Search results

Hello, when trying to check my right axle oil it is always shoots oil at me is it vented why does it force oil out the top plug?

Hope I will be happy with it seems to be more tractor then the others I was looking at weights over a hundred pounds more.

Looking at these three. CC $3200 JD $2750 K $3400 Leaning towards the CC, seems this model CC may have a better Rep. What do ya'll think?

Anybody been around any of the Kubota lawn tractors? PLEASE!

Looking at a Z-turn 42" with a Honda GXV 530cc motor for $2750.00. Motor alone has me leaning that way and it is made by Toro and has a large cast iron front end, but the deck looks so so. Would this be a good deal?

Did a couple of searches read a bunch of posts. Some said HD JD is better than Craftsman, what do ya'll think? BTW new place is a flat acre with Est. lawn.

Which would be better? The 24hp is a V-twin and I think the 20 is a single. Which would last longer? I know the B&S should run circles around the other.

As Mobil 1 Turbo Diesel, it is not at Walmart yet and may never be but I got mine from O'Reilly's. Saw alot of posts on this and I am trying to help clear up the confusion.

Got a cheap 5000W generator I had for years, one of my farms has no power and I saw the 125A gas-stick at Sams for $1200.00+ and wondered if there might be the way to go since I all ready have part. Rather have stick and would like to be able to do repairs on my attachments. Anything out there...

Well I was hung up on my M9000 and locked the axles while a front wheel was spinning, it went pop and stopped and I thought everything was alright. Pushed the tractor hard again yesterday pushing downed trees and noticed a small amount of oil on the inside of that wheel. Tractor does not pop or...

Well I have been screwed again! Went to buy some 5W-40 from Wally World and just like I had read here its now 5w-30 and marked for gas engines. Know it is still out there under a different more expensive package and my Powerstroke takes 15qts so at $20.00 for 5qts I was in hog heaven. Whats...

Got a used cylinder with JD ends, what does the Kubota require and where's the best place to buy them?

Hello, been looking at discs and most of them have the same flat bearings that fit on the gang between the discs. Found a strange disc that the spacers between discs its marked Schaffer but its totally different the bearings are inside the end of each gang and angle iron forms the ends, Anybody...

Will my M9000 pull a 12\' offset? My M9000 has 4WD and 90hp will it pull a 12' offset disc?

Won a Millonzi 66\" root grapple on Ebay! Need a root grapple for my M9000 so I can stack hundreds of dead cedars to burn that have been cut on my 160A the last few years. After seeing Island Tractors Kioti I feel like the Millonzi will work for me. My Bush Hog 546 loader is Q/D but is not skid...

Got a bigger tractor and wondered if I was careful if I could use the cat.1 on my bigger tractor?

Need to plow under some love grass to plant native grass. What size disc and what type disc offset or tandem should I look for?

Have a B21 for my forty acres and bought 160A more so I was going to get a L3130 then I thought about a L4400 and I did not know if that would be big enough so I started to look at a MX5000. Then I saw this on Ebay with just a buy it now for $18500.00 with no auction and I could not help...

Need a grapple to move downed cedar and the bucket will be the best and cheapest. But will the rake do a better job?

Going to sell my B21, wondering how ebay charges.

Hello, wondering what a 2002 M9000 with 1200hrs in good condition is worth? No cab.

Hello, got a 12,000lb bumper pull with one brake axle. While my brake is plugged in the light on the brake control lights even with the key off. And the rear tires on the brake axle looks like they have more wear and are different the brands the same but look like different patterns with the...

Will a 2002 Kubota M9000 have a Turbo?

Getting a M9000 what size of mower will it handle?

Found a used M 9000 I had to have so it weights about 5800lbs without loader. If I wanted to carry a mower and BB and maybe load tires what axles would I need?

Picking up my Kubota M9000 with a 546 Bushog or should it be Brush hog loader, 1210 Hrs, QD bucket and pallet forks, two rear remotes, and a sunshade on a folding ROPs $18750.00. Should I remove or fold the shade to trailer? Got a 20' car hauler with one axle brakes and two 7000lb axles. Is...

Looking at a 2000 JD 4500 W/ FEL with 850 hrs. Is this a current model if not what replaced it? About what does it weight? Whats the HP rating? Thanks,

Hello, What size of trailer do I need for a mx5000 with FEL, mower, and loader tires?

What are the main differences?

