Search results

I notice that my loader joystick will not detent into float position. (full forward) In freezing weather it will not go into float at all. Maybe me trying to force it into float is why it will not stay now. How difficult will it be to take apart to find the problem ? Actually it might still be...

Since cold weather I have been heating glow plugs for about 30 seconds, thinking longer is better. I looked at the owners manual for my BX1830 and it shows a temperature chart with a maximum of 10 to 12 seconds for glow plugs. My question is do you think I have cooked my glow plugs by holding...

I know this should be in the classifieds but it wants me to log in again even though I am logged in and it won't take my password. So here goes, I need to sell my son's (devorce) Kubota BX 2230, 85hrs. with extras. If you are interested please e-mail at jrgoodwin@verizon.net Thanks

Am I the only one that about gags when you get to enjoy diesel fumes in your face for a few hours. I didn't mind so much at first but I must be getting more sensitive to it. Maybe I need a tall stack. That will look a little silly on a BX.

Is the height adjustment on the mmm a mechanical stop or what? Why can I keep pushing the hydro lever forward and the mower deck goes all the way to the floor regardless of the height setting under the seat.

I notice that the mmm on my son's BX2230 does not drop or lift in one smooth operation like it should. As you move the lever either forward or backward the mower deck will drop or rise a small amount and then the lever will move back to center and to get the mower to move further to it's full up...

I was just wondering if the injector pump on a BX has oil in it to be checked or changed. I don't remember seeing anything about that in the book.

54\" ver. 60\" removal I have removed my 54" mmm, so I know how that goes but this weekend I will be doing the 50 hrs. hydro change on my sons BX2230 which has a 60"mmm. Is the removal of 60"mmm the same as 54"? Can I drain the hydro oil without removing the mmm? Thanks for comments.

I notice that the new BX has a 1/4" hyd. valve. Is previous BX hyd. valves just full up or full down with no way to stop in between?

When I turn the key to use the glow plugs after a few seconds I hear a clicking sound that sounds like a relay cycling on or off but the dash light stays on. It repeats the same thing every few seconds. Does the BX have a timing circuit on the glow plugs? If the dash light would cycle on and off...

Can I use the mower height knob as a position control for the 3PH. When the MMM drops to preset height the 3PH stops also (I think). Does it work the same when the MMM is removed? I'm talking BX series. Thanks for any info.

I can not get spindle shaft grease fittings to take any grease on either side of my BX 60" MMM. Can they be removed and cleaned or is it easier to replace them? Are they screw-in or press-in?

I was at a Kubota dealer in Indiana and saw what I think is a good deal on a BX2230. They have several of them and I imagine they want to get rid of them before the new 2250 is introduced. Anyway they have a BX2230 with loader and 60" MMM for $11300 after $500 rebate. This is less than I gave...

buykubota-ML-766363-ML- Kubota specific post

I am trying to figure out how to drain the oil from the gearbox on my MMM on my BX. It looks like you just have to let it drain out on the mower deck and mop it up. Is there a better way that I am missing?

I'm getting ready to remove my MMM from my BX. I've read through the owners manual and it looks easy. The only thing I am not clear on is disconnecting the PTO shaft. If I pull the coupling back, does the mower shaft get shorter by telescoping or do I have to push the mower towards the front of...

Do I have to remove the MMM to drain Hyd. fluid and change filter on a BX ?

Where\'s the tach Does anyone know if some kind of a tachometer is available for the BX tractor?

Can someone explain to me how the MMM pto shaft sleeve on a BX works. I have tried pulling it and it seems to move a little but i'm not sure how to actually get the shaft disconnected from the tractor. Thanks for help.

I tried the cruise control on my BX for the first time and was not impressed. I was driving on the road and thought I would give my foot a break. It worked ok but I could not get it to release without hitting the brake pedal or the direction pedal which would then slide the rear tires. I guess...

I'm beginning to think about an oil/filter change on my BX1830 and I am wandering about taking out the filter. It looks like it will be hard to get a hold of to take out. Does the engine cover panel need to be removed and if so does the FEL need removed to get the cover out. I usually use filter...

As I am mowing with my 54"MMM I hear the wheels rattling along the ground. My ground is relatively smooth so I lifted the wheels one hole but now it seems like the wheels are too high above the ground to do any good. Which is the best?

I hope this forum has the policy that no question is to dumb to ask, so here it goes, what is a grey market tractor?

What is the deal with the FEL bucket float position on the valve. When I push the stick forward it has to go through the down position before it gets to float position. When you do that you are putting some serious down force into the thing and cutting into the ground. Am I missing something...

How can I get rid of my juniper shrubs/bushes (what ever) about 4 to 5 feet in diameter x 18" tall. I don't know how big the roots are. I only have a FEL on a BX1830 so should I just hire someone with a bigger tractor or do you think I can chip away at them with my loader. I can get to opposite...

ok I got my new BX1830. Dealer demo'd removing and installing FEL. It came off pretty good but took 3 people to get it back on. He apologized and said it must not be on level ground. Is it easy for the inexperienced person to install if it is on level ground ? Thanks for any commennts.

My BX1830 is ordered so I have not seen the owners manual. Can I do the first 50 hr. service myself with just this manual? Thanks any comments