Search results

Gonna check pilot bore relative to flywheel OD. I have checked run-out on flywheel and trans. output shaft. and it was fine. What you're saying makes sense.

I have a little Branson 2810 (28hp) which I bought new in 2002. I really like it but it has given me (so far)an unsolvable clutch issue. I have posted this issue in the Branson thread several times over the years as I have tried resolving the it. I have talked to various dealers also. I am...

That's a great idea! I'll give them a call. Thanks!

Anyone know a good part number for glow plugs on a 2810?

Has anyone had luck cross referencing the part number for their Branson 2810 glow plugs?

First pick was three railroad ties at the same time...and not having to get off the tractor was so cool!

Thanks! I drew up the grapple on Sketchup, then converted the drawing (of pieces I wanted cut out) into a .DXF file and had a buddy with a plasma table burn them out for me. Some of the steel was scraps I had laying around. I guess I spent $500 or $600 on steel, DOM tubing, cylinders, hoses...

Thank you! 🙂

Fun build and a very handy tool for sure. I will probably eventually remove one and move the other to the center of the bucket, I don't think having tandem grapples is worth the extra weight for how I use it (most of the time) .

Very nice setup! I'm just a little jealous! 🤓

Has anyone else out there had problems with their clutch on a 2810? (2002 vintage)

It appears that the bad o-ring on the no. 3 plunger (of the injection pump) was preventing the fuel "pulse" from achieving proper pressure? Perhaps it was allowing a bit of air to become entrained in the line? I have no previous injection pump/injector experience, so I can't say for sure. I can...

I found the culprit! It ended up being rotten o-rings on the discharge ports of the injection pump. Thanks for the input, much appreciated! I am thanking the Lord it was not a serious, expensive issue. 🙂

Is it possible to disassemble and clean these type of injectors without specialized equipment?...and not mess them up?

I've got a little Branson 2810 (3 cylinder, 28hp) I purchased new about 20+ years ago, never had any engine issues...until today. She wouldn't fire when turning over (It ran fine yesterday). Has about 800 hrs on it. Shut-off valve is functional, I finally coaxed it into starting with help from a...

Amazon and ebay currently have lots of cheap directional control valves available. They run half to a third the cost of Prince, Wolverine, Magister, etc but they look identical and are likely the same valves without the branding. Has anyone purchased any of these and been able to find the...

Good morning, does anybody know of an on-line source for Farm King snowblower parts? Specifically I'm looking for replacement bevel gears (open gear box) model 7400. I've been looking but not had much luck. I figure I better get them ordered now or I won't remember until the snow flies again...

A buddy gave me an old Meyer snow plow that was pretty (very) beat up and I was able to rebuild it and fab up a mount which would work with my little Branson quick attach on the FEL. I added remotes to the front for the angle. I found where some other guys where leaving the original pivot design...

I know this is an old thread, but I did not follow up with what I found and how I was able to resolve it all. This may be helpful to someone else. The clutch plate center splined (hub) section stripped out. looked just like it had been machined, nice & smooth! I'm told this earlier model of...

I have a Branson 2810 (2001 model with 400hrs.) and while snow-blowing tonight something failed. I suspect it is the clutch, but have to figure out how to get it into my shop. The noise it made has me scared that possibly the failure is worse:eek: It made a "loud...rubbing-screeching" sound and...

Hi guys, Has anyone had any luck finding replacement glow plugs for their 2810, that are less than $45.00 ea.?? My 2810 is a 2001 model and I wonder if the glow plugs might be interchangable with some others models? Thanks

Hello, The internet is an awesome resource. I have accessed various forums to help me solve many "challenges", from broken washer & dryer's to a thrown caterpillar track. I'm on here now because my little Branson 2810 has given me a few problems. I found a good thread on it here and thought it...