Search results

This is a New Holland L35 Skid Steer with a Vickers transmission. It works properly on flat ground. Goes forwards, backwards, turns both directions just like you would expect. The problem is when I am on a hill and the machine is moving forwards down that hill. If I pull the left steering...

I have a fairly substantial leak on the bottom of my Kubota L3700 HST. This tractor is very similar to a L3400. The leak drips when the engine is off, and is a steady stream when the engine is running. The leak is just forward of the three pressure testing ports. If i'm reading the repair...

I decided to scrap the idea of making my own beam and decided to use an 8"x8" beam (the real name for it is W8 x31). I'll enclose the ends of the beam as was suggested. I only plan to use it horizontally, and will make it so I can lower it completely to the ground if I have a big round to...

Would this beam work? 6" top, bottom, and middle. all 3/8" plate

I'm going to build a log splitter and I was hoping to use some metal I have around the yard. Rather than buying an I-Beam, I am considering building one out of 3/8" x 6" plate over a piece of 2"x2" 1/4" wall structural tubing. Would this be strong enough for a cylinder with a 24" push of 14 tons?

I added 4 ports to the back of my L3700. I used a Prince stacked valve. The first two sections have float, the third is a normal spring return valve, and the forth is a detent valve. I ran 3/8" hose for all the plumbing. The stacked valve is actually pretty heavy and I made a mounting plate...

Picture of painted valve and mounting location.

I'm installing a stacked set of Prince SV valves on my tractor. Do I need to paint them? I'd rather not paint them if I can get away with it...

66" grapple on a Kubota L3700