Hi all,
Just to let you know the parts have arrived, and they look in very good condition, I am very plesed.
So now I just need to summon the energy and the enthusiasm, to split this tractor. What greaves me is the fact during rebuild I was inches from this shaft. Now what a pain, but at least I...
The shop that is selling the gear clutch, also has for sale a 1210 gear box casing, it looks identical to mine so I am fairly confident (fingers crossed) that the gears will fit. Seems like they have dismantled a complete 1210 gearbox as they have other internal gears for sale.
Here's hoping.
No not yet because the items from ebay cannot be returned even if they are incorrect, and I do not want to be stuck with a stripped tractor for many weeks (delivery quoted as 23 May to 21 June), so I am quite happy to wait until I have the items in my hand before I start.
hello Tractor tech, Just to let you know that I have bought the gear set and they are on the way, will inform you when received'
Thanks for your help,
Rabet
Hello Tractor Tech,
In answer to your questions:-
It has a single 540 rpm PTO speed.
As to where it was bought, I do not know, but if I had to guess, I would say it was bought in Malaysia. (it was not a grey import)
Where it was imported from I do not know, but it says made in Japan.
Spoke to a...
Hello, This is good information.
My 1210 is a 1984, the one advertised is a 1986, are they the same ?? any way of checking. The details from the machine plate are :- Product identification - UC10079, Model - AC352E, Unit – 6M01B, Engine – S720 – 20183. Are you able to use this info to check if...
Hi all, As you know I live in the jungle of Borneo miles from anywhere and it takes me 2 hours drive over the mountains to get to a commercial centre, oh and I am 73 years old.
If there is anyone out there who feel they might be able to help me trace and aquire the components I need to repair my...
A big "thank you" Mr Tractor tech for the information, well I have been trying to get my thinking correct. When the PTO is not engaged is that clutch engaged or not, (I think it will be engaged) because the gear is turning, and if this tractor has been doing nothing but pulling a trailer for all...
Hello Mt Tractor Tech, I drained the oil today and opened the gearshift cover and looked in. Well I think I might have seen it, but not 100% sure. may I ask a favour please, as your manual is far better than mine, could you find the relevant pages that detail how to remove this overrunning...
Hello Mr tractor tech, you have been a massive help, my manual does not even have a section on the gear box, rear case only. If mine is the same at least I know where it is. your second thumb nail pic, item number 3 One-way bearing, do you have any idea where it can be obtained from please??
I...
Thank you Tractor tech for reply, have had a good look at what you sent and I notice that it is showing Ford 1215 (mine 1210) and states production after 87, where as mine is around 84, also I do not see anything like what your pic show, in my transmission. Any other advice please.
Rabet
Hi all,
I have just opened the hydraulic cover and removed the PTO shaft, looked in, not too much to see.
A few points I need to make before progressing.
I live in the jungle of Borneo.
I have a Ford 1210 manual (not worth the money I had to spend on the paper to print it) absolutely useless.
I...
Firstly, thank you for your reply, much appreciated.
The details you have written is exactly how my PTO performs. But when I select PTO with engine running it will turn a few times then stop, then might start again. When it is turning you cannot stop it by hand.
Do you have any idea what could...
Hi all, I am searching for anyone who has a :- Ford 1300, 1310, 1500, 1510 and 1710 with single plate clutch, as according to the Ford manual they were fitted with the 'One - way clutch assembly". and my question to you is, when standing facing the PTO shaft, with engine off and PTO...
Hi all, as the title says I have a problem with my PTO on my Ford 1210.
Let me give you the details, I have rebuilt this tractor complete, during the rebuild I removed the PTO shaft and replaced the seal and today was the first time of testing, which brings me to this problem.
When facing the...
Hello MarkMac, Thanks for the warning. I knew parts are difficult to find, but I did not think they were impossible to get. Not only are they impossible to get but flipping expensive when you do find them. I did some work for someone and they said they had a small tractor, would I take it as...
Hi again,
Does anyone else know of where some engine spares (Shibaura S723) could be obtained. Like piston rings Std, head gasket and con rod bearings Std.
I thank you both for your information, In answer to thepumpguysc, I was using a diesel pressure testing kit, and to lens12, I have sent you a mail and looked on your web site but I cannot see any spares for Shibaura S723 diesel engine, unless of course I am looking in the wrong place.
Hi all, I have a ford 1210 somebody gave me, had been standing 10 years and the engine was in very bad state. To cut a very long story short, I have got it to a stage (without removing the head) where it might run. I tested the compression pressure and I got 10b (150psi) on all 3 cylinders. Does...
I would like to thank everyone for the help you have given to me, and yes I am still looking for a mid underbelly PTO, so if anybody knows, please let me know.
Rabet
Hello again Mr bmaverick, Well wonders will never cease, I found it !! it took me a long time, but thank you. one question you might know the answer too. Do you know, or do you know anyone who knows where to purchase gaskets sets for the 1210 please.
Again, thanks for all your help.
Rabet
Hello, Mr bmaverick and thank you for your reply. I joined the "other" tractor forum and spent around 30 minutes looking for the Resource section. Unfortunately I am on the wrong side of 72 years and find this so confusing. Could you help me with instructions of how to get to where I need to go...
