Search results

Can anyone tell me if the boom on their backhoe gradually lowers on it's own after it is placed in the most upright position? This lowering occurs both when the tractor is running and when it is turned off... I really appreciate all the support this site have provided while I work the kink's...

Can anyone provide some insight on the following issue: 1) With the tractor ideling for a hour the FEL hydraulic control box gets hot (the fluid is getting very hot) 2) after 1.5 hours ideling, one of the lines that screws into the fel hydralic control box started leaking (pretty big leak)...

If anyone can advise on the following, it would be great: 1) I am trying to install the backhoe on a JM254 -after installing the hydrolic lines to the pump above pto staft, I get no pressure to the backhoe -i am assuming no pressure because nothing will work on the backhoe hydrolics -the...

I have a new Jinma with 3 hours on the engine. I have attached a photo of the problem. Please give any advice on the following: 1) There is anti freeze dripping on the left side of the engine 2) The anti freeze is dripping between the front most exhaust manifold and the middle exhust manafold...

When I mounted the FEL bucket, there are spaces of about 3/4 of an inch between both hydralic cylinders and the bucket. Is the 3/4 inch space correct, or should O add a few washers to eliminate the play? Any help would be appreciated. Thank You

This message board is great!! I could not have assembled my 254 with out the help from all of you. I do have a couple of additional questions: 1) Fuel gauge is not working? any ideas? 2) Any break in advice for engine rpm's and gears (h/l - creeper, etc..) 3) Will try to assemble the frontend...

I have a few questions on the assembly of a Jinma 254: 1) What is the knob under the seat? -I thought it was a filler for the hydraulic fluid - It has a spring between the frame and the knob 2) There are two washers on the fuel input (on engine) but when I connected the fuel line...

I just took delivery of a JM 254 and was concerned about the possible leaking fuel tank. Below is a good remedy: 1) buy a can of rector seal 2) lube the fuel insert between the the two rubber rings with rector seal - let it sit for two day's 3) No more fuel leak's from the neck when you fill...

I received a crate tractor, FEL, and BH over the weekend. I have a few comments, and then a few questions: New 254's now include - inline hydrolic filter (looks like oil filter) - cigarette lighter - heavy duty under frame mounts for BH - hazard lights for ROP's - Questions: How do I drain...

I'm in the electronic's business, and import to the US from asian countries. I'm looking for a small 4x4 tractor for my property and located many tractor factories in China. Jinma, Hubei, etc.. However, I read a post about engine's and the EPA as well as a Foton (illegal to import). Any...

china-ML-519567-ML-