Search results

I have fairly new Kubota B2920 with the Z bar rear tires which are very good in snow as have good 1" or better bar tread look at profile pic of tractor for reference. The fronts are more of a standard turf tire and would like to get a more aggressive tire up front to help with steering and more...

I know this has been discussed but want to input my thoughts. New B2930 with 60" mmm adjustments to get level was little bit of work and all links rear and front not at same adjustments - That tells me either tractor links or mmm is not square from factory. Rear link to 2 point arm is a joke...

I have new B2920 with 60" mmm. Just putting on tractor to mow this week and cannot get it level. Now manual says to have front link pivot pins on turnbuckles to front pivot arm at 19.9", Lower link arms set to .7" of threads showing on top and rear connector link to 2 point arm set to 26.2" with...

B2920 with bar turfs on rear. Using around the yard moving things, dragging and sweeping up dead debris noticed the bar turfs would slip once in awhile with loader on. Take in mind loader will be off for mowing. My question is filling the rears with fluid will stop this problem and help with...

I used my new B2920 with quick hitch moving trailers, boats and putting snowblower away in back of shed. Did quite a bit with 3 point and either mine is setup perfectly or that is how they work. It was smooth as silk and cannot tell the difference from my old NH TZ25DA that had position control...

I was looking at adding a cat 1 quick hitch. I have looked at Northern tool and Iowa farm. Now I imagine the 100 - 120.00 units are China product whereas the 250.00 units are USA made. Any one out there have either and could give me insite on pros/cons of which one you are using

I know when the mmm is attached that you can pin it in the up position with bracket on mmm when using the 3 point to keep it up. My question is when mmm is off the brackets are still there and rise and lower with 3 point, Would a guy just need to remove the link and secure them up with tie strap...

I have been googling for a softcab and seems that they are about 1500 - 1600.00 but seem to be designed well. Does anyone know of another softcab that would be little less money but still good quality?

I have the new B2920 about 4 hours on from blowing snow last week to clean up Blizzard. Question is low sulfur hwy fuel. I live in midwest and can buy ag fuel no problem vs hwy diesel which is cheaper. Is ag diesel better on engine as is higher sulfur or should I use the Hwy diesel and possibily...

OK have my new B29020 and kept the 55w flood off old tractor to put on this one. Is there wires in rear that run off light switch that I can just plug into and where are they located?

Finally dropped off New Holland TZ25da, said my good byes and loaded up new B2920. Dealer came through big time. On agreed price for standard B2920, FEL, 60" MMM and standard turfs came away with bonus bar turfs, grill guard, rear hydrolics & block heater. Need to wash off this weekend and put...

the B2920 came in with the 31" bar turfs on rear and different style 22" type turf up front. Dealer offered to put standard turfs on but after looking hesitantly over agreed to leave them on. I will be using it on grass/dirt and snow so covering type of use. Any one out there have these and give...

Any one here that have these on their B series tractor. I am curious how they have performed on grass, in dirt and also for snow removal?

:confused:I orderd new B2920 requested standard turfs and ended up coming with the bar turfs. Now my question standard turfs/r4'S are 23" front and 33" rear wheras bar turfs are 22" front and 31" back. Does anyone know if Kubota at the factory changes the front/rear gear ratio for the smaller...

Sounds like B2930 coming this week with 364fel, 60" mmm on turfs. Swapping out New Holland TZ25da SC on it. cat 1 51" metorite snowblower, 52" woods tiller and 60" woods rear blade should fit better. . Any tips or things to know about using this tractor? Never put any seat time on Kubota maybe I...

B2920 adding 1 good flood light on rear for blowing snow in the dark with 3 pt blower. I have had a 55w halogen light on current New Holland TZ25DA worked OK and could take off and put on B2920 but heard about the LED floods. Are they brighter and if so what wattage should I go with one larger...

Ordered B2920 should be here in month. One question I have is is there a reasonable/economical cab for this unit for winter work just to keep the cold wind and snow off me. I would want to take on and off easily so not a hard permanent cab.

I had opportunity to purchase a 2011 Kubota B2920 which dealer stated was new for a certain price but had 24 hours on it but quoted me new price for it. I requested a new one with 0 hours and they have to go back and check what the 2012's if there is a price increase as that was the only one in...

Decided on Turf for my Kubota B2920 now they offer two sizes to make more decisions on like I said 60% mowing 40% blowing/pushing snow, loader work and garden tilling Kubota offers FRONT - 22.0 x 8.5-12 /REAR - 31 x 15.5-15 FRONT - 23.0 x 8.5-12 /REAR - 33.0 x 12.5-15. My initial thought is get...

Decided on Turf for my Kubota B2920 now they offer two sizes to make more decisions on like I said 60% mowing 40% blowing/pushing snow, loader work and garden tilling Kubota offers FRONT - 22.0 x 8.5-12 /REAR - 31 x 15.5-15 FRONT - 23.0 x 8.5-12 /REAR - 33.0 x 12.5-15. My initial thought is get...

I looking at a Kubota B2920 that comes standard with R4's to get turf tires cost is approx 200.00 more. 60% will be used to mow 3 acrea country yard with remaining 40% for snow blowing long driveway, misc loader work and a few gardens tilled in spring. Concerned if the R4's on this unit would be...

I was coming across "thumb controls". Is this a hand operated lever or switch option of somesort to run the hydro as option vs the foot pedals which where located on the B2920 eliminates the use of the left/right brakes to assist in steering. I would also love that if available for moving yard...

I am planning/leaning toward a B2920 but would like to question the 1/4" positioning. I have a metorite 51" 3 pt snowblower, woods 52" tiller and woods 5' scraper blade which is why I am leaning toward the b2920 for the 49" width. b3200 is 54" wide main reason but little bigger and more hp...

I have opportunity to trade the New Holland TZ25DA wit 60" mmm, 48" quicktach loader on either a B2920 or B3200. Last winter blowing snow told wife could use another 5 hp under the hood. Have already a Metorite 51" snowblower, woods 52" tiller, woods 60" blade, 25 gal trailer sprayer and John...