Thanks Sandman2234 for reply and comments, any chance of a few pictures of the set up on the front crank connection. I have seen a u tube video of the cables connected from the 3pt hydraulics. The output speed of the underbelly PTO is 2000rpm when rear PTO is running at 540rpm.
Hello, a big thank you to those who responded to my cry for help.
Halftrack you might quite well be correct, I only know that my machine is a 1210, cos that is what is stamped on the side. I have seen several pictures of gear change machines with the mid PTO and mower deck. CliffordK, I have...
Hi all, quite some time since I posted, I am not sure if this is the right place to post this request and sorry if it is not in the correct place.
I live in Malaysia, I have a Ford 1210 tractor and I am looking for a "Mid PTO" unit, so I can use a under belly rotary grass cutter. If anyone has...
Hi all, I have a cat 416b 1994, with a Spicer transmission GP No 9U9495, Spec 15487, Serial No E95 4802. I have not had it too long and I am trying to make all the instruments work. In doing so I cannot find the temp sensor. Been looking through the manuals but no where can I find where the...
Hi all,
I have just bought a Cat 416b back hoe, 1994 which seems to have been well maintained but the swing hydrauilcs do not seem so good.
Problem as follows:-
When swinging hoe from left to right and back speed seems to be ok, not lighting fast, but ok. When you lift the back end off the...
Hi all,
Can any one help with information as to when this tractor was made.
Ford 5610 III 4 wheel drive
Serial number BC19420
Model LA414D
Unit 9H31B
Engine 206805 9H30
Transmission 9H29B
Hyd pump 9H24B
Hyd lift 9H30B
Front axle 709/19 F56 /0011340 Ref number 122965
This is a machine that is...
Hi all,
I am thinking of buying the above machine, but it does have a problem. Currently the machine in not in running condition, but I am told that the problem is when you raise the boom / bucket the engine shakes voilently. They say its ok when move forward / backwards.
So the machine just...
Hi all,
Could any one please help with year of manufacture of a case 580K back hoe with serial number JJG28752 ??
I have been searching the internet for 3 days and cannot find any information.
Many thanks
Rabet
Hi all,
Quick question,
I have rebuilt my Perkins AD4.203 engine, fitted copper laminate head gasket, Torque to 75 lbs/ft
At what hours running should you retighten the head??
Rabet
Hi all,
Well the title says it all.
Whem I bought the tractor the engine (perkins AD4.203) was not running (several bits missing) and the fuel tank was just laying on the top of the engine.
Now I find that the fuel tank, I think, is off a 135, IT is certainly not off a 65, I have seen picture of...
Hi all,
I have read some posts, some where, concerning replacing head fixings and how costly they are, which I agree even if you are luckly enough to be able to get them.
Also in a perkins manual I have read about a problem of the older engines "popping" the threads in the block and the manual...
Hi all,
Could any one help on the question above.
All direct injection diesels do not have the need for heater plugs to start.
The perkins AD 4.203 and AD 3.152 does have a single heater plug fitted into the inlet manifold, BUT DO YOU NEED THEM?????? and why.
OK, you might say in cold...
Hi all,
The title says it all, what is the correct oil for the transmission / gearbox on TO35 FE35 or 135 with NO MULTI POWER
There seems to be some considerable differance of oppinions.
The manual says SAE 80 below 30 deg and 90 above 30 deg.
Hoping some one can help
Rabet
Hi all,
I have a very old perkins AD4.203 which uses head studs / nuts and a 1976 AD4.203 which uses head bolts.
Can any one advise me why they changed??
The reason I ask is that I have read that on the older engines they used to suffer with head threads "popping" ie the top 3 or 4 threads...
Hi All,
Could anyboby offer any advice on the above.
I have opened my injectors and I have 2 differant nozzel tips, BDLL150S6554 and DBLL150S6372.
I have searched the internet and found that yes they are both marked up as to fit Perkins AD4.203, but it does not state what is the differance nor...
Hi all,
Have been searching utube but cannot find anything.
I have completly stripped the tractor and after repairing all the broken items I can turn my thoughts to rebuilding.
Need to start with fitting the diff unit into the axle casing and setting the bearing pre load, BUT I CANNOT FIND ANY...
Hi All,
Still trying to find information on "what brakes"
My tractor (name plate states FE35) does not have drum brakes, but inboard disc, wet or dry I do not know.
Does anyone know which model first had inboard brakes?
Is it possible to identfy if wet or dry with out stripping down (ouch)...
Hi all,
First thanks for all the help received.
Question, My AD4.203 engine has a 11 inch / 9 inch dual clutch (what a lump) but HOW MANY CLUTCH SPRINGS should it have, I have got only 5 (the 6th one is broken). I have seen many pictures showing 12? and what are these insulated washers that...
Hi all,
I have just joined, hoping to gain information and help on many issues with tractors.
I live in the jungle of borneo and have done so for the past 17 years. Out here there is no such thing as cheap or scrap, every thing has a value even a 60 year old tractor with half an engine costs top...
Hi all,
I live in the jungle of Borneo, and have found / bought a red Ferguson tractor, but it is not what it seems.
I cannot identify the engine. Tractor serial number SNM172001, so it should have a perkins 3.152 engine, thats where it all goes wrong.
The engine is a 4 pot, have found a number...