Search results

This may be an old thread, but I wanted to share that you can get to the strainer by removing the plate on the left side of the transmission adjacent to the other side. I had to remove the loader bracket that goes from the front of the tractor to the back of the tractor and that gave the...

Has anyone ever converted their cable style joystick to a all hydraulic setup? Aside from the cost, it seems like it would be farely easy. I cant stand the slop in my non adjustable cable actuated joystick lever on my mahindra 4035 loader. Thanks

I was at one of the local dealerships looking at Ferris zero turns and got talking to a salesman about the Massey Ferguson tractors that they sell. There was some things I liked on the Massey, so long story short I emailed a bunch of pics to the salesman to see what they would give me for my...

I was at one of the local dealerships looking at Ferris zero turns and got talking to a salesman about the Massey Ferguson tractors that they sell. There was some things I liked on the Massey, so long story short I emailed a bunch of pics to the salesman to see what they would give me for my...

I opted to go with the Bradco forks. I didnt want to have any regrets down the road. These forks are rated for 3300lb. Thanks for the info guys.

Hey guys, I'm finally able to pull the trigger on a set of forks for my Mahindra 4035. I have wanted a set of forks with the tall back, so that i can put brush on the forks, pick up logs and whatever else my tractor will allow me to do. I already checked out most of the other companies online...

Have any of you guys found other companies that sell filters for Mahindra tractors? Called a few local places and had no luck on aftermarket filters. Ended up going to the dealer(50mins away) to get the filter. I remember reading that the motor in my 4035 might be a Perkins clone of some...

Hey guys, just looking to see if anyone else has a sloppy loader joy stick? My tractor is new with only 50hrs. Had this issue since it was new. I Had a service guy from my dealer out to my house last week for a warranty thing. I asked him about the joy stick issue. He says they are all like this...

1966 JD300. Only the reverser is working and no other hydraulic functions. Already changed the fluid 3 times, changed the filters and cleaned the screen in the tranny. Working on getting some test gauges made up. Long story short, I wen't to do the procedure to see how much hydraulic fluid is...

My 4035 has 42hrs on it. The steering wheel won't stay tilted down. Turns out that the damper, for tilting the steering wheel, was a little tweaked where it threads into the lever mechanism that tilts the wheel. The part that is bent is where the threads are on the damper. There is a little...

Yes this is another " what size cutter" thread lol. Ive searched high and low on this site to figure out what size cutter I should go with, but haven't found any good info to make me sway one way or the other. I posted in the Mahindra forum asking what the 4035 owners were using, but haven't had...

Just curious to see what size bush hogs/cutter you 4035 owners are using??

This is my first New tractor that I've ever purchased from a dealer. This may be a dumb question, but do these dealers have wiggle room to bargain when using Mahindra financing? Or do they not have that option unless your paying cash? Ive called a few dealers, multiple times and got a few...

Im about to pull the trigger on a new Mahindra 4035 PST with FEL. Im still undecided if I should get the backhoe for it. Ive been doing some searching to find a compared backhoe attachment from another brand besides what Mahindra has to offer and haven't found much. Im replacing my 1967 JD300...

Well guys, I've decided its time to retire my 1967 Deere 300 backhoe(same as 1020). Im looking at the 3535 and the 4035. Been trying to get prices for each tractor with a loader and backhoe. Ive also got prices with just the loader. Undecided if I really want the hoe. I have plenty of use for...

Has anyone on here every purchased the LandPride clamp on bucket forks? Im looking at the one that are rated for 2000lbs. This was the cheapest set i could find around me, so thats why im inquiring about them. Ive also been shopping online, so ive seen what else is out there. PLease share your...

Is there any particular pattern for the bucket mounts on jd loaders? Im looking to put a set of forks on my 1966 JD300 backhoe. I have no clue if I can just slap any set of forks onto it. The loader is a 7300. Thanks Chris

Im debating whether or not to buy the clamp on forks or a set of forks for my 1966 JD300 backhoe. Is there any particular pattern that the bucket mounts are located or can i just throw any set of forks onto it? Thanks Chris

Anybody on here ever rebuild one of these pumps? This pump is coming off a 1966 JD300 backhoe. The pump was working fine when it started leaking from around the pump shaft. I disassemble the pump to find that the O-ring behind the shaft seal, was all torn up which is what was probably causing...

Just curious what brand you would pic for the cheapo 54" mowers... John Deere, Cub Cadet, Husqvarna, Sears. I already have a garden tractor(troy bilt gtx18 48") and farm tractor(jd 300 backhoe). Im just looking for something that wifey can mow around the house with, so thats why im goin with a...