Search results

The warranty is fully transferable. Just go to your nearest dealer and fill out a 1 page warranty transfer sheet. Easy as that.

Relocate the ignition switch to the right side of the main console area. There should be enough wire, there was on mine. No more chance of "bumping" the key with your knee.

I am starting to really like the aquisition of Kukje/Branson by TYM. Videos being put out by the manafacturer, a website where you can download manuals and order parts. Who would have thought these things could be done!!! Best part is, they are currently keeping the Branson models in the lineup...

I would go this route if I had a 15 series: https://www.palletforks.com/skid-steers/bucket-and-accessories/stump-bucket-for-skid-steer-quick-attach/124102.html I have a 5835R and went this route and it is all I can handle...

I have 200 hours on my 5835R. The tractor has been reliable with the only exception being the transmission control module needed to be "reflashed" due to shifting real hard. The weight with loaded rears and front loader is 7000 lbs. Plenty of power. Loader rated for 3400 lbs lift at the pins...

I just tried it, working fine here.

The tractor should run fine if you gut the DPF. However, I believe you will get the DPF light flashing at you from the dash. The newer (2020+) tractors don't allow for you to simply unplug the DPF ECM like the older ones do. If you unplug it you lose your tach and temp gauges. If you end up...

Been there myself.....

This may have been addressed previously but here is a link to an online Branson parts App. You will download the app to your desktop and log in from there. You will have to sign up with an email address and password. It appears legit as I have compared part numbers to my parts manual and all...

Thought I would share a couple of situations I ran into with my 5835R that may help someone else in the future: Performed my first regen today after getting notice on the dash that it was due (110 hours on clock). Put the the shuttle and range selector in Neutral, set emergency brake, revved...

I would base my decision on which dealer I felt would provide the best support. They are both fine machines.

I bought a 2515H in January 2021. I put 180 hours on it in 8 months. I realized I had the wrong size tractor when I attempted to run a 5 foot tiller in the tough Georgia clay and the PTO HP deficiency raised its ugly head. It is possible that running 4 foot implements would have yielded a...

My 2515H pedals require significantly more effort than my buddies JD 4044M pedals do. The JD pedals are almost effortless.

I would say $23500 for a 4815H is a smoking deal being that the 2515H is $18995 on a national promotion sale until the end of this month. Local dealer said that if Branson doesn't renew the promotional price on the 2515H then it will go to $20995

Buy it...won't find one cheaper and will possibly profit when you are done with it. It is almost unbelievable that the hoe isn't full of slop and the pins are "tight front and back". The current owner is a friend as well, this is a no brainer.

Imagine if the Branson website had a parts section where a customer could purchase filters and the like............What a concept!

2515H w/ Hoe on 16' trailer. It trailers really nice at 65mph. I was concerned about weight distribution but it works. 20' 10k trailer would be ideal.

Tractor 3000 lbs Loader 1000 lbs BH150 1000 lbs I estimate 5k for a 2515w/Hoe and no loaded tires. The dealers sell 7k dual axle trailers with these all the time but I believe you are at the ragged edge of safety with that setup. Can it be done, it is done all the time.

Comparison chart for tractors in your sights.

There are a bunch of 2505 owners on Facebook in the Branson Compact Tractor Owners Group Public group · 2.8K members

Both new Bransons I have owned had this problem with tight rops pins. I grind the pin on the bench grinder and it's fixed.

Great looking tractor my friend. For the hooks get these, they ship in a day: https://www.amazon.com/gp/product/B07W7W5SX9/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 For the toothbar, received it in 4 days after ordering: 66" Bolt on Tooth Bar - Fits 60" to 66" Bucket | Express Steel Inc...

Is there any width gained by flipping rear tires on 2515?

Take a look at these 2 "spec" sheets on the BH 150 and you'll see why I am always suspicious of Branson specs. The spec sheet that is plain white/black is taken from the BH 150 owners manual that I got last Friday with the purchase of the tractor/loader/backhoe. The other spec sheet with the...

I have found that wide open on the hand throttle yields a max rpm of 2550. Does that seem correct? Redline starts at 3100 rpms. Is there any negative to adjusting max rpm to 2800 or so. I see where the adjuster is, opposite of the idle adjuster. However it doesn't appear to be a simple turning...

I picked up a 2515H with BH150 Backhoe and factory diverter valve today. I bought a 4520R new back in 2015 and sold it last year. The 4520R sold me on Branson being built like a tank and being simple designs. When I first saw a 2515 I was blown away by the size of the tractor with a 25 hp...

OP, I have owned a 4520R Branson for 3 years so I feel that I can speak to their quality. My tractor is a shuttle shift so that is what I know. The tractors are built stout as others have pointed out and you get a lot of features included with the base package. The most frustrating aspect of...

I have a new oil leak that sprung up today. It is leaking from the top of the steering column between the steering wheel and the top of the column, Weird place to develop an oil leak. Is anyone familiar with what seal may have let go? I am hoping that the power steering valve isn't taking a...

