Search results

Been awhile since i logged on so I figured I'd put my current Ford Tractor pic's up. I just picked up the 4000 this week. It ran and drove good and told myself i wouldn't do as i usually do and right away tear into it and fix all the years of neglect and bad repair's....which lasted about one...

Sorry to take so long to answer sixdogs but, I used Gloss white same as the front and rear Rim's and Grill to tie it all together. Here's my latest restore a 16' 8-Ton Kory wagon. My father housed tobacco on this wagon many years ago it belonged to a friend a few miles away. He put a new floor...

Haven't posted on this thread in a while been busy with cattle, hay and work. I have been working on my Farmall 656 haven't had the chance to work on any implements any one else been busy working on there equipment??

So I figured y'all might enjoy a post about my new to me 1952 Case VAC project. So about 2 months ago i Found a Case tractor for sale on Facebook for $750 dollar's. The tractor looked decent in the pic. I called him up and asked for more info He said "We used it last year but, it needs a good...

So i finally found a truck i wanted to take the load off my 1 ton Dodge dually. Got a deal to good to pass up missed a few other deals cause my bank is run by idiots(another story) lol But I found this one right up the road from me at a farm equipment dealer. It had a Grain-o-vator on it. He...

Here's my 12ft #37 McCormick Disk it needs a new axle and some cast bearing housings got all that ordered some used but, i believe it will make a great disk. Here's the 10ft #37 McCormick Disk just needs new weight pan's, tires, 2 scrapers and paint and its ready to roll. Here's my...

Howdy all sorry i haven't posted in awhile been crazy busy at work. Glad to see the post is still in use and keep up the post and photos glad to to them. Here's what I've done here of late I got my IH 540 Plow Decals done, Bought a Farmall 656, 2 McCormick #37 Disk 1 12ft and 1 10ft and a Walton...

Thanks all Still going through the tractor trying to fix all the little issues i can find. I had to fix a bad wiring job lots of live wires just dangling around and no lights worked. Got those fixed gave it a good Pressure wash and then hand wash looks even better. Got the air filter, oil filter...

Howdy folks well i have a funny/goofy event happen yesterday. Anyways yesterday i stumbled upon a 1966 Farmall 656 for sale a few miles down the road. The owner placed a For sale paper at the local feed store said it was a IH 656 Hydro with Bush hog and bale spear. So after a quick call i ran by...

Howdy all so I took my wagon on its first long tractor drive it did great but, it rained on the passengers some. So I started on putting a top on it just need the tarp and it's done. Also got my New Holland twin-d-power painted decals are begin made as well as my IH plow decals but, I did get me...

Thanks and i will get a video when i get to use the plow not sure when... and Haha yeah i wanted the same brand set but, there was a $100 price difference in the matching vs. no-Matching set lol then again i've only got $700 in everything. I do have buy a set for my 540 IH plow too might swap to...

Thanks to some great weather i got my Ford 142 16" 4 btm plow nearly finished. I bought new hydraulic hoses, New rims, new tires, and got it all painted. Now just gotta go grab some Decal's on payday lol Before: After:

I found a few items at a local farm equipment salvage yard but, there was a few items for sale on eBay last i checked. Estate auctions seem to be the best place to find part planter's. For the disc I know Agni-supply has the axle's and blades for the but, haven't found much else for the Disc...

Awesome work guys keep those post coming!! Here's my Latest Job A ford 710 Utility Blade i wasn't able to do a complete restore because someone had welded it up fixed and i think its a lot more solid now. So i left it alone and just grind down the rough spot's. Cleaned up the weld's, sanded...

Here's the only pic i have of it mostly done had to wait for the new belt to come in to put the belt shield on. I still gotta make a ford grassboard and add the new decal's as well but, it's 95% done now. and i just use Majic paint from TSC and Hand brush everything. I plan on using them all the...

Here's my second restore i hope to use this year to plant my vegtable's in the garden lol a Holland Transplanter I picked up for $30 no one else wanted it said it was scrap. Ohh how wrong they were i love the way it turned out. Before With out New Decal's and set of row marker's After the...

I got my IH 540 4 btm 14" plow in the shop this week. I still need new tires,a bolt to for the depth wheel, gotta order shins, points and new decals but, I like how it turned out so far.

Ford 501 Sickle Mower(Still gotta build a grass board) Before After New item's i just bought to restore hope to get started soon. New Holland Twin-O-Power two rake Dolly IH 540 4-14 Semi-Mount Mold Board Plow Ford Rotary Hoe Ford 710 Grader Blade

New Holland 256 Roll-a-Bar Rake Before After Ford 201 8.5ft Disc (Sill trying to find a better A frame piece due to bad prev. owner weld up.) Before After

Howdy all thought i would start a new thread about my love of restoring old Farm implement's Which i hope i put in the right place if not please move. Some have seen my other works but, thought i should put these in there correct Forum category. Here's my past, present and future project's and...

