Search results

Im looking for the black frame pictured. With our without springs. if you have one let me know- saleenlimited@yahoo.com thanks

So i just went an bought a 54" snowblower for my 2320 but i keep thinking how i cant then put the loader on quick if i need it without pulling the quick hitch off. I was thinking, the ONLY thing preventing the install of both at the same time is the "stand" on the loader correct?? or am I...

anyone with a 2320 (I also think 2520, 2720, and 4110, 4115).... with a front quick attach.... could you provide a couple measurements please?? looking for a measurement between the center of the lower cross tube to the center of the upper pin. also the internal width and the length...

I have read that the 2320 needs the front universal greased. I have been in there a few times and have bought every grease fitting adapter i could find and I still can not grease the **** thing..... what are you guys using to get in and grease it???!!!!! thanks a bunch

I was talking to my local dealer thru email trying to figure out what i need to order. A guy down the road from me is selling a 47" snowblower off a 455 that i would like to mount on my 2320. This blower comes with everything to mount to a 445. Im thinking the front upstop and small driveshaft...

is the 2320 and 2520 quickattach front hitch the same? is it also the same as the 4110? thanks

anyone have any input on a 425, 445 or 455 quickhitch fitting a 2320? Im sure its not a bolt on but can it be modified to fit? I ask because a guy down the street from me is setting a 425, 445 or 455 quickhitch and 47" snowblower setup. I guess i could always just buy a 2320 quickhitch and sell...

My 345 hydro mower will only move half speed.... not sure where to start. Checked fluid level and thats fine. Should i do a filter and fluid change?

Looking to purchase a snow blower for my 2320.... should i get a 47" or 54"??? One dealer keep telling me to buy the 54" so its wider then my tracks, but the other dealer is telling me that the 54" (i think 2nd stage) is plastic and is prone to breaking, where the 47" is a better unit..... If...

looking to buy a rear bagger for my 2320.... if you are selling one, please let me know- saleenlimited@yahoo.com thanks!

Looking for a snow blower for a JD 2320. Im located in New England. saleenlimited@yahoo.com thanks

Anyone have a clam shell grass collector on theie 2305/2320/2520??? something off a 318 322 420 430, etc... that runs the blower off the rear pto?? Im looking at an old one im thinking about retrofitting to my 2320 3pt and run the blower off the rear pto. any input on this? anyone running a...

Looking for a grass collection pickup for my 2320 please email me at saleenlimited@yahoo.com thanks

Does anyone know if a 54C/62C flowhead fit a 54D/62D Deck?? The guy behind the counter at JD cant tell me.....

Looking for a flow head for a 62D deck for my 2320 anyone know if a 54C/62C flowhead will fit? looking at the john deere site, im confused.. lol

anyone use the agway 4 stage lawn care? Been thinking about trying it out and getting my lawn looking greener. I have about 50,000 sqft of lawn. My only problem is watering the lawn since i have a decent sized area.

i found a local 4100 47" snowblower for sale and comes with the quick tatch kit.. wondering if this would fit my 2320??? i was looking at this-- John Deere - Parts Catalog and it looks like it does?? here is the blower- any help would be great- thanks

Looking for a good used 47" john deere 47" snowblower... will be for a 2320. thanks saleenlimited@yahoo.com

wondering if the quickhitch for a 2305 and 2320 are interchangeable? Looking at a used snowblower and mount from a 2305 and wondering if it will bolt directly onto my 2320? thanks

I have been looking at adding a grass collection setup on my 2320 JD with a 62D deck. I like the idea of a 3pt hitch clam shell style plastic grass collector and have been thinking of what i can use to make such a setup... then i though of this.... Paint it black and stick it on the back of...

Looking to put a meyers plow on my 2320 JD bucket arms. I want to keep the up and down, and curl function and add a side to side tilt. I would like to run this all on my factory bucket control stick so im looking to put a converter valve in. I was looking at this unit - Prince Double Selector...

I was asking a while back about the difference in a 2320 and 2520 62D deck. I ended up buying a 62D-2 2520 deck for my 2320 just to find out it is different. Seems i can find 62D-2 decks used for sale all over the place but no 62D-1 decks. Anyways.. I got the deck mounted and working today...

So.. after waiting for over a month my dealer tells me my item came in but they cant find it... So they over nighted another one and dropped it off. Dealer said i needed two different things to mount my MMM on my 2320.... this is what they ordered me..... Dont I only need the parts in the...

I was wondering if some of you would help me out... looking for pictures of the MMM arms mounted under your tractors... looking for mechanical lifts only. I really need to see what the difference in the 2320 and 2520 really are. thanks a bunch!!

I was wondering... is there a difference between a 2520 62D and 2320 62D mower deck? Just the deck itself? My dealer is trying to tell me there is. He says a 62D deck off a 2520 will not fit a 2320..... anyone have any input on this?

Will be installing a 62D mower deck on my 2320 shortly and need a manual lift mower kit. Anyone happen to have a part number on the entire kit? I looked on the JD website and it lists everything separate... not a complete kit that i can find. thanks

Purchased my 2320 new in jan 07. Never had a problem with it till this morning. Ran the tractor all day yesterday. Parked it, and went to start it today and all i hear is a starter solenoid clicking. Put a charger on the battery all day, and nothing. After charging the battery only has 11.18 v...

