Search results

Was having problems with getting fuel to the engine. Back tracing found out that the fuel gauge sender unit had rusted all up and rust flakes were clogging the inlet line. I know we need a new fuel sender. Problem is, the OEM one costs almost $200 from Messicks (part #86558072). It's a super...

Hey all, I'm getting closer to putting this thing back together. However, I do have an issue at the moment. The shims that I had to take out got damaged and several of them rusted up pretty decent over night. What I was wondering is if it would be possible to use a Truck differential bearing...

I looked through the forums and I either I didn't get the right combination of search criteria, or it's not here. I have a Raptor that's about 4 months old. It runs really nice. I don't have much to complain with it. However, there are a few issues I find odd and would like to fix First...

Just out of curiosity, is it possible to upgrade the front wheel differential to a locking differential? If so, how would you go about finding what part replaces the stock?

Well, I'm pretty sure the ring/pinion broke somewhere. I was driving forward and the front tires locked and I slid a little bit. I was able to backup and get the tractor out of the wet/boggy part of the yard and onto some drier land. I did take it out of 4wheel shortly before that because it...

I ran into an odd issue today. First off, I got the tractor a bit stuck (it sunk into the mud as I was digging a pit for a septic tank replacement; it's been raining a lot lately), and I had to lift the tractor up to put some boards under the tires to get out of the hole-ramp. Well, I was able...

I'm needing to replace several seals on the hydraulic cylinders and I'm wondering if anyone has some good sources for the seals and what to recommend for upgrades? I would like to also beef them up or getting longer lasting seals. I've looked around and I can find several sites with seals...

Hey all. Have a NH TC40D here. Started having a little blueish smoke and an odd knocking sound. So I disconnected each injector to find which one may have fouled out. Cyl #2 when disconnected stopped the knocking sound. So I ended up taking all the injectors out as when I disconnected the fuel...

Hi, I'm new to the posting scene on TBN. I've done lots of reading on the site and get loads of information from here. I have a TC40D with a 16LA loader. The control valve is very lose and upon inspection, I found that the connector rod is very worn out where the stick connects to the valve...