Sorry it took me so long to follow up. I got the 48" MTL and I am happy with it so far. Quick attach fit nice and snug. At 350 lbs I have plenty of lift available. My tractor is 47 HP and around 5000 lbs with loaded tires and rear ballast. Seems well built and has grease fittings at all key areas.

Loader arm install, snug fit with about 1/8 " clearance with hood.

I bought this one MTL Attachments Compact Tractor Skid Steer 48 Root Rake Grapple Bucket-Free Ship | eBay for $890 shipped to my office. I have been happy with it. It weighs approx. 350 lbs which leaves a good bit of lift left on my BL25R Loader. I paired it with the Ultimate Diverter Valve kit...

From the service manual: "The engine number is stamped on the cylinder block and is specified on the decal which is attached to the cylinder block on the left side of the engine. Also, the decal indicating the engine model and standards is attached on the top of the engine cylinder head cover".

Finished replacing the original loader cylinders with the Mighty brand ones I got off Amazon. Total investment with fittings was $225.00 and that covered both sides. Install went pretty smooth. Only thing that required some massaging was the rod ends were to wide and needed an 1/8 to a 1/4 inch...

I have a badly leaking lift cylinder so instead of rebuilding I went ahead and ordered 2 of these https://www.amazon.com/Mighty-Double-Acting-Hydraulic-Cylinder/dp/B009PJELO8/ref=sr_1_1?ie=UTF8&qid=1548715708&sr=8-1&keywords=mighty+2x16+cylinder and some fittings to replace the originals. My...

Tractor has 100 hours on it (2 years old) and I am wondering if there is any action I need to take with emptying/cleaning the fuel filter. Can someone walk me through the correct process? Main concern is getting air in the system and having an issue afterwards. Might be overthinking it but...

Getting ready to change out hydraulic fluid and filter. Anyone familiar with whether or not their is a screen that needs to be flushed out and the location/process for accessing it? Owners manual does not address. Thanks

I received the ES323R Tie Rods that I ordered off of Ebay. Everything was correct with the exception of the part that fits into the spindle. It is tapered while the original appears to be consistent in width throughout, also I had to use some washers to act as spacers in order to snug it down...

Thank you to DoubleO and Oldstuf for their information. Oldstuf's post can be found here: www.tractorbynet.com/forums/terramite/380486-1998-t5c-frt-wheel-bearing.html I completed the bearing job in about 6 hours or so. I can confirm that on my machine (2005) the bearings are: Outer Bearing...

Anyone have a part # for front inner/outer wheel bearings/races and seals? Thank You

I need some assistance with getting part #'s for replacement tie rod ends on a 2005 T5C. I searched and only found part #'s for older models. Anyone have any info? Pics of my current tie rod ends are below. Thank You

Built 55 Gallon Drum Ballast for the Branson. Took 12 80lb bags of sakrete.

I have owned this machine for a couple of weeks and noticed this issue pretty quickly into operating it. The drift in the boom is intermittent and occurs both when the machine is cold or hot. It may happen twice in 2 or three hours of use. I have attached a video so you all can see for...

I just purchased a 2005 T5C a few weeks back and decided to change out the hydraulic system oil. Unless I am missing something, there is not a drain plug/petcock anywhere on the hydraulic reservoir. I ended up removing the 3/4" hose on the lower side of the tank and drained it that way. Lifted...

Received and installed my Piranha Bar. Very pleased with fit and finish so far. Inside bucket width was 67.5 and the tabs on the Piranha were 67.25 so it fit nicely. Install literally took 30 minutes and the bar only weighed 50 lbs. I'll take some action shots this weekend and report back on...

Looking for cross references for engine oil and hydraulic filters. Engine Oil Filter # EA00001160B Hydraulic Filter # TA00025525A I went to O'Reilly's and NAPA and found out the following: O'Reilly's only came up with an oil filter cross reference: WIX 51334, brought home and it was...

Did some work on pine trees today. Found the relief valve on the loader pretty quickly! After putting the tractor in the garage for the night I attempted to remove the nuts that hold the tire/outer rim on in order to gain some width on the back for next time out. Quickly realized that when...

After much research and several test drives of other brands I ended up purchasing a 2016 Branson 4520R today. I also picked up a 6' bush hog, 6' box blade and a set of ssqa pallet forks. I didn't find much in the way of reviews on this particular tractor on the web so I intend on documenting...

New to tractors and I wanted to get some experienced folks opinions. I have the opportunity to purchase a 2008 model 2816 with loader for $11000 cash. The machine is one owner with 107 hours on it. Gear transmission, R4 tires. Any thoughts, I am going to look at it tomorrow.

My name is Jon and I wanted to introduce myself. I recently purchased a new (to me) home with 7 acres of land here in Cumming, GA. I quickly realized that a tractor/loader or skid steer would be an invaluable tool around the place. I have budgeted 10K and am actively searching for my first...