Search results

Been away from the net for quite a while. Have BX 24 with belly mower 60 inch. Bolts came loose on pulley and destroyed the pulley and bearing seal on spindle. Have acquired new parts, cleaned bearings and bearing race, repacked with grease and seal is in place. I am ready to replace parts...

Still kind of new to the forum and equipment and all. I notice now after doing some digging with my FEL that there is some 'slop' in the bucket. That is to say it rocks back and forth as though it has more play in the swivel pin areas. I know this is not entirely normal but I am thinking a...

I just finished digging out a small tree stump with my backhoe. Shut down the tractor briefly and when I came back and started it up... nothing. I mean NOTHING. Checked the hydraulic fluid and it was low. Added about one guart and it brought it right up. Only about 190 hours on this...

Never had any problem before but now all of a sudden when I go to hook back up to the FEL, connecting one of the Hydraulic lines has become difficult. The sliding knurled sleeve on the quik connect link will not close down all the way and will not 'lock on' securely. It takes me a long time of...

Cracked the Right Rear Tailight lens on my BX 24 2008 and need a part number for it. I have been to Messick's site and that is about as confusing as it can get for me. I have Googled it I have used this TBN's search engine also so I have just about given up and ready to go to the Orange Dealer...

I feel kind of embarassed :o but here goes; I know how to raise and lower the MMM and the 3 pt Hitch with attachments... BUT... How do I lock the 3 pt hitch out so that I can lower the MMM to cut grass? Currently I have a very heavy log splitter attached to the 3 pt hitch. This log splitter...

I only have 125 hours on this 2008 BX 24, MMM, FEL, BH. So, it is like brand new almost (except for the mud! :D). I now have a leak in my steering cylinder. Hyd fluid leaks out pretty good where the piston rod enters the cylinder when it is being used under pressure. I am assuming the seals...

Hello; This is my first post and I hope somebody can help me. I live in Western PA. I have an older model B8200 Kubota. I lost my gear box on the belly mower and the dealers around here are asking WAY too much. The Model number on the deck is RC B60 - 1. I need the whole gear box assembly if...