Search results

I have a 2010 Kubota RTV 1100 and it is making a loud humming noise and the front end is jerking back and fourth while I drive it. I just changed the UDT fluid in the front transfer case. I jacked it up with all 4 tires off the ground and tried it out in 4wd. The front passenger tire seemed to...

Alright I finally have an update. I went and bought those rims that you have Kevin, except I went with a 15x8 ( http://www.summitracing.com/parts/SUM-85-5865/ ) with a 3.75 inch backspacing giving me a little wider footprint. I went with a Falken ZIEX ZE-912 215/60/R15 tire. I have to say it...

Alright finally took a picture of the camber. It looks like it's setting pretty level right now, not sure if it is from the 100 degree heat or what but you can still see the wear on the tires. That wear is from about 2 months of driving on 100% pavement everyday. I may drive 5 miles a day back...

I've been having problems with the camber on my RTV 1100. I have the HD struts on the front (plan on buying the standard struts in the near future) and the factory rims and atv tires. Did some measuring and the bolt pattern is a 5 on 4 1/4" (metric is 108.49mm) with just under a 3 1/8" center...

Well since this is a wire question page can anyone tell me what the red/yellow wire with female connector and the black wire with the male connector are for in the fuse box on the rtv 1100? Also what would be a good way to disable an RTV 1100? I had some guys at work move my bota across the...

I have a Kubota RTV 1100 bought it used in Missouri and had it brought to me here in Montana. When it got here i noticed it had a really bad camber issue on the front caused by the 2 inch lift kit that was already on it. I didn't pay much attention to it at first till about a month or so later...