Search results

Warning - I am not necessarily in a hurry to do/attempt this repair so this may take a while. I noticed a drip coming from the tractor and determined that it was diesel. Further inspection led me to the injector nozzle area as the source. Sprayed each nozzle down with brake parts cleaner and...

Went to neighbors to move a little dirt. Wound out over turning wheels and busting the steering box. Drove home (1/4-1/3 mile) using the brakes and a few manual adjustments to keep straight. Got home to find oil pouring from bell housing! What have I done..!

Hi all...Been a long time since I showed my face here. Quick post on hydraulic line replacement. The hoses from my loader valve to the splices in the factory steel lines were starting to go, and I am anticipating that I'm going to need a clutch soon and wanted to facilitate splitting the...

Plan on having my starter rebuilt; now that spring is coming... There seems to be considerable slop/play in my 19 mm box end wrench on the starter bolts. Anyone else run into that?

To the regular reader crowd - I have eluded to a issue I was having shifting..perhaps even eluded to shifting into either 3rd or 4th on my gearshift. This post is both a request on possible fixes and an explanation to my particular 'work around'/not quite fix to the issue. I've had a...

Winter has been pretty gentle to me thus far this year. I've used the blower only once, back bladed the rest. There's a hill in one part of my drive that for the first time ever I've been able to blow going up!:dance1: I've also been impressed in a couple spots along the road where i push the...

Not the right spot for this post....but for those members in Texas here's a JD870 with backhoe for sale from Gov. surplus.... John Deere 870. 1990 John Deer model#870 Tractor w/Front End Loader model#80 and Back Hoe model#8A Attachments. 3 cylind - Government Liquidation As with any auctions...

A while back, following a flush/cleaning of cooling system, I had a gravel'e whine coming from the water pump. I ordered a pump and all the other necessities(belt, gasket, hoses, etc.) to get the job done. Not the time of year for me to be caught without a tractor. Between the time I ordered...

Watching Netflix last night and though i spied a Yanmar in the Gotham series. Agree?

New tire kit from Hyoe installed! 25 gallons of rim guard in the rears. Definitely feel a difference in the ride, seems to get great traction. Does however act differently in 4wd. I'll admit that I am guilty of popping it into 4wd while in motion. Now...that's a pretty stiff shift with...

When one is adjusting the play in their clutch when, if ever, do you decide that it's time to replace the clutch. When you are maxed out on the clutch adjustment, and have no other symptoms of a bad clutch should I have the parts on hand at least? I just know my luck and will be at the bottom...

With new turf tires coming I thought it would be a good time to replace the right hand side brake shoes, which don't grab as well as the left even though they are just about maxed out. Steps: 1. Review Hoye's instructions on how to change brake pads. 2. Search this forum and review all the...

Ordered my new turf kit wheels from Hoye, and tires from local tire dealer today:cool2: Will be adding rim guard/beet juice from the get go. I've been kicking around putting a snowplow on the front of the tractor and have spied a old pickup snowplow already converted to a FEL version on...

Hopefully this makes some sense to you all....This doesn't seem to happen all the time but: Most often this occurs when I drive my 2210 forward down a incline, then stop and press in the clutch...switch to reverse and let out the clutch. You can hear and feel slop/play as the gears transition...

So my alternator went on my 2210. After considering switching to a alternator with the regulator built in, I went with the stock alternator, and picked up a new solid state regulator. I removed the old voltage regulator (had to drill out one of the screws cause I cant get stinking steering...

I've been sitting on this project all winter. I'm not sure when I'll actually start working on this as I know there is a good chance of some idle time once I get to tore apart. YM2210D purchased/new to me in January 2014. Changed all fluids/filters/cleaned hydro screen upon purchase...

I've had my YM2210D for about two months now. I religiously pull the decompression lever each time I start the tractor, then push it back in once started. My problem is that I can't sense any difference in the engine (sound, idle, smoke color) when the lever is pulled vs. the lever being...

New member hoping to get some good info and advice and hopefully I can give some too!