Search results

You just can't go to the local big box farm store and get parts for a 35 year old Uni, so I made the ones I needed this week. The new brake comes in handy.

Here how I have my saw setup for angle cuts. It is on a swivel and I can also change the height.

The gates are 7' wide each. Total open 14'. This picture shows how close we got them lined up.

The panels are bolt together. Some parts are 6' tall, 4' tall and 3' tall. With panels length from 4' long up to 12' long. All powder coated. The post on the 6' tall, panels and gates are 1/4" x 4" x 4" and have a 6" H beam cross welded on to the bottom. For the 3' and 4' tall panels, the post...

90' up and 30' more to go.

Just pull the pin to remove it. Adds 6" to 7" length to the drawbar, which lets you make turns better. I have one with a 2" ball and one with a 2 5/16" ball.

Here a picture of my TYM 754 ready to cut hay. I have had it for two years and have just under 400 hours on it. Just a few small problems that my dealer took care of. The E PTO is very useful. I only use the 540 PTO when I am mowing hay or grinding feed.

I seen one been used at a show last year, but can not find any more info on them. Anyone know were to find the info?

Texasmark, It floats good front to back. It's side to side that I do not have it level yet. With this one you have to adjust the lift arms and then use a chain, that runs from one arm to the top link on the tractor to level it from side to side. The two smaller ones I had, work just like yours...

With a 2.1m SaMasz drum mower on a 74 hp tractor, I will cut 5-6 acres per hour. With a 40 hp tractor a 1.85m drum mower will cut close to 4 acres per hour. And I also have over 150 sheep. A 2.1m drum mower will out cut a 3m disc mower.

With a 210 drum mower, cutting at 10+ mph. Just the right size tractor for that size mower.

Just about got it leveled out today. Here what it looks like on my TYM 754. Mowed at 10+ mph today.

KY Fastline has a two page add for RK (TYM) tractors this edition. Their = to a Kubota BX1880 is $3500 less and has a Yanmar engine. So, you can get a red tractor, with a green engine for $1000's less. Don't tell the JD people that.

Cut this out this week.

Got it this week. Just got to unbox it and put it together.

Anyone have one. I am looking at a 210. I have ran drum mowers for the last 25 years, started with a PZ 165, then went to a AGRO 185. Now I have a 70+ hp tractor and the 210 will be a better fit. Have a Tar River dealer not to far away, but they just go up to the 185. 4 hour drive ( one way) to...

This is were it is going. It will be for my rams. The white step in post are the corners.

cut some 1/2" and 3/8" plate for loader brackets this week.

Got all the frame welded up this week. It will be 33' long x 24' deep x 12' tall at the fount.

14' 2 1/2" long x 6' tall x 2 1/8" thick, app 900 lbs. Opening was 14' 3" long x 2 1/2" wide. Then had to drill 6- 1/2" holes to bolt it in place.

Walk in customer Sat afternoon. 3 1/2' tall x 2' wide. 5 min cutting time. $200 item.

Just put a Hesston 4600 in my barn. Now if it will stop raining I can try it out. It is replacing a NH 267. It looks good for its age. The guy I brought it from had bale app 1000 bales with it 2-3 weeks ago. He had 4 balers and his tractor driver did not like pulling this one. Anyone want the NH?

First, I know if I do it wrong, I will destroy something. I do that all the time anyway, so no big deal. That is the reason I own a metal fabrication shop. Have plenty of HP, so torque is no problem. 30-45 hp required equipment, 70+ hp tractor. 2100 rpm's = 540 pto I should be able to put the...

11 skids sent out today, plus 20 some packages at the PO.

Got these done this weekend.

Finished last night. Just under 3800 small sq bales. Have 2100 bales in my barns and just need app 1000 bales for my sheep. So, 1000 more to sell. Now have to get the Uni out and ready to pick corn. With a 4 row head, it takes app 10 min to fill a wagon. Hay plans for 2017, New mower and a...

Here is the first of four sheets I hope to cut today. Then I need to finish logo'ing and powder coating app 75 tumblers.