Search results

Sold my b2620, want a cab enclosed and something a little more powerful. the 2620 didn't have the grunt to power my chipper or have the 3pt lift capacity for my sander... So had my heart set with the 3350... reading horror stories on regen but cant get a feel for how big of a deal this is. This...

Any time I move PTO lever from 540 to neutral I get horrible grinding. Happens occasionally moving from 960 to neutral as well when mowing. Is there an adjustment somewhere? ANd yes clutch is depressed. When there is no load on PTO its not an issue... I am perplexed. No matter how gently I move...

So wanted to give my 2 cents on the ever popular bx vs. b debate on here and give you my personal experiences. I started with a BX 2230 loader/mower and loved it. Sold it because I got a great deal on a zero turn (Kubota zg223) and already had a b7800 for loader work. Well the zero turn was not...

Just purchased this tractor and went to put on the 3pt arms on for the first time and they hit the backhoe subframe.. this is a huge problem! Anyone else have this setup? I cant believe it. They had to add the extension rails to mount the backhoe to the tractor (only way to mount hoe to grand l...

We have a b7800 with front mount blower, and a rear sander with a cab. We blow a long curvy driveway with elevation changes. So far it hasnt been as good of an expirience as expected.... I much prefer my l3200 rear mount but I digress. Besides blowing through shear pins at an alarming rate...

I had rear remotes added by my dealer and now I am questioning if this is going to be ok to do what I want. Please excuse if I do not use the right terminology for the parts They added the Kubota valve for an additional remote and the power beyon runs to this valve. I have quick disconnects but...

Recently purchased a used 2009 zg222 with pro deck with about 20 hours on it. It seems to surge a bit when at full throttle, looking at the throttle linkage when running the actial cable is connected to a spring affair that doesnt do anything unless the machine is running then seems to use...

05 l3400 hst with about 200 hours on it. The hst peddle seems to need adjustment but cant seem to find anywhere to do so. Its sticking in forward and reverse. Does not want to "spring back" to neutral. No grease zerks to be found either. I see like a damper rod but doesnt seem to do anything?

I have a l3400 with bh75 and looking at a b3200 but want to keep my backhoe. Dealer says the subframe is compatible with Bh75a and bh76, 77 and my BH75 will not fit. What is the difference and is there any way to modify?

Currently I have a bx2230 and a l3400 hst. Both have loaders, BX has 60 mower deck and the l3400 has a bh75 backhoe. The L doesnt get used very much any more so i am thinking about consolidating but need something bigger than a BX line. The big question is i dont want to "rebuy" a backhoe and...

Brought my l3400 hst in for service because of an engine noise. After machine is warmed up anything over 1800 RPM had a knocking noise. Sounded like it was coming from the valvetrain. Dealer hears noice but doesnt know what the problem is but says something deffinately isnt right. They looked at...

I have a 05 l3400 HST with about 150 hrs on it. Its the bad serial number series :( Here is my problem/question. When running at pto rpm the motor has what I would describe as a valve tap sound but at idle and up to half throttle sounds fine. I do not remember it making this noise and from what...

Looking for a loader for my bx2230 and I see the capacity is pretty shabby around 500lbs. My buddy just bought a JD2305 which states lift capacity of 800lbs. Now I have read on these forums john deere measures at the pins but to testthis we put 900 lbs in the bucket and it lifted it fine! So my...

I want to get a loader for the bx2230 but have a few questions. How much different design is it from the new loaders on the bx series? Will the controls stay on the tractor? Can I get it with a 4 way valve? How much should one expect to pay? Does the bucket have a quick attach option?

First thanks to everyone for all their help and insite. This forum is great, and as a member of many forums regarding various topics this by far is the most "helpfull" and the most proffessional. A little background info to qualify my review. I purchased a new house with about 2 acres of...

Bought a 2004 BX2230 with 134 hours on it and have a few questions concerns. The manual states that the hydraulic control lever will automatically go back to the neutral position. This one won't and just makes a relief valve like noise when left up. Secondly the hst peddle sticks in forward...

