Search results

Has anyone replaced the Oil vaptor seperator for the breather on there New Holland tractor? I have listed the part number above. My owner's manual does not even mention replacing it. The New Holland website under parts says to replace it every 300 hrs. If you have replaced, how do you remove the...

Bought new inner and outer air filters for it yesterday. Even though my filters are very clean it appeared that I had a tiny amount of dust past the air filters on the clean side of the intake. These filters are very cheaply made. The canister is made by Donaldson which is well known in the air...

Has anyone inspected there air intake behind the air filters and noticed a super fine light dust inside the hoses? I notice it on mine. I never really noticed it on any of my other equipment but was more concerned about mating surfaces being clean. I see no damage to either filters. All clamps...

I stopped and looked at a new 5045E today just to see what was different than my 5055E. First I will say its basically the same tractor just more refined. The operator station area I do like better but under the floor tin is the same tractor as before. I like how they done the floor now because...

My dad is thinking about buying a sub compact tractor in near future. He is looking at MF, Kubota, and Deere. What is the main differences between these two? I assume the E is more of an Economy model and the R is more fancy. I know there is 2hp difference. Where is the 100lbs. of weight...

I guess everyone has there own idea what an old tractor is. I am talking about 25 years old and older. We still have a John Deere 2155 and a Massey Ferguson 165 Diesel on the farms. I like the new stuff but I prefer the old. Just seems like allot more raw power and pulls allot better than the...

Has anyone noticed on there tractor the engine Rpm's increase maybe a couple hundred RPM's and stay there on its own. I noticed if I start my tractor every once and a great while, let it idle for a couple minutes, and then maybe increase the RPMS to 1200 that when I put it in gear and start to...

I noticed in the center of the bell housing there is a bolt that more looks like a drain plug. Also there is not paint on the casting around it. This appears to have been done on purpose by Deere. My manual does not mention it anywhere. I know most 2wd tractors have the cotter key there. I saw...

I was just wondering where the temperature gauge runs at on your machine when running it hard? Mine seems to run to the right of the half way mark around 60 or 65%.

Looks like it could be handy. John Deere 4R Series vs. Kubota L6060 - Attachability - YouTube

Is there anyone on here that lives in an area with allot of New Holland Utility and Compact size tractors around being sold and used? Around here all of the New Holland dealers that have been blue even back to the old Ford days are now pushing Kubota. This really ticks me off but I must say...

The mechanic came out and looked at my tractor today. He pressure tested the system with tractor not running and later with the tractor running. He found another slight hose leak below the waterpump. This makes the 3rd and forth time the coolant hoses have been tightned on this tractor...

I have a TN70 that has the 8x8 non syncro transmission with the manual forward/reverse shifter on the left. The tractor has very,very low hours. I notice that when I push the clutch in and want to move the left shifter to forward or reverse at times it grinds especially if the rpms are up. Now...

I have a TN70 that has the 8x8 non syncro transmission with the manual forward/reverse shifter on the left. The tractor has very,very low hours. I notice that when I push the clutch in and want to move the left shifter to forward or reverse at times it grinds especially if the rpms are up. Now...

I have had several radiator hoses I have had to tighten up on my new tractor that I found leaking in the first 18 hrs of owning. I noticed the other day the inside of the radiator neck is made different than any other type of radiator I have seen before. Inside radiator in the center about 2...

I would like to add a canopy to my 5055e this year or next. Can anyone tell me of a good aftermarket one that is quite and durable? If I cannot fine a good one I will get one from Deere even though I don't like the price. My 2155 has a factory canopy that has insulation under the bottom side...

Can anyone tell me how much to adjust the clutch pedel on a TN70 with the mechanical Shuttle forward/reverse with the non syncronized A/B 8x8 transmission. I am just wanting to check it.

What is the clutch nut that operates the deck suppose to be torqued at that mounts to the engine crankshaft??

I noticed the clamp that attaches the muffler to the turbo arear appears to be blowing out some black soot on my plastic hood. I checked the clamp and it was a little loose so I tightned it. It still blows some soot. Anyone elses do it? If so, how did you fix? Im worried about it getting the...

I have a new Deere 5055E with maybe six hours at most. I noticed today the blow by tube comes out between front of engine and water pump fan and does not extend down to bottom of tractor. I noticed that I'm getting a little blow by and the fan is slinging it up on the inside of the hood a...

Im not sure how many of you get to run the bigger machines. I have run the big stuff as well as the small machines. I thought this would be interesting to some of you what some of the good old iron is bringing. I was in High School when the 4960 came out and it was a nice machine. I have allot...

I have not got to use my tractor much since the dead of winter. I did engage the 4wd but did not notice any dash light showing its engaged. Is this normal to have no four wheel drive engaged light??

I just thought I would post a pic of my old John Deere 2155 tractor. It has 3070 original hours. I would like to see some pics of other peoples tractors and it does not have to be Deere brand. I have been around about all the major brands over the years.

Well I thought I would post a few pics of my new John Deere 5055E still on dealers lot and ready to be cleaned up before delivery. I received it the week of Thanksgiving. I had a block heater added to it before delivery. I plan on adding a canopy and either a front weight bracket or guard. Sorry...

In your areas have prices on Bush Hogging dropped? Around here people want it done but they wait to call until it is 4' tall or more and in some cases has set for years and small saplings are growing on it. I have around a 60hp tractor and 6' Bush Hog. People in the area could make better money...

What color paint matches best with the King Cutter color? I bought a new 6' tiller and wanted to do some touch up of the paint before spring gets here. Also, what are you guys charging per garden to till up with a rear mounted tiller and what are you charging per hour to bush hog? I was thinking...

My tractor will occasionally not start up. I turn the key and nothing happens. It will sometimes later start just fine after sitting. Is it the starter, ignition, or one of the safty switches on the tractor? I also noticed my fuel gauge will sometimes not work untill I lightly tap on the panel...

Their is a nice looking John Deere 4300 Pro-stock tractor here that someone has built that is for sale. It will be neat to see these at the pulls in the future. http://members.tripod.com/~fondabarr/sale-2.html

This is a little off the subject, but is related. Do you think they will ever have a class that is using the Compact tractors in tractor pulling? These Compact's would be built though like a smaller version of the Pro-Stocks,Super Stocks, and Unlimited Super Stocks. I think it will be very...

Has anyone lost one of cat-1 balls, also called bushings, were you attach an implement to the 3-ph. with the clip that is suppose to keep it from coming out still in place? The clip that holds it is not bent and the ball is suppose to be the correct one for the tractor. The dealer didn’t believe...

I have been quoted by my dealer $16,900 total at 1.9% for four years on a tn65 and about $1000 more for the tn70. How do the engines, transmissions, and rear ends holdup on these? I will probably go with the tn70 because it is only a thousand dollar difference, but will both pull a 6-row corn...

I have been quoted by my dealer $16,900 total at 1.9% for four years on a tn65 and about $1000 more for the tn70. How do the engines, transmissions, and rear ends holdup on these? I will probably go with the tn70 because it is only a thousand dollar difference, but will both pull a 6-row corn...