Thanks for the info. I don't have the tools for knurling so I'm thinking of tapping and install a set screw. I'll either fix it or break it all together.
I have pressed it back in and put Loctite on the guide, but I don't feel fuss warm about that. I could take it to a machine shop, but they would probably charge almost as much as a new head. I saw online a guy that said he welded his in I'm not that good of a welder that I would attempt that...
No, my Eng doesn't have an oil cooler. Mine is in a Husqvarna lawn Tractor 24hp. Trying to find a way to repair a valve guide that has moved. I was thinking of trying Loctite
The valve guide has moved and there is no indication that there ever was a valve seal on that valve. On the parts supplier web sites I don't see a listing for the valve guides for my engine. Do you know if this guide is replaceable.
I guess my next step is to check the valves but what is so confusing is this happened suddenly overnight. Thats why I though it was fuel or electrical related
Thanks for your reply. This Eng is driving me crazy. I have spark on both ignition coils but on a 20k scale I get a reading of 4.90 going from the sparkplug wire and the ground terminal. I don't think I should have a reading. The coils might be the problem because the lawn tractor was working...
I have a 445677 0476 E1 Briggs Eng on a Husqvarna lawn tractor. Ran fine shut it down and the next day when I tried to start it it backfires through the carburetor. I checked the coils for spark, checked flywheel key all ok. I took carburetor apart and cleaned it. Still backfires. My next...
I have a Allmand TLB 325 and like my unit a lot. The only negative thing I have is parts are hard to get. The parts supplier that took over for Allmand when they discontinued manufacturing these units is only suppling limited parts. Right now I'm having a problem with the hydraulic steering...
Does anyone out there own an Allmand? I'm having a problem moving tractor after it warms up. When I move the pedal to go forward the tractor want's to die.
Does anyone know if there are orings or a gasket behind the sight glass on an Allmand. I would like to be prepared before I drain my system down. Also who manufactures the sight glass.
Hi Everyone,
I have a LOGTH 2448T Husquarna lawn tractor that I would like to attach a disc or harrow to till some land. Can anyone tell me can I pull a disc with this tractor and what size disc should I uise,
Has anyone built an attachment for their backhoe to pull a drag/cultivator or trailer. I know you can weld a receiver to the top of your loader bucket to position a trailer, but I would like to be able to toe behind my backhoe.
Hi,
Anyone Know if the manual Steering box for a Terramite T5B was manufatured strickly for Terramite or was this used on another type of equipment? Also where can you get parts for this steering. Box was manufatured by Ross.
Thank you