Search results

I was looking for some time if there was a company who made a brush Guard for my GR2120 and did not find but only One and that was Steve From Heritage Machine Works Inc 3268-320th St. Wellman,Iowa 52356 319-646-5169 Heritage Machine Works The unit bolts up to the front bottom frame plate and...

I recently bought a new GR2120 and wanted to check the Rpm at Idle and full Throttle so I willl explain how to do it. I,Am a 2 cycle 4 cycle repair tech and a few years ago i bought a Laser photo tachometer from Amazon to check the Rpm,s on flywheels and shafts using this unit and reflective...

No its has not got differential lock and it is AWD and one of the best things is the Glide steer ,almost like a zero turns . Here are some pictures of support bracket I made for the left fender. Also there is a site on the internet that sells a grille brush guard and I had called about it and he...

I checked the Rpm on this new gr2120 and at idle is 1700 Rpm and at full throttle is 3490 Rpm.Also they may have made the 2013 tractor fender a little more thicker in there metal. It seems that on all newer lawn tractors the engine technology (efi) and transmissions and cutting process has...

The GR2120 diesel is new as last week .With tax NY state , I paid $10109.00 . I have had two Kubota tractors before a BX2200 and now a 2011 BX 2660 which both were bought new. I just recently had a zero turn 1998 Grasshopper with the Kubota 21 Hp diesel engine in this with a 60 inch deck. This...

After cutting the grass a few weeks ago with my 1997 legacy I had noticed the plastic cup holder was real loose and I could pull it out a little from the frame.Looking underneath the fender I noticed all but 1 of the 5 plastic mounting screw posts were broken Part # 1715913 (cup holder) so I...

I have a 1997 legacy with a Kohler 25hp engine and a 60 inch deck with tilt steering and about 1450 hours and have a lot of play in the steering wheel.There is about a total of 2 inches of a dead band in the wheel before it starts to move the steering piston.The wheel itself is not loose. I...

I just received the Heavy Hitch and Installed the John deere painted orange suitcase weights on my BX2660 .

My son and myself just returned from Barlows farm equipment in Kentucky.Traveled from Buffalo,NY around 600Mi each way and it took around 12 hours each way and Spend around $480.00 in fuel.My son traded his L3400 1yr old about 100 hours for a L5030 with about 950 hours.I bought a new BX2660 with...

I have a BX2200 with the loader ,60 inch deck and snow blade BX 2763 since new in 2001 with 418 hrs and it has been a wonderful little tractor and never been in the shop for repair.I'am considering looking at a new BX 2660 with the front loader ,and deck but I'am not sure if it would be much of...

I have a 1997 Legacy with a 60 inch deck.I have the operation manual and I'am confused about the blade height adjustments. The manual says to adjust the blades about 1/8 to 1/4 inch higher in the front than in the rear of the blade.If I try doing this with the large nuts on the 2 long adjusting...