Search results

seems the tie rod on the left side of my 4510 may be worn out. I cant seem to get the castle nut off to replace. There is no way to hold the tie rod end while trying to loosen the nut. Previous ones ive done have had a hex key on the end of the threaded portion but these do not. Any tricks...

I cant seem to find the trailer Im looking for. Id like a 5x10 with a load rating of 6-7000 lbs. The only ones I found in that load size are dump trailers which are out of my price range. The ones that are 5x10 are only good for 2000lbs. I got a quote for some C5x9 steel from my local...

I picked up a Hyundai 130lc-3 that may need some undercarriage work. Seems that the shoes are in great shape very little wear. However, the sprockets are near the end of their life and the chain spacers dont look too good either. Chains themselves look ok. Can the spacers be changed without...

Im looking to buy a used excavator to finish some yard work. I had my 50 acres selectivly cut (pine and hemlock) last year and Id like to pull the stumps and clean up the slash. One area will be turned into a field, one area cleaned up for apple trees and the major project of building my MX...

Anyone know if there is a replacement part number to the power beyond kit (LVB25098) for the xx10 series tractors? Id like to add a backhoe (probably 48 series) to my tractor. JDparts shows that the kit is no longer available.

Finally gonna break down and get a lawn mower. While searching for older style (300, 400) JD tractors, I came across a 2006 27 hp Bad Bow zero turn. Its got a 60" deck with a bagger and its within my budget ($3500). Its got 500 hours on it. The Deeres I was looking at were all tractor type...

Finally got my electrical work done for my solenoid valve. Just need to neaten up the wiring and figure some way to mount my switch besides using zipties. So, I fire up the tractor and after quickly finding some loose fittings my bucket curl doesnt work. I can hear the solenoids switching. I...

Anyone know what type of thread is on the JD hydraulic quick connects? Apparently, its not the type that I bought all my fittings.

99 445, do they have the plastic or steal cam gear? ANything to look for on a used one with 800 hrs?

Im looking to get a mower, finally. I need at least a 48" cut, bigger would be nice. Also, must have a power flow type bagger. We looked at a 99 345 with 500 hrs. Was in nice shape but it didnt have a bagger. Price was $3000. The misses didnt like driving around (this was the first one and...

Anyone know where to get them? Tractor supply seems to only have 1/2". I cant seem to find any at surpluscenter.

Looking for recommendations on replacing the 3/8 7x19 winch line on my FIW winch.

Anyone ever straighten the cylinder piston? Ive bent my power steering piston on my 4510. Been like that for some time but I would like to fix it. Its bent enough to leak fluid very slowly. New piston from Deere is about $500. Or, is the shaft perhaps replacable?

Stopped by the local kubota dealer in Tilton NH to search out box blade pricing. This was actually the wifes idea since Ive been looking for a used one for over two years now with no luck. Got prices of 1150 and 1099 for a woods GB72 and landpride 2572. I almost just picked one up, since this...

Im looking for an estimate or recommendations on transporting an 18,000 lb excavator from Pittsfield MA to Canterbury NH. Its roughly 160 miles one way.

Finally got most of my fittings to hook up my plow. Now it wont snow, which may be a good thing. So, when I get it all plumbed, how do I have to fill the pistons and hoses with hydro fluid? Will I need to bleed the system? Just need a switch still not sure what type. I have one thats always...

Well, I finally got my lights wired and installed for night time plowing. Boy what a difference. Dont know how I managed without them. So I figured that since this winter is never gonna end and Im getting tired of swinging the plow by hand, Id use the info here to add a 12vdc valve and...

Althought I still have not finished my AUX lighting project from last year I hav made one major improvement on my tractor lighting. I replaced the OEM bulbs in the head lights with some Sylvania Silver Star Ultras. What a difference. If you dont have the time or knowledge to add extra...

Anyone heard of them? I found a used 6 footer with shanks for my 4510. Havent been able to look at it yet. Dont want to drive 1.5hr one way just to see it. Trying to get some specs but can find anything on the net.

I finally gathered up most of the parts to get my snowplow finished. I have the mounting plate takced together and Im trying to figure out where to attach it to the plow frame. I would like to keep the overall length as short as possible. Right now, I have it positioned as in the pic just...

Ive read many of the posts about home built and store built dump trailers. Does anyone use them for cord wood and how have they held up? Currently, Im using a snow bear 4x8 utility trailer to get my wood out. I have to load by hand and then unload by hand. I use the trailer for road use...

I got a 4510 with 72" bucket and removable/reversable cutting edge. Im looking for a reasonably priced tooth bar that would fit on my bucket. Markhams website says they do not fit buckets with bole on cutting edge. The only ones that seem to fit cost 2-3 times as much as the markham. So...

Ive finally broken down and purchased most of the components to add worklights to my 4510. Looks like Im gonna follow some of the others here (kennyd, bloomingtonmike) and use a 30 amp breaker off of the starter to a 30 amp relay to 2 switches on the right fender switch cluster. I would like...

The tires on my york rake never hold air. Ive cleaned them everyway till sunday and they just wont stay. Short of getting solid tires, would the green slime work in these and stay inflated?

