Search results

I have a YM347 and had dealer install the Yanmar kit at purchase so it would be covered under warranty. All metal lines up front.

We’ve had decent rains in spring and summer. Roads on ranch are high with grass/dove weed. As we move towards late summer/fall we maintain the roads where we can feed deer year around without fear of fire. I spend 6 hours on YM347 with shredder. Had my EarPods in and life was good, even...

5” c-clamp for me. Cheap.

I’m getting those adds too. Seems like it just started happening on my IPad.

I bought a 2024 2500HD w/ 6.6 GAS, Allison 10 speed. It replaced my older 2015 2500HD 6.6 DIESEL w/ Allison 6 speed. My diesel NEVER went back to dealer/service and I did all the maintenance on it. Best truck I’ve ever owned. But service and fuel prices as well as service on DIESEL priced it...

X2 on the Danuser T3. Opening will accept up to 3 1/4” - 3 1/2”. We drive 2 3/8 galv round and wing channels. Running it on Mini-Ex. I believe they offer a T post attachment for it.

Back in fall, did lots of shredding. We’ve had a drought and lost lots of trees, so been cutting those up and using grapple to load into trailer for haul off. In the hardest of winter, the tractor has been ‘warm’ in garage and I’ve been getting fatter! HAHAHA. Pretty weather coming soon and...

That TC is a nice rig. I’d stray from a hydro trans used, just me. I’ve also heard in hot weather when shredding (bush hog to ya’ll), they can heat up. HP, HP, HP. Which one has the closest local dealer? Best wishes.

I use QS 30wt in my 51 Willlys jeep. Always have. Oil pressure remains good and only change it once a year as it isn’t driven as much anymore. That shocked me. 30 wt is getting harder and harder to find.

Same size place; I bought a Yanmar YM347A. I went to local dealer who sells Kioti and Yanmar. Deal was much better and tractor was overall larger than comparable K. I love this tractor. Higher ground clearance, larger frame, larger wheels, Cat I and Cat II hookup, greater lifting...

My 51 Willys M38 has used QS 30wt forever.

My table sits outside. I take a grinder to it when I need to weld. I occasionally spray with WD or wipe with motor oil. Seems to be ok.

Tires and tire pressure makes a difference for sure. I run my 24 2500HD with 60 in front and 65 in rear and get a smoother ride locally. Trips/hauling I’ll put them where GM says, and yes, They’re stiff.

TODAY! We’re expecting up to 4” snow in Texas, so I thought I’d go fire up the genset and run it.

Some time back my dad, now deceased 2 years, and I were out spring turkey hunting on our ranch. While looking for a downed bird dad stumbled across a rock. It had an arrow scribed in the top of it. Realizing it was an old marker, I GPS’d it and we protected it IN PLACE where cows couldn’t...

Kinda what I was thinking. Thanks.

I’ve got a new YM347 and a 6’ shredder. My first cuts have been with std. 540 PTO. I am not familiar with 540E and would like to hear from those that have been using it. My tractor runs PTO at high RPM’s and I would say its good on fuel with 540 anyway. Std 540 @ 2783 rpm 540E @ 2016 rpm...

I added the Yanmar third function on my new YM347 for use with the grapple. Single button. Press/hold the button and it diverts flow from the curl/dump features to open/close the grapple. I would say its an electric diverter valve.

Called WR Long about tnt for my new YM347. Was told their website is not up to date as they’re in beginnings of offering kits. Was told the build engineer would go to local Yanmar dealer and spec exact unit for build. Pricing was on the upper end and they use restrictors in their build kit...

My grapple is an Armstrong Ag BGR64-5 and opens approx 60”. I run it with Yanmar 47 hp tractor. Its lower tines are .75” thick. It’s 610 lbs. I have cut trees and stacked in piles of logs approx 6 to 8 ft and brush about the same to longer. I can pick up quite a bit and dump in trailer...

Good questions and answers……… My new Yanmar was hard to detect, too. So I added a bit, maybe 1/2 qt, to see if anything changed. It didn’t. I notice sometimes when working with loader/grapple, fluid level will drop into NORMAL and the color of the indicator is a true WHITE when not covered...

Was wondering if anyone has added hydraulic top link to a YM347, and if so, which kit? Looking over them for my new 347. Thanks!

Checked lights before dark yesterday, all seems fine. I don’t believe this will affect air flow at all. I’m more concerned about the pre-filter at the radiator than this. I always keep an eye on gauges. Appreciate the heads up.

This is from Broken Anvil Metalworks. Allows you to open grill to first hole passed stop. Fit like a glove.

Echo black diamond

New 347

That should be a good tool. I just received a Ridgid, as my tools/batteries are all Ridgid.

Purchased a new Yanmar 347A with shredder, grapple, and trailer.

Took delivery yesterday. So it’s official.

I have a John Deere X320 from the JD dealer. Love it. I also have a Husqvarna. They are both good mowers, but the JD X320 is a better overall machine.

I am on the SOLD agenda at my dealer for 23 Yanmar YM347A; grapple, shredder. I researched the 72” shredders and have concerns with the lighter ones tackling the mesquite/brush on my place. I chose the Bush-Whacker HD72. It is supposed to eat up to 3”, so while I won’t do that, it is a heavy...

The full operations manual is available online at the Yanmarowners.com site.

Been a member here for a bit. Operating older machines mostly. Well, today I told dealer it’s a go! Will be signing papers later this next week on a new Yanmar YM347, Bush-Whacker HD72 shredder, Armstrong grapple, and new 20’ trailer. I’ll be using an existing 6’ box blade. I guess finally...

Going to buy either a LS 4041/47 or Kioti DK45/50SE. Need a grapple to clean up brush and trees. Been hearing a 48" grapple will work best. Will run off of remote levers supplied with tractor. Don't want to spend a ton on a grapple, but don't want a cheap-o either. Looking at Wildkat...

Considering an LS tractor.......Do you feel they are a well enough established company to handle all future sales, parts, service, warranty, etc? It's between Kioti and LS. THANKS

Can someone tell me which type hoses I need to run from the rear remotes to the front end loader to operate a grapple? This is for a compact tractor in the 40-45 hp rating. Also, any places to buy/order on the net at the best price. 3/8" i would susspect. THANKS. A Kioti DK 40 SE or LS...

Fixing to purchase new CUT. LS or Kioti, not sure. Can anyone tell me the best width for the following models as I'm not sure the tru rear tire width. Thanks. LS R4041 or Kioti DK45SE or DK40SE.