Search results

After having/using the Kubota set-up for about a month now, I can say that I like it a lot. Haven't had any clogging issues, etc. and I can mow the entire yard and only need to dump the 3 bags once. If I had a complaint, it would be how the unit mounts to the machine. While the mounting system...

Thanks for the reply!

I have a BX2680 with the Kubota set-up. Used it yesterday while cutting the grass and it performed great and I'm hoping it'll make leaf collection easier this fall. Not sure if the Cyclone reduces (shreds) what it sucks up, but they say the Kubota won't reduce any more than what the mower...

Hello all. I recently purchased a new BX2680 with a LA344 loader that has the single point hydraulic connector. Machine has been great so far, but what's funny is that the right side loader arm is missing the bracket to store the single hydraulic connector when the loader is not installed...

Great. More money to spend on my new BX2680 :ROFLMAO:

Hello all. I'm shopping around for a new BX2380 and have received (2) quotes from competing dealers. One quote lists the base machine as a "BX2380V" and the other lists it as a "BX2380RV". I've searched this site and Google and can't find any information explaining the difference, if any...

Hello all. I'm in the market for a new 1025r FILB and received a quote from the dealer I bought my 2520 TLB from back in 2008. Please tell me what you think of this quote: 2013 1025r FILB Machine:.....................................................$ 22,348.00 Upgrade from49" to 53" bucket...

Hello everyone, I'm thinking about stepping uo to a 3520 TLB. I went onto the JD website and built the machine listed below and the cost was right around $40,000. What would a fair price be for a machine like this? 3520 open station cab eHydro or Auto HST (with Loadmatch and automotive style...

Hello all, I'm thinking about selling my 2008 2520 TLB and upgrading to a 3000 series TLB. My machine was ordered new in June 2008, has under 200 hours, R4s, rear lights, 200CX loader, 46BH and a modified 54" (now 66") front snowplow. It's not beaten up, but it does have some scratches, marks...

Does the 110TLB have a "creep" feature that allows for repositioning the machine while running the backhoe? If so, is this a standard or optional feature? Thanks Ryan

Hey all, I need to remove the pivot/push beam (#30) from the A-frame (#27) on a front Quick-Tatch set-up. So far I've removed the main pivot bolt (#33 below), but can't get the bushing (#32) out. Does anyone know how to get this bushing out? Thanks Ryan

Hello all, Does anyone know what size fittings (#2, #18 and #19 in attached parts diagram) are used on the 2520 power beyond kit where the pump and return lines come off the SCV?

Just curious what size/weight trailer you need to safely transport a 110TLB. Ryan

Does anyone know where can I buy strips of urethane in order to make a custom cutting edge for my JD snowplow?

I bought a 54" JD plow last year for my 2520 and found it to be too small for my tractor. So I sent it over to a fabricator I know and had the width increased to 66", the moldboard height increased to 20" and had the A-frame extended out 6". I know that it's best to keep the blade as close to...

Hello all, I'm working on a snow plow project on y JD2520 and want to use a 12VDC solenoid cartridge valve to control the single acting lift cylinder. What kind of valve (i.e. 3-way/2-position, 4-way/3-position, etc.) valve should I use. In addition to this valve, I'd like to add another valve...

Is the return line on an open-center system pressurized?

Hello all, I just picked up a used Meyer snow plow blade that I plan on fitting to the front of my JD2520 by means of custom made frame mount. Now I know from past posts that I can hook each single-acting angle cylinder to the SCV's dump/curl ports, however can I hook-up the single-acting lift...

Hello all, What would a good price be for a new 2305 with a 54" MMM, mid PTO, independant lift for the mower deck and a 200CX FEL? Thanks Ryan

Hello all, I originally tried posting this question in the JD forums, but got no responses, so I'll throw it out to the hydraulics gurus. I have a relatively new 2520 with the 46BH and it seems that every time I use the backhoe, I'm constantly setting off the relief valve when digging through...

Hello all, I have a relatively new 2520 with the 46BH and it seems that every time I use the backhoe, I'm constantly setting off the relief valve when digging through rocky soil or trying to bust the roots of small (under 6" dia.) trees when doing stump removals. Is there a way to check the...

Hello all, Recently the 200CX loader on my JD2520 has been acting up. It lifts, lowers, dumps and scoops fine, but when you tilt the bucket forward and try to backdrag the ground with the cutting edge, the bucket rotates upwards (like after you drive into a material pile and big to "scoop" it...

Hello all, How much do the JD ballast boxes usually cost? Also, has anyone bought one of those non-JD quick hitches, like the ones on Ebay? If so, how do you like it? Thanks, Ryan

Hello everyone, I have a brand new 2520 with a 46BH and I have a question for everyone. From time to time, I can hear and feel a light banging noise coming from where the 2 power beyond hoses connect with the 2 main hydraulic lines that power the BH. You can also feel it while sitting in the...

Hello everyone, As I posted last week, my JD2520 FEL/BH arrived last week and so far its been great. The machine has basically done everything I've asked of it. However, I have some questions about its strengths, weaknesses and overall abilities. Basically, I don't want to break it. 1. How...

Hello everyone, My new 2520 just arrived this morning!!...:). This thing is awesome and worth every penny and then some. I'm so glad I went for the 2520 or the 2305, even though the 2520 is a little "more machine" than I need, but what the heck, you only live once. So far I've logged only about...

Hello all, I have a 2520 FEL/BH on order and I have some questions about the 200CX loader functions. While I did test a 2520 at the dealer before ordering, one thing I don't remember is whether or not you can perform multiple loader functions (example: raise the loader, while curling the bucket)...

I know a 2008 2520 has a higher Hp engine than a 2002 4110, but is the 4110 dimensionally bigger than the 2520? Ryan

Hello all, Just got back from the JD dealer, where I test-drove a 2520 FEL/BH. There is no doubt in my mind that the 2520s are hands down a better machine than the NH T1110 I looked at on Friday. So here is the "no haggle" price: Machine: JD 2520 Year: 2008 (would need to be ordered) FEL: JD...

Hello everyone, Can you get "Load Match" on the 2520 machines? Thanks Ryan

Hello all, Just curious as to what the "D" and "DA" after the model number means? Ryan

Hello everyone, Can you get "Load Match" on the 2520 machines? Thanks Ryan

Hello all, I'm in the market to buy my first tractor and I was wondering if you can negotiate the sale price or do you just pay what's on the sticker. Thanks Ryan

Hello everyone, I'm in the market for a tractor and have narrowed my choices down to the New Holland T1110 or John Deere 2320 & 2520 machines. Well, I went and test-drove the T1110 today and while the overall tractor was very nice, I noticed that when completely letting off either the forward...

Hello everyone, Although I've been a member for quite awhile, just don't post much- I do a lot of searching and reading though. Anyway, I've always wanted a small FEL/BH for my yard projects, clearing snow from the driveway, etc. and now that I can afford one, I'm seriously starting to look at...

Hello all, I've read a few posts where guys made templates (wood, cardboard, etc.), then took them to a steel place and had them reproduced in steel. How much (ball park figure), minus the material costs, does it usually cost to have it done? Thanks Ryan

Hello all, I'm new to this site and I've been looking at buying either a new or used compact or utility tractor and my questions relate to transmissions. Can some explain to me how a shuttle shift transmission works. Is there a clutch, a gear shifter, etc.? Also, what is the technical name...