Search results

Why would cause a rear axle to crack on a 2006 TC34DA? I had to replace my rear axle housing due to a hairline crack in the LH operators side. $3,100 in repair bill. last thing I was doing was moving some dirt around with the loader and back hoe on and i noticed a steak of oil behind me. Now...

Both Stabilizer antirotation bolt/pin with tab will not come out on my NH Backhoe 757C.. sprayed PB Blaster, used heavy hammer still will not budge. Any suggestions would be appreciated. here are some pictures. thanks

Looking for a Q/A plate for my NH 14LA F/E/L -- for sno-way plow conversion Where can I find one? I have seen a few on Ebay not sure which one to buy. all suggestions would be appreciated

Is there attachment (Tractor attachment) out there for sealing black top driveways? Thanks for any suggestions.

Hose pop today while working on stumps. Does it matter where I pick up the replacement hose for my 757c backhoe? JD is 10 minutes from me mF is 5 min NH is 30min. tractor supply is 10 minutes is there any difference in quality with the hoses?

I had this for a few months works great. found it at lowes for $9.00 Enviro FLO I'll have to go back and pick up one for gasoline.

I need a implement to maintain the front of my property. the ground has a swale for water. Currently using a weed trimmer. due to my physical disabilities I have to stop. So i need help spending money on a tractor attachment for my TC34DA. I was thinking sickle bar trimmer is this possible or...

Happy holidays to all. Merry Christmas.

Yesterday while planting some trees I noticed my RPM gauge was not working so I turned her off restarted and the gauge work fine. sounds like a loose connection right? While am under there what else should I cehck for? Thanks

North Star Pressure Washer problem I have a North Star power washer model 1578961A it's a 8HP power by Tecumseh with annovi reverbersi pump My engine runs with no problems. here's the problem: no pressure to wand. What I have tried so far: Replaced spark plug. replaced a 3000psi wand...

What do you guys/gals use/recommend to sharpen blades. Where would you buy it? I have 3 blades off my Landpride FDR 1672 am thinking grinder with built in angle adjustment.

looking to build or buy a pressure gauge to fit/test the 14LA loader. I tried this: Hydraulic Quick Disconnects If I build one what will I need? What size are my fittings? Where can I buy a ready to go set up (that's if there's such a thing)? Thanks

Check out this cup holder I bought it from Autozone for $9.99 you can use the velcro or bolt on for installation. I used the velcro --no problems. The cup holder is made by Bell and it adjusts to all size beverages. pictures:

How can I test my lifting capacity? Is there a test to determine how we can get max lifting. I tried lifting this rock and failed with the loader. The 757c had no problem with it -infact the backhoe picked this rock out of a ditch. The 14LA helped pushed and tumble it accross the road. here's...

Ok it had to happen after 422 hrs Has it happened to you?

Ok replaced the oil and filter today no probelm.. Removed the fuel filter clean out some orange sediment out of the bowl. replaced the fuel filter it, tried putting it back on --no way wont go on. ran to the dealer for new o ring (large one) nothing wrong with the old one. go home still the...

after removing from TC 34DA a few hours later my back hoe (757C)releases it self collaspes so it can go no further to the floor.(days later) It's a real pain in the --- when trying to put it back on it has so much pressure the hose wil not connect back on,so I have to jack it up with my...

harbor frieght asking $599 in catalog $699 in store.(seems high) It's for home use 6 jobs re: plate compactor renting would pay for the cost. I would like to buy one used -- I tried craig list and local papers. any suggestions.

Land Pride cost $34.95ea for the mulching blade part # 890-698c Can I do better? I tried google for the part and of course it shows land pride What do you guys use? is there any cross ref# for 3 party like tractor supply or should I just stick with land pride? Thanks

How much does a TC34DA/FEL/backhoe weigh? no fill in tires. I can't find info on the NH website anymore. info needed for towing. Thanks

I have 1500' of 20ga wire to bury from 1" to 3" depth Can I use my subsoiler for the job?

I had to replace my seat under warranty (lucky). It look like a old seat with dry rott on both left and right sides of seat. Is there something I can use to avoid this from happening again? 3/4 of the time she's park in the garage. It looks like the sun gave it a good cooking. sorry no pictures.

How Do I test to see if my meter is working correctly? I bought my New TC 34DA back in April/May of 2006 I have 364hrs --does this seem high

I just ordered from Harbor Freight: 1 40819-0CJH PUMP BUCKET LEVER ACTION @ $19.99 1 95068-0CJH 5 GALLON PAIL PUMP @ $9.99 Subtotal: 29.98 Tax Rate: 0.0 Tax Total: 0.00 Shipping: 7.99 Handling: 0.00 TOTAL: $37.97 one for oil the other for hydraulic fluid. what...

TC34DA HST When I let off on the FWD/reverse pedal- I end up in reverse (moving on her own) Here's what I checked: I greased the fitting on the HST fitting. Fluids are ok yes it is cold -but am checking while in heated garage. my guess is the HST electronic switch --is there a way to reset...

I lost two pins to this date. found one today. any suggestions on how to keep them in place --the quick latch keep getting knock off while am clearing, and I don't know it's missing til it's too late. **** pin $35ea at NH. so today I replaced the quick latch with a bolt and lock nut is this ok...

doing some research on chippers What would you recomend for a TC34DA. I got a price qoute for jinma for $1918.53 that includes shipping it to my door. Wood Chippers, PTO Wood Chippers the DR chipper for about the same a few hundred more. woods for $3500. I def need one renting would not...

I checked the old post about this topic and I still can't figure which way to go for work lights Is this something you get what you pay for when it comes to name brands like The NH work lights for $250. or would I get the same quaility from tractor supply? Are you happy with your choice of work...

I have a sno-way plow Sno-Way International snow plows, snowplow accessories, sand and salt spreaders MT series Can I convert it to fit on my NH TC 34DA 14LA FEL Q/A Or should I just sell it?

Just had the boys come out for a recall for the safety switch they added a kit for clearence under the seat 10 min job. part #87576439

I have a 14LA FEL bucket 68" Q/A Am looking to strenghten the bucket so I was leaning to the cutting edge for $250. Don't know how much the tooth bar goes for any ideas? currently using the loader for clearing --would this be a concern for the tooth bar --taking large trees out with stumps by...

I been at it for the past year trying to get rid of these rocks on 3.7 acres. For the past 4 months am using the Landpride 1572 rake the rake pick up the big rocks, but the 1 to 2 " rocks are killing me. even after one area is clear the rain always turns up more rocks. My question how do I get...

hi, I gave up on finding a used T/L/B -hard to find, or beat up and abuse how can anyone abuse a machine like that I found one split into 2 pieces. So I went to Dealer here's what I came up with TC26DA HST T/L/B used rear deck mower 15hrs,rake $24,250 TC30 HST same set up $25,500 are these...

I found a NH TC35DA for sale with front loader 250 hrs Owner asking $16,000 Is this a good price? what would you pay or offer? Thanks am new here. Great site sorry I should have posted this in the NH section.