Tractor for moving downed tree\'s. Hello, have a new 160A that has had a cedar tree cutting done and need to stack trees to burn, and have about 60A to plow one time to plant native grass. How many horses and what model do I need? What kind of attachment will work best with my FEL to handle...

Hello, drove all three trannys today and I already have a HST so I know all about the HST the endless threads and how its a favorite so lets not go there. Will be doing some plowing and I liked the GST and it seems easy for my wife to learn. Does anyone that has one have anything to add such...

Looking at Kubota L3130DT's and am needing to know what size plow how many bottoms on my mostly sandy soil?

Hello, my dealer in OKC is way higher than the other brands I think. Got a quote for $19,715.00 for a DK 35 is this too much?

Got a 1998 B21 with around 1500 Hrs and no backhoe, good condition, whats it worth retail?

Looking at a 3130 DT and have seen some people think the HST 3130 is underpowered wat about the gear model?

Know this is a tractor board, but I trust you guys. Whats the in and outs buying a small used dozer to work over my 40AC?

Hello, dad sold his 4020 to my little Bro, and now he's looking at a smaller tractor. Told him about the L3400 and wondered what a gear or a HST might sell for with no attachments or loader. Bought my B21 from Lindley at Cordell OK, he is between me and dad and would be handy for dad too.

Know what GSXR1100 thinks, but between the MOBIL 1 5-40 Truck oil and the Rotella 5-40 Syn. which has the best numbers? Whats the difference between CH-4 rating and a CI-4? No wars please only the facts, if Wally stocks a better Syn. let me know. Now M1 comes in a five quart for under $20.00...

Seems my B21 is leaking out the overflow hose. Does it need a new radiator cap?

Hello, my B21's loader line has a pretty good dimple in it, will it make problems like higher pressure or heat?

Kubota says oil every 100hrs and new filter every 200hrs. Why?

Hello, can anyone give me any pointers on this?

My B21 just started running faster, sometimes down a steep hill my RPM's would climb to around 3000RPM's now the last couple of days I got to watch it or it will hit 3000 a lot. Did something get bent, like a lever, what is going on?

Hello, can anybody tell me which model of J.D. this is?

Have a B21 and it looks like it might have a positive crank case vent over the front axle around the oil filter. Do most tractor's show alittle oil there? Mine has some that ends up on the front axle.

8\' JD Vanbrunt(sp?) drill parts? Looking at a couple of 8" drills both have fertilizer boxes, one has a agitator in the seed box, and Hyd. lift and looks newer with green paint. One is the Al. color with manual lifts. Can you still get parts like gears and discs, what would one be worth? And...

Just got around to posting, have used the winch for three weekends and its a life saver. Rated at 6614 lbs with 200' of 10mm wire, and weighs in at 518 lbs. The Tajfun is heavier than a Farmi 290 and comes with a little more cable. Anders at Scandinavian Tech was great to work with and was...

To help me in my war on Cedar trees I have decided to buy a Tajfun logging winch like a Farmi but has a 200lb heavier frame, 200' of 3/8" cable compared to 165' of 5/16", automatic band brake instead of dog rachets, larger winch drum, heavier clutch, and pulls 6614 lbs. Includes large safety...

Hello, Have started my war on Cedar trees, and wondered if using the FEL hooks on my bucket is a mistake? Its better to me dragging them backwards with my FEL so I can see whats going on. The trees are whole and some of them are large. My B21 will pull the bigger trees, but I worry about...

Got a good start on our war with the cedar tree's. We have thousands that must be cut by hand because of the steep slopes and amount of them. We would cut the outer tree's at the top and I would drag them out with the Kubota B21. Some of them are sixty to eighty foot tall with bases between...

Hello, looking for a tree shear lite enough to mount on a B21?

Hello, I have seen the Farmi winches and think they would be nice but, have any of you found a cheaper setup?

Anybody try to dig a small pond with there FEL?

projects-ML-550667-ML- Moved to projects forum.

Hello, my dad ruined his JD by diesel getting in the motor oil. So are all of Kubotas dipsticks prone to the rubber shrinking, and did I read somewhere the level might change because of the rubber moving? My level is above normal on my B21 but it is a used 98 model with 1300 hrs I just bought...

Priced the Super UDT at $40.00 a jug, is there a cheaper place to get it, or is any brand as good plus cheaper? NH's fluid is $18.00 a jug.

Hello, just got a B21 and wondered how big of tandem disc and brush hog some of you guys have run? Thanks,