Hello again all long time with out a check in sorry bout that. So i been busy working on my equipment between the freezing cold and the snow but, got a few thing's done. I bought a New Holland Model 14 Conestoga wagon. Took the Flat off sanded, painted, new decal's on the running gear. Also...

Got my Ford 510 Hay Crimper in the shop and got the new mid-pipe on. Got it welded up, it took awhile to cut the old one out and grind down the weld but, the new pipe is stronger. Also got the old froze stiff chain off and got it all in primer it turns with a finger all the way through. Hope to...

Howdy all my 1971 Ford 8000 has two factory Block heaters and they both went bad so i ordered a new aftermarket one. I drained the antifreeze, removed the old one and cleaned and scraped away the old residue even took some scuff paper and cleaned it up. Put the new one in and Got it good and...

Here's a Boom pole i bought that someone had made at home it's alot stronger then any on the market they used 4" in 1/4 thick weld casing. It picked up my disc on the end loop with ease. best $75 i ever spent plus paint and decals lol

Howdy again so i finally got my Holland transplanter all done but a couple spots need some touch up paint. Cant believe how well it turned out the new decals really made it pop. Also got my Ford 510 Hay Crimper in the shop and welded the new pipe in hope to have it put back together and painted...

So over the weekend i picked up a few more items at an estate auction. One piece i've been searching for many years to find a 1965 Ford 510 hay crimper/Conditioner. It was in decent shape well worth the $40 i gave. Also bought a nearly perfect Ford 501 Sickle mower had all the items that...

Finally got my Ford 309 Corn planter disassembled, fixed, reassembled, sanded, and painted today just gotta wait till its above freezing to put the new Decals on haha lol !!

Update: 10/17/2015 Howdy all so it's been a month figured i'd post a post some pic's of my progress so far We had to extend the garage to fit in the new piece's and the tractor plan on another 20ft addition to the side and a 28x28 garage aswell but, money is short with the holiday's on the...

Update: 9/21/2015 Hello again all I picked up a few more item's the other day a John Deere 24T baler and a 256 New Holland Rake both in great shape for $900 total got offered $2900 when i got home...and a few more offers since from others just can't let em go just yet haha crazy i guess and got...

Howdy, I can't speak for the long lasting of this paint but, i as well have been painting my new to me implement's. I bought Majic Brand From TSC they had the exact color's i wanted. Ford Red, Blue, Gray, New holland red and yellow and John Deere green, yellow. I first rinsed the implements of...

Howdy all, I picked up a used Boom pole a little while back and decided to paint it today. It was ford blue to start with so i went back with that color. I was hoping someone might know the brand it looks way to well done to be homemade. Its 4 inch round steel and very heavy. I also added Ford...

Update 9/9/2015: Hello again all so we drained the PTO nasty thin junk and replaced it with some new temp hydro fluid to wash it out persay. I found out napa carries the correct mineral 90w oil so will pick up a 5 gal barrel to replace. The PTO does much better it dosent free spin any more and...

I hope this is the right forum to post in but, Ive been looking for a front end loader for my Ford 8000. I have found two loaders one is a koyker K5 off a 7710 ford with full mounting kit next is a 7411 Ford front loader with a mounting kit off a 8240. Both state they will easily fit large older...

Thanks all and yeah it was there premium hydro fluid for tractors. I plan on changing the fluids and filters soon. Just did filters for the moment to catch the big stuff next paycheck i'll change everything. I gotta replace the points on the 101 or grind them. I dont like how the new points are...

Thanks all!! So some back history on the tractor it belonged to three brothers who were retiring from farming. They had bought all cabbed tractors and this one was put on reserve per say. It spent most it's time pulling a 22' foot disc and a large no till drill. It sat in the barn for 3 year's...

So today i went and bought my first personal tractor. Having grown up on a farm in my earlier year's and as i've said in my welcome post in the forum i wanted to dive back in to farming. So i caught wind of a great deal on a 1970 Ford 8000 in great shape. The tractor had 5950 hrs with a total...

Howdy folk's, So i just found this site seems to be a great find so far...To start My name is Cody i live in Hart county KY I'm 25 and work full time at a water treatment plant. So a little history about myself/Family I'm trying to get back into farming "My family farmed for 5 generation's but...

Howdy Folks, So I just found this site hope ya'll may be of some help. I went to look at a 1030 Comfort King tractor. The tractor was not as the ad said but, it did have decent tire's, strong clutch, it ran really great. But the 3pt "Just got weaker and weaker now doesn't work" according to him...