Been thinking of building a grass vac... any problems why i couldnt use something like this for the pickup? Just use the engine and housing mounted on the back of my tractor. would the impeller need to be changed or would it work as is?

In my other post i was talking about picking up a 62D mower deck for my 2320. I found a guy selling a used bagging system off his 2305. LVB24897 Bagging system, the LVB24957 Chute, and the BM22697 (BM21495) Powerflow blower Im pretty sure the bagging system is the same for all the 2000...

I purchased my 2320 new in 2008. I also purchased a 60" woods (painted JD green) rear mount finishing mower. Loved the mower in the beginning for several reasons, shoots the cut grass out the back, not to the side, and its a quick and easy hookup. Things i dont like about it is, pain to store...

I ordered a brand new 2320 in Jan 07. Since then I have 123hrs on it. I use it basically for mowing the lawn and plowing my driveway in the winter, and a little bucket work from time to time. The tractor is always garaged when not in use. After this past winter i noticed all my hydraulic...

After seeing some pics of the homemade cab in the built it yourself section, has me thinking of a new summer project. I was wondering though about using a small cab heater on a 2320. I know it has a small alt and a heater draws alot of power, so i was wondering if the 2320 could handle it or...

I am looking into either a plow or snowblower for my 2320. I want either going o make or purchase a curtis plow for my FEL with quick connects so i could go back and forth between my blade and bucket for the winter.... then i got thinking of maybe getting a snowblower instead... my main concern...

I have a 2320 and am thinking of installing a TuffTop on it. i was just wondering if anyone had any pics of a Tufftop on a simialr machine?? also, i was wondering if anyone had a cab for there tractor like the curtis and if so please post pics. thanks

my father has a 8ft curtis plow that he bought for his tractor 10 or more years ago and has used one. I was thinking of taking a plasma cutter and cutting it to 5ft to put the my 200cx FEL JD2320.... According to the curtis site their 8 ft plow weights 585lbs! Their 5ft plow weights 470lbs...

I am looking into the WR Long selector valve kit to add the tilt side to side on a FEL snow plow. If i go with this kit, is the JD power beyond kit needed to make it function?

I know an atv snowblade is pretty light duty but I have a next to new 60" blade off my atv that is just sitting and i would like to put a blade on my tractor FEL for the tilt side to side to make plowing my paved driveway a little faster. My tractor is a 2320 so its roughly 1000lbs more then my...

I am looking into a 60" rear discharge 3 pt hitch mower with my tractor thinking about the woods Heritage RD60. wondering if anyone is using this mower and how you like it?

I am purchasing a new 2320 in the next several days. I was wondering if a block heater is needed for extremely cold weather. I live in CT and plan on using this for moving snow and it can get very cold out. All of my older tractors and trucks have always had to be plugged in for extreme cold...

I was wondering if anyone has this wood splitter from Northern? NorthStar 3-Point Horizontal Log Splitter |Log Splitters | Northern Tool + Equipment If so how does it work? It says its recommended for a 11gpm tractor..... This would be on a JD2320 thats only rated for 5.6 or so gpm.....

I was wondering if anyone makes a FRONT mounted mower for a JD tractor like the 2320/2520?

Are there any older JD snowblowers/throws that will fit the newer tractors like the 2320/2520? thanks

am I reading the jd website correct? I can not use the JD front and rear aux lights together.... just one or the other? maybe I am missing something....

I was talking to a dealer yesterday about pallet forks... he showed me the frontier pallet forks Models: AL1240F John Deere Ag - Frontier Equipment Features for Pallet Forks he said these would work on a 2320 with a 200cx loader. I explainned to him that i didnt see them on the JD website and...

What exactly is a box blade used for? Grading? I am looking to do some grading on my back yard, what the best item to us or combo of items? box blade? rear blade? FEL? york rake? thanks

I was wondering what the JD 2320 is compaired to, a Kubota BX or B? I am guessing the B series and the JD 2305 is compared to a BX?

I really like the JD 2320 and was wondering, is this compared to a BX kubota or is it the JD 2305 thats more like a BX. what would you compare a Kioti LB1914 with? thanks

I grew up farming and have always been around john deeres. I just recently purchased my own home on 3 acres of land, 1/2 lawn, 1/2 woods. I have been thinking of purchasing a compact tractor to do the following- move firewood, rocks, mulch, dirt, snow, grade, mow,etc. My neighbor buys and...

My next door neighbor buy and sells kubota tractors as a hobbie.... All of his tractors are in great shape and he always has at least 15 at any one time. He has a B2150 that he is selling... it was one of his own personal tractors that he is now selling. He has had it for over 2 years and has...

My neighbor is into buying and selling small kubota tractors as a hobbie. At any one time he has 14+ tactors.... I have been thinking about purchasing a tractor and selling my 4x4 atv (which i use to plow snow). One of the tractors he has for sale is a B6200 4x4 with a bucket. I am not sure at...