Search results

CH4Ohio gets the win! There are not two safety switches for the two PTO levers, instead one lever lifts the switch and the other lever moves where the plunger engages. So one switch engaged by both levers. A clever design. My B2910 is from 2001 and early B2910s did not have a seat safety...

I just tested the starter. It is fine. The main terminal on the solenoid has 12V all the time. The ignition spade has zero volts all the time, even when I have the key in the start position. A jumper cable from the battery to the ignition spade cranks the engine. That leaves me with good...

Thank you. This is most helpful. I just adjusted my tilt wheel and it is in a notch. I never knew how to do that. I think the big orange cruise handle gives better response as I get more leverage from it. Which likely means I should grease up the rocker pedal linkages when I reassemble. I...

I had not considered the speed control lever, as I have never used it and don't even think it is connected to the rocker pedal. So I took a look. There are two levers under the gauges: left for speed control, right for parking brake. The speed control lever is down. I can push it up, but a...

Now it is my turn. Long time lurker in these forums and now I have the problem. I have a B2100 and a B2910. The B2910 is HST and acts like there is a safety switch problem. I push in the clutch, move the two PTOs to neutral, turn the key, I get all three lights, but no starter engagement...

Hi all. I am a newbie to tractors, a newbie to farming, and hoping for some guidance from some more experienced than myself. I was mowing yesterday (minding my own business, of course) when the mower blades stopped spinning. The belt doesn't move. When I turn on the electric clutch for the...