Search results

I agree. If the 3rd function was standard on the CX2510, I would have tried it. If I had never known about a diverter, I would have paid for the Kioti 3rd function (like the dealer wanted me to do) and probably would have been happy with it not having anything to compare it with. Unfortunately...

I did some research to understand the difference between how a diverter and true third function operate. As I previously stated, I'm comfortable with the way a diverter works, and although I haven't used Kioti's 3rd function, I believe I would rather be able to feather the grapple opened/closed...

The flail mower is a Nova Tractor EF-155 light duty flail mower. It was shipped with 400 gram hammers (30 of them) and that's what I've been using. The hammers probably need sharpening, but I haven't been satisfied with the cut since it was new. I'm probably mowing at 2" cutting height, give or...

Tractor is a CX2510 cab. About eight acres to mow 50% St Augustine mixed with 50% weeds now. Nothing that a finish mower can't handle. I want it to ultimately have the "estate look". I have a 60" flail mower, but I'm not satisfied with the cut. I've mowed it with a MMM on my previous JD 4110...

Thanks for the info. Certainly looks just like the Woods TK60.20 which is one of the two alternatives I am considering. The other is the Land Pride 1660, which is $4K at the local Kubota dealer. $5K is the MSRP I got off the Kioti website. Looks like I should be able to get the Woods TK60.20...

Is this finish mower manufactured by Kioti or is it rebranded? Any comments (good or bad) about the mower? Thinking about getting one for a CX2510, but it seems expensive (msrp is $5000) compared to mowers from other manufacturers like Land Pride or Woods.

2005 JD 4110, 340 hours, hydrostatic, 200CX FEL, Frontier pallet forks, 60D MMM, always garaged, original turf tires, folding ROPS, located south of Houston TX. I don't want to give it away, but I don't want to wait it out for "top dollar". Suggested price?

I just put a deposit down on a new CX2510HCB. Dealer says it is a 2024 model and he received it about a month ago. Serial number is SX3DAnnnn. According to the previous chart, that would mean it's a 2017 model (pretty sure that's not the case), but tractordata.com says the CX2510 was introduced...

Tractor on dealer's lot has R4's. Getting factory R14's would cost me more than getting the Versa Turfs. I'm sure R14's would be better than R4's, but the Versa Turf reviews make them out to be the best tire for my purposes.

Can someone please verify that these Versa Turf tires are the correct sizes to replace the factory industrial/R4 tires on a new CX2510HCB, e.g., same wheel size, no modifications needed, no extra parts needed? Rear - Versa Turf 12R16.5 (SKU 6L13541) Front - Versa Turf 23x8.50R12 (SKU 6L13551)...

Thanks for the info. My only concern was that I might be missing some good enhancements available on 2025 models. The dealer said both tractors were delivered to them a few weeks ago.

Just found out that the two CX2510HCB's on the local dealer's lot are 2024 models. Saw it on the quote sheet but dealer never mentioned it. Both of them are new. Are there any differences between the two years? I don't know where to find any info/specs on the 2024 to compare against the 2025...

I have a 2005 JD 4110 ("MCUT", 20hp). I purchased it new. It currently has about 350 hours on it. Always kept indoors. It has a 60" MMM, but I have only used the tractor for mowing maybe 100 hours, probably less. My 5.5 acres was already cleared when I bought the property (neighbors referred to...

Summit said the generic diverter kit will work for controlling the grapple.

I did more research, watched a few videos, and I think I know a little more but still not enough. I understand the difference between the 3rd function kit and the diverter. As previously stated, I'm familiar/comfortable with the diverter so that's what I would like on a CX2510 if that's what I...

So the telescoping links kinda lose that advantage if using a quick hitch on the 3PH?

What's the reasoning behind telescoping links vs fixed length links? I'm considering a CX2510, so I'm curious.

I'm looking at replacing my JD4110 CUT with a CX2510HST (with cab), and I have a few questions... I have a grapple on my 4110 and use an Artillian diverter to control the close/open function. Most of the threads I've read here for the CX2510 talk about getting a 3rd function kit for the...

Giving serious thought to replacing my JD 4110 (2005, owned since new) with a CX2510. I'm looking for better ergonomics, better comfort, etc. More power/performance is not a consideration. I was leaning towards the JD 2025R until I found out that the CX2510 cab has AC (2025R cab only has...

JD 4110, HST, about six years old, 103 hours, original owner. I had been using the front end loader with pallet forks for about three hours to gather and stack a bunch of tree limbs that had been trimmed off. Nothing very heavy, but a lot of forward and backward motion. Everything had been...

I just sent in my last payment to Deere on my 4110, so it's time to think about trading it in. My 4110 is three years old and only has 65 hours on it. It is always kept in my shop. It has the 200CX loader with a 53" bucket and the 60" mmm with the optional kit to "keep it up" when not in use. I...

Anyone seen the JD 3 PT hitch receiver hitch? 3-point hitch tractor receiver hitch My price locally is around $150 (don't know if that is list or not) and I don't have to pay any shipping charges. Also, it comes in the right color. It should be in middle of next week. Regards, Ira

You would think that somewhere in the greater Houston area there would be a company that rents 3PH tillers. If there is, I can't find them. Anyone know of such a place, preferably on the south side of Houston as I am 45 miles south of Houston. I need it for a JD 4110 (about 20HP?). Probably...

Anyone tried to put one of the universal replacement seats with suspension mechanism on a 4110? I had one on a little Case IH 234 that resulted in a much better ride. Here's a link to one of the seats at Northern Tool, although there are a number of suppliers of similar seats, including TSC...

Trying to hook up a 15 gallon pull-behind sprayer from TSC. The electrical connections that come with it are just a couple of battery clamps on the "tractor end". I would like to set up something more permanent. Any suggestions on where to tap in with the hot wire? I would rather not go all the...

I took delivery of a 4110, 200CX FEL, pallet forks, and 60"MMM about 10 days ago. I'm going to be trailering it to another location about 15 miles down the highway pretty regularly. I did a search to get recommendations for securing the tractor/implements, but didn't see anything very specific...

The dealer messed up the order. It was supposed to have the 200CX FEL but it has the 200X instead. It was supposed to have a fixed ROPS but it has the foldable ROPS. I wanted the fixed so I could add an aluminum canopy and still get it thru the garage door. Can't do that with the foldable. He...

I'm about to order/buy a 4110 with the 410 FEL (or 210CX?) and 60" MMM. I've been seeing stuff about "converting" the FEL to be able to use skid steer attachments, which I guess are cheaper and/or more plentiful. I'm wondering if it is a good idea to not get a JD bucket with the 410, and get one...