Search results

Use the power beyond port and add a second valve which allows infinite control and fine adjustments of the grapple. I really like the previous posted integrated 2nd valve.

Constructing my 3rd and final paver project. 2 previous ones 600 sq ft each I rented a compactor from the depot. Worked great but only have it for a limited time. Local craigslist has been tough most over 1k. Anyone have any experience with the online ones... no name brands. in the 500 to 600...

Update... I finally got a chance to use the plow with the rubber stall mat attached to the blade. It worked really well like a giant squeegee here are a few pics

Updated version, ratchet strap takes the load off the lower bucket. Chain goes to top of bucket and the curl function drops the polw to the ground. Loader height does not need to be moved once its setup. My bucket also has 3x3 x 1/2 inch angle iron welded to the top rail for support and has the...

the brooklyn brewery closed in 1973 Been used by me, uncles and grandfather.

not sure what this means...my thumb has picked up huge boulders, 14 foot telephone poles and never had a prob. I did add piece of angle iron to the top of the bucket Back draging? The thumb is on top, please explain.... Popping welds? What are you doing? Maybe you need a bigger grapple. Got pics?

single pass, decent penetration.

All finished not bad for a amateur....

titan tooth bar, going to weld it up tomorrow

I am trying to decide which one a piranha bar or Titan tooth bar. I will weld the Titan setup my self. Just not sure which one. The piranha looks small and the Titan teeth look BIG, but I like big....and I work my stuff hard I have seen all the posts on the piranha who has a tooth bar? Going...

Hey guys going to do some welding tomorrow for my new plow setup. I have a Lincoln pro mig 175. I don稚 remember what the gas setting should be. My tank is a argon mix. Thanks, big chief

Took my tractor to the dealer today:( Usually every wknd I am doing something with it:D If I get caught up with everything then bring it outside I clean it, check everything over fluids etc.... I just got the magnetic oil pan heater I was going to try out too :cool2: Hopefully I get it...

Watch the video If i sit in the seat and start tractor as normal no flashing lights.period If i sit in the seat with brake on, key on (not running) and get out for something and get back in the seat (which closes the seat switch) the warning light flashes and then goes away once running...

Hst filter 11102303100, made by TYM for a 2106 Emax 22 hst I can稚 find a cross reference for this filter anywhere. It looks like it痴 a dealer only filter. Looks like I値l be taking a trip to the local dealer which is about 45 minutes away. I知 surprised no one makes this filter Anyone else have...

OK guys here are a few tips for you Emax 22 HST owners. Just recently I begin having starting issues in the morning. The temperature is only around 30?ï½° which I felt should not of been an issue. The tractor will take several attempts to start while billing heavy black smoke. Once warmed up...

Here are my new Titan bucket forks. Well built I like them The chain binder straps holes are also under the bucket which you can’t see. The straps go all the way around the bucket back to the bottom of the clamp to prevent to much pressure on the front of the bucket lip

I figured most tractor owners like me want some sort of snowplow on the front without spending a fortune on the factory units. Here is what I used and did. Meyers 6.5 plow 2 Titan bucket clamps A few feet of square tubing Large rachet strap A little welding and cutting and your all set. The...

I just added a grapple. You have to just understand how the power beyond Plumbing works I used a single spool valve and premade hoses and fittings from the surplus center

2016 emax 22. Here are some pics of what I have done myself. When I was looking on the net I didn't see much for the red guys, mostly BX. So enjoy the pics and mods. I also made a bucket clamp for a meyers 6.5 snow plow I will post.