Search results

I have a BX25D and have been working hard on installing a Land Pride 380-137A third function kit with no success installing as Land Pride intends. They specify the P port on the valve block be installed on the P (pump) port line. The trouble is that I've tried everything to undo the line under...

Which one of you drive this car? I saw it parked around the corner from my workplace on the way in this morning.

Here's one from just around the block from work on my way this morning. The kids are getting pretty wild these days about putting spoilers on their cars. :laughing:

When my parents built their house they had some problems with the sewer early on. To get a snake into the pipe a guy dug down to the line and drilled (or otherwise created a hole) in the line. Then added clay tiles to get the cleanout back to ground level prior to adding the dirt back to the...

The steering might be a little light so hope he isn't taking any quick turns. From the "Twisted Truckers" Facebook group: P.S. There's plenty more fun pics where that came from.

Got this one tonight about 30 miles from home. Pulled into a Casey's for gas and a coffee. The front of the truck looked like it rear-ended something and the car, too. The truck had one lug and lugnut missing on the rear driver's side wheel. The truck pulling the car didn't have license...

When I'm traveling around for work I see names of towns that I think are interesting, odd, or othewise stick out in my mind. Lately, for a project I've been going back and forth on I-70 in Missouri and there is an exit for Auxvasse. I've never been to Auxvasse or met anyone from there so I had...

Here's a couple of gems that I came across while looking for something else. I think he has the hauling capacity maxed out on this Ford. An innovative "boom truck" or the beginning of a "How many Mexicans does it take to change a lightbulb?" joke:

How about forks for donating an old TV to the local thrift store? It's a 34" flat screen and probably weighs 200#. I made a second trip and took the TV stand with a few extra things thrown inside.

I've been wanting to get an aerator to run on my BX25D. I never see any 3PH core aerators available in my area on CL. I see the 48" - 50" pull behind aerators for sale, though. I wondered if getting one of those and turning it in to a mounted one would be worth the hassle. The reason I'd...

Better late than never on the pictures, I guess. I'll be using this lift to hopefully move (safely and successfully) a 1000lb gun safe within the next month.

I found a RC near me that seems to be reasonably priced, but I can't find any information on the brand anywhere online. Does anyone know anything about "Trailblazer" cutters? The cutter in question: Trailblazer Bush Hog Mower

I was looking for another way to hook up my battery tender to my BX. Previously, I had to remove the battery cover and plug the battery tender cord into the cable attached to the tractor. Adding an external port (bulkhead) it saves a few minutes of hassle. This is a pretty easy mod to do on...

The factory filters on my BX are gray that matches the frame, but the replacement Kubota filters are white with the blue print on them. Does anyone know what the reason is for this?

Looking for a used 4' to 5' PTO-driven tiller. I'm located in northeast Kansas and can drive for the right deal. Max distance from Sabetha, KS 120 miles please. If unsure, post anyways. I'll let you know if it's too far.

What if what we perceive as pallets are actually just a shapeshifting lifeform that just wanted free tractor/forklift rides, but were not sure how to ask?

Here's the post after receiving my new BX optional toolbox. I purchased from Messicks. To order you have to call and order. You won't find it on their website or any other. The price of the box is $65 plus shipping. If you're within their 100 mile halo I believe you can have it direct...

I meant to make a thread about this a while ago, but Alco is going out of business. All of the stores are supposed to be liquidated. The reason why I'm posting this is because the fixtures are also being sold. I think some of you out there might be interested in buying some of that kind of...

Not all culverts have a screw pattern, but I've seen some that do. Example:

Here's a picture of my monster. Put about 4 hours on it this winter doing snow. The BXpanded PTB is nice for getting through ice down to pavement. I run the loader in float and feather the bucket curl as it needs adjusted so I don't pull up too much gravel. Anything that I scoop I try to...

I have a wierd problem with my starter on a 2004 Chevy 1/2 ton 5.3L which has happened before. (Last winter sometime) I was parked at my parents' house and went to start and leave. I tried to start several times, but all it would do is blank the lights until I let off the key. I thought maybe...

I looked at a bunch of old threads on here about toolboxes for tractors, but haven't noticed any of the optional BX toolbox kits. I even had a hard time turning any pictures up on the internet of people that have them. So I'm wondering does anyone have one? How big is it? A diagram of what...

I have a hard time getting pictures to load when I use the app to view the forum. Usually I can get about half of the pictures to load. Anyone else have problems with the app?

98 posts and no one has posted: P.S. I got the picture from a blog post called "jeep drivers are douchebags" which seems fitting.

I finally got my PTB put on. Just out of the package. Notice the missing cutouts for quick-on forks. I requested no cutouts since I don't plan to add forks to the bucket. Testing the initial fit on the bucket. I tapped the bar with a 4 lb hammer (2x4 between them to keep metal from...

Does anyone out there have any experience using a BX25D or similar with a 5' rotary cutter? I'm primarily interested in mowing tall grass along fence lines. The 5' width appeals to me so I can be farther away from the fence and so I know for sure I'd be done in two passes. Looking at the...

I took a few pictures when I did my project yesterday, but they mostly only showed before and after so I could see how good of a job I did and where I want to do some more work. Here's one picture of the tractor with the blade. The tractor is a JD 2440 with JD 146 loader. A 7' blade would...

Here is the final product. I was a little nervous putting in the middle ripper. As you can see it barely clears. The rippers were in the back of my truck when this blade was getting rebuilt so its just an accident that the ripper fits. I thought they were going to put the tube in closer to...

I just bought a box blade off of good old Craigslist. It's a 5ft King Kutter (standard duty). The owner said he used it about 4 times. He was blading and caught a root. He admitted that he had it on too big of a tractor. As you can see it is a fixer-upper. The damage: 1) Flat iron bent on...

I'm trying to gauge what model this tractor might be from knowing which loader it has on it. It's not the most efficient method, but the seller is kind of :confused2: combined with lazy when it comes to selling this tractor which makes me :smiley_aafz:. I haven't went to look at it yet, but I...

Seller cancelled the transaction. If someone else out there is interested in this tractor I guess they know where to look and how much they can expect to pay. On to the next deal!

eBay auction I bid on and was the high bidder on a tractor listed as a Kubota L3010 DHST. It's hard to make out, but I think the fender says GST. The auction says that it is a hydrostat transmission that should make it a HST. I can't find a DHST model listed on the Tractordata site. The...

I have a JD 2440 with a problem. Diesel is leaking into the engine oil somehow. So far I have replaced the lift pump and that did not fix the problem. What other things should I be looking for to fix this problem? Any help is appreciated and thanks in advance.

Could someone give me some ideas to attach a JD 600/700 series bucket to a JD 146 loader? I think either need to cut/weld/modify brackets on the bucket to fit the attachment on the loader or somehow add a quick attach bracket to the loader to fit the bucket. Any recommendations would be...

Can anyone tell me how much oil should be in a 2440? I don't have an operator's manual (yet) and I can't find anywhere that will tell me how much oil to put in. Thanks in advance.