Search results

So I noticed this the other day on my tractor due to a black oil like Mark around it. I assume it would have a cover that I must have lost. Anyone know what it's for or something I could plug it with?

Got bored this weekend and put together a little device for the 405lb neo magnet from CMS . This little guy works insanely well to pick up the metal in my burn pile. I am thinking it would also be good to hang up a shop light in the barn when I winterize the boat this summer. Part #MCHN-75

Purchased my 2002 4x4 with power steering back in June. Used it around 10 hours and noticed the front right wheel casing covered in oil. Upon closer inspection there is a hairline crack down the outside causing the leak. Called around and obtained a final case off a 1220. It came with top...

Time for service on my 2001 TC18. I think these are the correct filters below. Can someone confirm? Oil: Wix 57145, Motocraft FL-300 (Filter in it now is CNH 47427154) HST 1: Baldwin BT354 HST 2: Baldwin BT8905 Fuel: Wix 33264 Air Outer: Wix 49410 Air Inner: Wix WA10015

I have noticed my belt has some cuts in it and am wanting to have a spare on hand. Anyone know if this one for sale on Amazon will work on my side discharge 60" 914A. Amazon.com: Gates B158 Hi-Power II Belt, B Section, B158 Size, 21/32" Width, 13/32" Height, 161." Belt Outside...

Finally completed this project and wanted to share my results with the community! I love using my tractor and since I work a normal day job 8-5 I found myself only being able to complete chores around the house at night. I quickly found them when using the bucket the factory headlights become...

Re: Help me identify these leaks on my TC18 Thank you! I hope to tackle this project this weekend. I am having trouble separating the casing that attaches to the wheel which is connected to the hub. I removed all the screws and hit it with a mallet a few times but its not budging. I did not...

Re: Help me identify these leaks on my TC18 Put it back together last night and identified that my leak was actually coming from a small crack in the hub itself. I have a friend that is a skilled welder do you guys think that will work or should I try to find a part off a salvage?

Re: Help me identify these leaks on my TC18 Dung in last night and removal of the hub was fairly straight forward. I am thinking the seal may have just been dirty. Planning to regrease and reinstall tonight and see what happens. Does anyone know the best way to remove the seal without damaging...

Ran my new to me tractor all day Sunday and it worked like a top. I pulled it in my garage for the night and after it sitting for around 15 minutes I noticed a large black pool of oil? under the front right wheel and also all over the tire. I am thinking it may be hydraulic fluid from my FEL. I...

Purchased the 5ft CL box blade today at tractor supply for $580 out the door. After getting on here and reading some it seems that the 4ft box blade would be best. I plan to use it to maintain my gravel driveway, level out some dirt, and possibly make path through some brush I am clearing. They...

Newbie diesel owner here. Ran my NH last night for a minute tor two with fuel shutoff valve in the off position. It sputtered to a stop. I started by disconnecting the fuel line to the shutoff valve letting it flow then reinstall. Next I did this for each line going to the bleeder screw. Then I...

Wanting to make some touchups to my new to me TC18 chassis/PTO. It appears to be a dark grey. I did a search but was unable to come up with anything. Was hoping there is a Rustoleum that is close enough. I picked up some Sail blue to touch up my mower.

Thanks so much for all the helpful advice! I ended up purchasing the Titan attachments triangle one with a hitch. Primarily because there was an open box on ebay for $70 shipped. My plan is to purchase either the Tri-ball with a hook or just get a hook or d-ring receiver at harbor freight...

Need help figuring out which would be these option for my New Holland TC18. I am wanting to get an attachment to pull our boat short distances in and out of the flat sloped garage and then also have a rear option to pull small logs and trees. I also plan on purchasing the Harbor Freight Quick...

The trailer has disc brakes on each side. I will also be purchasing a used zero turn in the future to use to cut the grass so the mowers primary purpose will not be simply for just mowing. After talking with a few others I am wondering if I should hold out and go with a John Deere. Could someone...

Hello All! I have come across a one owner 2001 NH TC 18 2100hrs Diesel 4x4 power steering 7106 FEL and 60" belly mower for $7,500. They have it described it in great condition, recently serviced and meticulously maintained. Is $7,500 a good deal? Also any advice of things I need to look at...