Search results

That 'splains it! Thanks.

I have that diagram. The ring clips are in place, but they aren't on the cable ends, they are on the bracket holding the cables in place. See edited picture. The hand throttle cable seems to be too tight internally to easily slide. Maybe it's kinked or something. Thanks.

I recently split my 1715 to install a new clutch. After putting it back together, I now have an issue with the throttle cables. When I hit the foot throttle it pops the hand throttle cable out of its seat. The hand throttle doesn't pop the foot throttle out. Should there not be a spring...

Thanks. Something to consider....

Thanks for the replies. I have a theory as to why the forks get misaligned on the hub. It looks like too much end-to-end movement of the 3/4 inch rod that goes through the case that the hub goes through. In these first two pics, you can see that there's about 3/4 inches on both ends that the rod...

Been having intermittent clutch problems. Slipping, not able to go into gear, nothing consistent. Finally decided to split the tractor. Although showing wear, the clutch and pressure plate seemed OK. What I did find was that the "hub" that connects the throw-out bearing to the pedal forks seemed...

So, I got the 1715 working yesterday and I got lucky because it did turn out that putting a new switch in caused things to work. Thanks for all the useful suggestions.

Also, while I have your undivided attention, can you tell me what these relays or flashers, or whatever these boxes are (besides the fuses)? Thanks again.

Not getting power to glow plugs. Also, dash glow plug indicator coil does not glow at all, so obviously no power. From the wiring diagram, it appears that both the glow plugs and the glow plug indicator are coming straight off the ignition switch. Is it safe to assume the problem is the...