Since we had the discussion about how hard do you use it and if you do "abuse" it how long will she last.. What have you broke and how did you do it? Share your ooops moments!

I am confused on some of the attachments and hope you guys can help me out. If I go out and purchase a loader for this will I be getting the new style one with curverd arms or the old one? Inother words the new BX series machines ate the attachments the same? Power blade, on Kubotas site it...

I was doing some logging yesterday with my l3400 hst and was pretty hard on it, skidding logs I deffinatley pushed it to the max, on several occasions ramming forward to get the twitch moving. On a few occasions something would fetch up and tractor would buck etc. Didnt think much of it cause...

Found a used 2004 BX2230 at a local dealer. Has 134 hrs and 60" deck. No loader. Turf tires. Price firm $6500

I want your thoughts on what to do. I have roughly 3 acres to mow and am doing so with a cubcadet lawn tractor with 50 inch deck. its 26hp and only has a ground speed of 5.6MPH.. takes about 2 hours to mow lawn. Not a lot of trees but two Big willows and some big ditches near the road...

I have a l3400HST with 63 hours on it. I dont use it often so maybe this is normal. Seems that when it is first started you can hear like an air suction noise somewhwere that sounds like its from the motor area. Not the air breather but somewhere else. I couldnt pinpoint where the noise is but...

Well put the backhoe on last night, havent used it since last october. All controls work good except left stick lowering boom. It will move about half way then there is a major resistance. Boom does lower and is under pressure, just slow, like its not fully opening up. Pulled cover away from...

Is there a web based parts diagram somewhere? I am trying to find out if the dipperstick arm has a bushing inside where the arm connects to the boom arm.

Last week I posted about the dipperstick arm twisting on my BH75 backhoe with less than 10 hours on it. The second failure in a year. The more I think about how this couls have happened under its own power, how fragile this must be and reading comments from others with thousands of hours with 0...

l3400 with loader and bh75 backhoe. 1 year and 1 month old 40 hours. First 5 hours on hoe I broke the cylinder in half. This year, first time I use the back hoe higing out my second old stump, while curling the bucket the bucket twists, twisting the arm cylender and connecting pieces on the...

I Know the tractor weighs in at 2600lbs But what does the loader and a bh75 weigh? And what about r4 loaded tires? I am looking for a trailer to move it around a couple times a year short distances and wondering if it will come under 6k?

owning-ML-869137-ML- Specifically for Kubota

My l3400 HST seems low on power, I guess I am looking for some reasurance. There are plenty of times when I could easily stall the engine in Low range at pto throttle doing loader work. I feel that with 34 HP I should be spinning the wheels. The terrain is usually a mud/clay with a fairly hard...

Tractor is still down, been two weeks, not impressed. They got the cylinder in but the fittings do not fit the old cylinder so back to waiting....

Finally got around to using the backhoe after cutting trees for a 1000 ft road, on my third hour of digging stumps, *SNAP* Dipper cylinder broke in half!!! Wasn't doing anything unusual, funny the cylinder looks like cast aluminum inside

Having a blast!!! The other day I dug a good sized rock out of the ground, the shape was long but round. Fit in the bucket perfectly with about a foot to spare on one side. Loader wouldnt pick it up. Am I expecting too much? Rock did not hang over the edge, completely in bucket. Also on my...

Just purchased a new Kubota L3400 HST, FEL and BH75 Backhoe. R4 loaded tires. $23000 in Maine. After months of research and several test drives its finally over!! Here is a list of the models I tried and short comments JD 4010, Loved the HST peddle, Hydraulic lever for loader was too close...

Like the subject says, how much should I pay new less tax? 16600 is what the local dealer is asking.. How much off a typical MSRP price should I expect?

I am ready to make a purchase, looking at four choices all around the same price range. JD 790, 4010, Kubota 7610 HST and Cub Cadet 6284 (Impressive numbers) Seems the 790 has the lowest lift capacity of all? yet its the largest. Is that true? The specs show the loader only capable of like...