota B7200E with the D950 engine ? Also, if you know the torque value for the injectors that would also be appreciated.

I have a 1986 Kubota B7200E with the D950LA 17hp engine. It was bought last year with 740 hrs on it. When I initially looked at the tractor, I started it up and a very small amount of White/Black smoke was noticed but I checked all the obvious areas you would check for oil in the water or water...