Search results

I have used my Stihl MS-261 C for many years now. It came with a 20” bar, 3/8 chain and has been the most reliable big wood saw I’ve ever owned. I cut all my firewood log rounds with it 3-4 cords a year, and log and buck up at least 20 trees a year off my place. The pro saw was $100-$150 more...

I set two blades as far apart as possible, and measured a factory land plane angle at 18 degrees, so I copied that. My 2 pieces if AR Steel are set 5/8” below the sides. Works great on my 1200’ gravel driveway.

They were acquired in N E Washington, near the Idaho and Canada border, from an area that was a series of mines, now towns. The cleats are formed and hollow, with openings on both ends, like drains, and do not look like they would last long, in rocky terrain, or digging. They look like...

I picked these up to put by an entry gate as they are very ornate. Looking for tractor pics, year, model or? Info on them. Approx 58” across, 6 spline drive, cleats are approximately 7” x 5”. Weigh at least 500 pounds

with the wiring in place, and encased in foam, I added the 2x4's, OSB walls, and caulked it all, including around the electrical boxes, for Zero air infiltration. Get a quality oil based primer, specific for OSB. I used a semi gloss to brighten up the room. trimmed the front wall the same way...

With 2x6' walls, the wiring is safely in the center of the wall and ceiling studs as the 2 1/4" sheeting nails cant reach it with OSB on the face also. I put in way too many outlets, but once the foam went in, nothing can be moved or changed. all wiring along the inside of the studs needs to be...

Anyone have a Piranha tooth bar and used it for scraping weeds off at the ground? these little suckers around here are like your finger at the base and a few feet tall, and very prickly. I just ordered a Piranha to help with the problem. Any opinions?

I just picked up a Kubota BX25D sub-compact. I also ordered the 60' snow blade for clearing my drive and access road. I have almost level ground here in N. Idaho, 300' winding drive and 2000' to main road. Roads to main are all good graded gravel. Here in N Idaho we get 5' of snow for the whole...

I am waiting for delivery on my BX25D. I ordered the 60" snow blade to plow a 300' gravel driveway, and approx 2000' gravel road to the street. Here in N. Idaho we probably wont get more than 12"s a day, and the driveway is just about flat level ground. How does this little tractor do traction...