Search results

I was able to remove the plate by tapping down on the left hand side with a long punch then tapping a chisel between the plate and the axle alternating sides. The cylinder cap is cleaned up and ready for the reseal kit. I ground the edges of the retainer plate to make it easier to get a chisel...

My TC 40D steering cylinder is leaking. I have the end cap screwed off and the tie rod end loose, but how do I loosen the plate holding the inboard end? I removed the two bolts holding the plate, but it is stuck. Does it require a puller of some kind? I don't need to remove the cylinder, just...

I have a tc 40d, I am trying to re seal the steering actuator also. Does your tractor have the plate holding the inboard end of the actuator to the axle? I removed the two bolts but cant figure out how to get the plate loose. I have tried tapping down with a punch and tried tapping a chisel...

My 73 John deere 820 has no differential brakesbut with the pedals locked together the brakes work fine. I say no differential braking because if I pump the individual pedals fast, it may actuate the brake or not. Is there a shuttle valve sticking somewhere or what?

I changed the hydraulic fluid and filter on my "73" john deere 820, but could not remove the finger screen to clean it. I tried rotating it with my thumb to loosen it but it didn't turn, I tried pulling on it with small pliers, but didn't want to rip it, so I left it alone. Does it require a...