Search results

The thing looks new except for the heel wear on the floor area. Hours 867, Year, by serial # its a 96 turf tires look almost new, very clean. I paid 6500 for it. I got tired of fixing tractors and so the reason for this one

I get and install a new starter last week, life seams like it's getting good. I changed the plugs out today, messed with the thing a bit and it wouldn't start after it had fire up about 20 times or so. WHAT the fug, so I figured the solenoid was bad and changed it, absolutely nothing, did a...

The starter goes out. So I take it apart, knock all the rust out and bingo, it works, well for about 2 days. So I order and replace the starter, and she fires up like a dream. I fiddle with the linkage and the carb and low idle is about 450 and high (throttle all the way on to the where it...

I replaced the tank thinking this was the last big thing (well at least for now) and hooked it all back up. I turn on the gas and immediately flooded the carb (which is new, well it was new a month ago). Heck I don't think I understand it, the only thing I did was replaced the tank and it...

So going threw old post the common conclusion is either dirt in the needle valve or a float that is stuck or needs adjusting NEW carb and both the screen in the carb and fuel filter are good. Now I was messing around with the throttle and it's possible that I flooded the carb bad or is there...

I really don't think it should be this big of a pain. I changed out the steering box and when I went to put it all back together there is now clear path for the throttle rod. It came out really hard but I just figured it was rust and crud. I've got it back in (and because it was such a pain...

ATTACH=CONFIG]384286[/ATTACH] Soundguy, I hooked up my real disc to the tractor today, opened the inspection plate and this is what I saw. I'm guessing that stream coming down is a bad thing

What's so special about them that they are 150 higher than the other new carbs out there. And are they worth the extra bucks

If this is a double post please forgive me, I did this awhile back but it didn't seem to catch. I was changing out my glow plugs and the darn thing broke off flush with the block, has anyone else done this, if so how did you fix it. The tractor starts on the 1 plug but it's a long process...

Ok so right wrong or indifferent I've decided that I need to replace the steering box. The tractor is a 8n B. The existing steering box is an old model, the "spare" that came with the tractor that was rebuilt 3-4 years ago is a new model(I checked and the thing still is full of oil). I clamp...

I just took ownership of a old 8n that seems to be in overall pretty decent shape, well sort of Got it home and took if for a spin, I got about 3 blocks and it quit. That I'm pretty sure is crud in the gas tank blocking the flow, when I took the line apart and blew back into the tank, the...

I'm not even sure it's worth replacing at the moment, but I don't like fluid leaks. Seems to me that when I was a kid ALL the tractors leaked a little and we just lived with it. The pto seal is leaking (1/8-3/16 in a bottom of a paint can every other day). That seal is on the way and should...

Ok I'm not a mechanic but I'm not with out mechanical skills and a very little knowledge. Today when I went out to change the glow plugs (which don't screw in as far as the one's that were there) I noticed a thin line of ivory colored fluid leaking out around the pto shaft. I'm assuming that...

When I purchased my 1910 it came with an old tandem garden disc. 3 of 4 bearings are shot so after some online looking I came to the conclusion that I have a brinly. I email them and asked if they knew where I can get replacement parts, I got an email asking for a pic. She looked it up, sent...

grew up a farm boy in IA (oh so many years ago) so I thought I could fake my way threw this, I still think I can mostly I purchased a 1910 and it's a mess. Motor runs (need to use starter fluid to start it cold or even not warm) all 12 gears seam to catch and work 3 pt hitch works, pto seams to...