Went to the dealer to pick up my drive axle seal. Told them i needed oil for the front end as well. I didnt check my book and just asked them how much I needed. They flip open the book and say 9.8gal ! For just the front axle, I say. No thats the complete fluid change. I ask how much just...

I need to replace a seal on the front end of my 4510. Its leaking between the shoulder housing and the steering knuckle. I cant quite figure out how to seperate the two. Do I have to take the whole thing apart? Looking at JDparts it looks like I may have to take the bottom of the knuckle...

Ive got some of my lawn in this year. Just the front yard and Ive been borrowing the neighbors JD with a 48" mower. When I come out of retirement, Ill be looking to buy a mower for myself. Stopped at the dealers and looked online and seems the x300 series are around 4 grand. Even more when I...

I tried seeding my new lawn last fall. Apparently I didnt put down enough seed and its very thin. Actually, some areas I missed all together. My soil is also littered with small rocks. If I can find one to rent, would a Harley rake be usefull for grinding up what grass I have? I imagine it...

Anyone know where or how to search John Deere dealers to find a tie rod for my 4510. All the local ones are out of stock and they have to check with JD to see if they are available. I bent the tube and was able to salvage the ball joints minus the dust bushing. I may try a machine shop or...

Ive got the serial number for a john deere deck but i cant seem to find out what models it goes to through their website. I need to find out if it fits on a smaller or larger frame 4000 series tractors.

I found this while searching for mowers. Its a 1980 with 1100 hrs. I dont need the plow but i do need a mower I have A John Deere 400 with 20 hp Kohler engine, hydro trans, power steering, full hydraulics, 60" shaft driven deck, ag tires and wheel weights. Also has snow plow with full...

Im putting in a new lawn in central New Hampshire. Ive got very hard ground full of rocks. Ive got it pretty smooth but there are still many large rocks that are buried. I have a loam pile still to spread. My rake doesnt really penetrate the ground at all. I figure Ill have to dig out the...

Looking at two lawn tractors. ONe is a 1997 GT 275 with 48" deck and power flow bagger for $1500. The other is an LX173 with a 48" deck, power flow bagger, cart and spreader (which i dont need) for $1800. NOt sure the hours yet as they are private sale and Im waiting for calls back, if they...

I broke my upper center link on my 4510. Deere site shows a price of 150 for a new one. I had a guy that i worked with weld the swivel end back onto the threads but i broke it again and now Ive lost my weld contact. Anyone know of a good place to get a replacement thats a little cheaper than...

Due to the recent flooding in NH over the past months, the local OHRV park needs many bridges replaced. Since the park is in the army corp of engineers flood control, most of the bridges floated away. There are two remaining that need to be addressed. One is a 120 foot by 6 foot PT bridge...

I just got done watching all the videos on the deere website and building/pricing various tractors. After see how much faster the cycle time is on the new loaders I want to trade my 4510 in as fast as possible. Even with the supposed fast dump, there is always a pause before it actually dumps...

Would a mmm from a 4310 fit on a 4510? I dont have any information on the mower yet. I do know that the frames of the 2 tractors are different sizes. Ok, serial number m04272x015804

Would a toyota tundra be capable of towing a JD 4510 with FEL york rake and perhaps a backhoe at some point? Doesnt seem likely to me. Towing capacity is only 6500 lbs. Am I going to have to go with a ford product if I want to tow my tractor?

72\" MMM or small rider I got a 4510 with R4 tires right now. New house with no grass. At some point, I will/would like to have approximately 2 acres of lawn. I stopped by the JD dealer to get a quote on a 72" MMM and mid PTO kit. The total was about 4 grand. He then showed me an x300 with...

I emailed JD about adding a mid pto to my 01 4510. They replied that it was not possible. I just found the sales guide that shows a field installed independant mid pto, part number LVB25272. I went to JDparts and found the part exists but has been discontinued. Any idea where to look now...

My father keeps commenting on how my 4510 exhaust smell bothers him. He says that their Kioti DK65 doesnt smell nearly as bad and that he can run it in their barn with out any problems. I really havent noticed it. Its got a little over 300 hrs on it. Should I be looking for something or is...

How far would you drive to pick up an attachment for your tractor? I have found a 48 backhoe for my 4510 with about 80 hours on it for 5gs asking price. One way travel would be 8.5 hrs. Its got some scuffs from rocks on the arm next to the bucket and the hydraulic fittings are rusted. Ive...

I currently have a 2001 4510 with 460 FEL. I would like to be able to mow with this tractor using a mid mount mower. Is it possible or feasible to add a mid pto and a mid mount mower like the 72" 7 iron? I would like the MMM over a 3pth finish mower or gang mower.

IM starting to look at BH for my 4510. Stopped at JD dealer and they quoted me about 8000 for a complete setup (BH, pick up and delivery, power beyond, etc). THey are going to drop the price since its the older model. Any cost savings going with a woods or similar non JD brand? I have not...

I have a 4510 with a 460 FEL that I bought used. This is the first modern tractor I have ever used. I would like to add a snowblade, backhoe, etc in the future. The manual says that I can add upto 5 (i think, its not with me) hydraulic outlets. Im sure that I have looked right at them, but I...