Search results

I've tried starting it in all 4 gears in low range with the clutch held down and then hitting the brakes hard, which worked fine in the past when it did it, but hasn't helped at all this time

I'm pretty sure the throw-out bearing is good because I can feel the pressure on it

Mine doesn't have a pin, so I'll have to make a block for it

It's still intact, when I step on the clutch I can feel the pressure when the throw out bearing pushes in the pressure plate

I tried running it into a tree with no luck, the only thing I succeeded in doing since it's a 2wd with directional tires, was getting it stuck, because I couldn't shut it down soon enough and it dug itself down, I'll try chaining it to a tree in a day or two as soon as it stops raining, thank...

I have a 4500 2wd that the clutch is stuck on, it's done this before after it sat for a while, but I was always able to get it unstuck by starting it in gear and hitting the breaks, but this time it sat for 2 weeks and stuck again, and so far everything I've tried hasn't been successful, anyone...

Oldnslo, I know I'm getting old, but I'm not sure i know what you mean by double the position of the 3 point

Yeah, I thought about the the filter, and since it's time to change oil, I'm going to order both and change the hydraulic filter while I'm at it, I just wanted someone else's opinion that may have ran into it

I have an 07 4500 2wd and I notice Sunday that the hydraulic line going from the bucket control valve to the main body right in front of the seat by the draft can valve/ lock started pulsating, if needed I can try to upload a couple of pics and maybe a shot video, has anyone had anything like...

Hey guys need to pick your brain, my 07 4500 is not responding to throttle, when cold it seems to be fine, after about 15 - 20 running it starts cutting out and puffing smoke then after a few minutes it just won't respond when you step on the throttle, but idols fine, I just replace both fuel...

hey guys. I am hoping one of you old pros can give me some info, now I am pretty good at auto mechanics and based on my knowledge there I guessing my clutch just went out, I went to use my 4500 today and I cannot get it to go in gear, when I try to put it in it just grinds and wont go, I had no...

I just inherited a 1946 avery model a tractor that's been in the family since the day it rolled off the lot. I was hoping that some you guys could point me to web sites where I can find out more info on it and a place where I can find tires and wheels to fit. the motor will run but I have a lot...

Can anyone tell me what wheel pattern is on a gooseneck trailer with 7k axles, for example I know that most 3.5k axles take a big bolt chevy wheel and 3k take a small bolt chevy. Any help will be appricated

can anyone tell me how to repair the hours meter on my 07 Mahindra 4500 without replacing the instrument panel

I have a 2007 Mahindra 4500 2wd that quit on me , I replaced the fuel filters on it and have bleed the system many times now and still can not get it to start. can anyone tell me what else to do or try. thanks