Search results

If the pail has a Massey Ferguson spec such as M1135, and or M1139 and that is what the owners manual calls for are you good to go? There is a huge number of specs on the pail. J20C seems to be fairly common and I guess is compatible with the MF numbers. Can you tell me the difference between...

Can someone provide me with a direct replacement for Massey Ferguson Permatran non synthetic non synthetic blend transmission fluid? I do not like to mix synthetic/non synthetic fluids. All the product I can find that is labeled Permatran appears to be synthetic or a synthetic blend. I am using...

Folks, What all is involved when changing the electrical system polarity? I understand that the starter motor doesn’t care. What about generator , regulator, and coil?? Thanks, Knots

If you converted a 6 volt positive ground system to negative ground, would the starter motor run backwards? If positive ground, should the feed wire to the coil attach to the negative post and the positive coil terminal attach to the distributor? Or does any of this matter? Thanks, Knots

I recently saw a video on a set of tools called QuikCenter. They are used to center drill broken bolts and studs. Searching the web gets no results. Can anyone help? I would like to buy a set or a similar one. The QuikCenter set appeared to be well designed. Thanks, Knots

If the electrode can move, what keeps combustion gasses from moving up the center of the ceramic? Spring stronger than compressed gasses? Knots

Recently saw a video on a product called QuikCenter. It is for centerdrilling broken off bolts and studs prior to removal. I would like to have that tool set but searching reveals nothing. Are they still in business? Does anyone else make a similar product? Any help would be appreciated. Thanks...

After cleaning them up, should 9N head bolts be installed dry, oiled, or anti siezed? Proper torque? Thanks, Knots

Can anyone please explain to me why the long brass tube “emulsion”? In the center of a Ford 9N carburetor is sized 10 mm? Does it mean that it was replaced at some point with an offshore tube? Thanks, Knots

Ford 9n with no fire. Coil is good, all parts in distributor replaced , points set to spec. Still no fire at any plug. Took distributor off running tractor and put it on this one, still no fire at any plug. Somehow it seems that the issue is upstream from the coil but can’t figure it out. Any...