Search results

Greetings, Does anyone know where I could procure slip yokes that are on the Kubota BX Mid-PTO driveline (part# 70060-01147)? I had one yoke break, and seems simple enough to cut off and weld on a new yoke. I know NOTHING about shaft lines or where/how to procure parts, but very fluent in...

Greetings fellow TBNers! Been quite some time since I posted. Ive been having a recurring issue with my BX2750 snow blower set up for some time. The first time it happened near scared the crap out of me! During a routine snow storm in 2014, I was blowing about 6 of typical New England snow...

Greeting everyone! Its been a while since I posted. I just acquired a new (old) ZD331. In going through it, I came across two things I can't figure out. Once is a set of lift arms that do not seem to have any current purpose, but look like they may have been part of an accessory or an...

Has anyone tried to find a really wide turf roller? Well, the wider you go, the more damage that your turf can incur, especially when making tight turns. The outside radius of the roller is going to want to spin at a faster rate than the inside radius of the roller. Seeing as the roller...

Ok, before all of you ROPS police start up, let me make the disclaimer that I am a big boy and responsible for my actions. Further more, above all, I use common sense when operating my machine, whether cutting the lawn, plowing snow, or using my BH or FEL. Started out the by upgrading the...

I recently heard that in order to use your FEL or BH on other than your own private property in MA, you need to have a Class 2B Hoist license and be insured up to $400,000 liability. Do any of you fellow taxachussians have any info on this? I also hear if it is under 25hp, less than 10ft BH...

How to choose the correct die for 1\" stock As my profession is electrical engineering, I am quite ignorant when it comes to machining. Can anyone tell me what the proper (or standard) size threading die I need to use for 1" mild steel round bar? Does anyone have a refernece chart that...

I purchased a BX loader level from American Solutions a few months ago. It installed very easily. It is very effective as well. The only thing I didn't like was how the upper support bracket is attached to the loader arm with a hose clamp. It worked well, just looks a little cheap. I...

Finally got around to welding on the bucket hooks for the LA181 FEL on my BX1500. The end hooks are 3/8" weld-on forged grab hooks (WLL 6600#). I welded them on a piece of 2"x4"x1/4" flat stock for added stregnth. I also did not weld them right to the edge, as this would prevent a chain from...

Has anyone out there installed or attempted to install the high capacity alternator kit (BX7310A) on a BX1500? My dealer has informed me that, even though it is listed as a BX1500 option on the Kubota website, the high capacity alternator kit is only for BX18xx, BX22xx, and BX2x. After looking...

First off, sorry for the long post. This past weekend I helped a friend level 60 yards of loam across about 1/4 acre. It was about 95F and RH was about 80%. I was about half way through the last 20 yard pile with the bucket loaded about 2/3 full and my front left AG tire slipped right of the...

I finally got the digital camera out today. Here are the long awaited pics of the Woods BH6000 on my BX1500. As I have stated before, performance is great. The only thing I am a little concerned with is transporting the BH on hilly or sloped grades. To compensate, I just load the bucket up...

Does anyone still have the link of the guy selling the BX Rotary Brush from PA on eBay...I can't seem to find it and it is no longer in eBay's completed auctions.

In addition to my AG tire deal, I have a rear remote port option for some BX owner who might be interested. As some of you know, I successfully installed a Woods BH6000 on my BX1500. All I can say is INCREDIBLE! Not only is the construction of the BH great, but it does a great job of digging...

It all started when I wanted to put a set of loaded AG's on my BX1500 to get better traction while snow plowing. As I found out the hard way, you can't put 18x8.5-8 AG tires on a BX1500...the inner rim does not fit over the front axle hub! I had purchased a set of barely used (99%) AG's off a...

Greetings everyone. I just acquired a brand new set of AG tires that came off a BX1830. Knowing that they are slightly larger than what is called for in the BX1500 spec sheet, I not only purchased them (online), but when they came in, I had my dealer fill them with Calcium. I got the call...

When I purchased my BX1500, I really wanted a backhoe, but the dealer told me there is not one made and I would have to have one custom made, as Kubota does not recommend any current after market manufacturer's backhoes be installed on the BX1500. With that, i started researching who fabricated...

I recently purchased and installed the quick hitch and TG2754 plow to my BX1500. Much to my dismay, the manual angle control requires me to get off the tractor seat to change the angle. I use the plow strickly for snow. Does anyone have any ideas on mounting a ram to control the angle. Much...