Search results

I googled up the 5000 series and came across this link: John Deere 5E 3 Cylinder Series Tractors I assume it's a European model (altough I can't seem to figure out from which country, as there's no indication), as the styling is completely different. At any rate, there's a little video that I...

A long-time poster with a new tractor... and just had to share with my on-line support group! Brand new 5055e with 553 global loader, loaded tires + 4 wheel weights + front weight bracket, preheater, block heater, rear H-chains, 8' hydraulic angle plow blade, pallet forks and canopy. Due some...

For the life of me, I cannot figure out how to remove the blower assembly off of my 48" mower deck on my 425. I had a bagger on a GX335, which was easy - simply pull a lever, release the tension on the belt, take off the spindle and remove. I just can't figure it out on the 425 and have no...

As the thread name suggests, I am wondering why I'd opt for a single tine over a three tine bale spear attachment. Three seems more stable - I can't imagine the savings are that much. Anyone have an opinion or experience? Thanks

Hi, all. I'm in the process of establishing a business and plan to buy a 5000-series Deere. To justify the expense, I've found 2 farms that are willing to rent the tractor. Any thoughts on what I should be charging? Per hour, I'd guess, rather than per day? It'd be owned under an LLC, so...

Hello, all. I'm in the market for a 45+ hp gear-drive tractor. So far, I've looked at the following: L4600; JD 5045e; Massey 1648; New Holland Workmaster 45; and Kioti DK45 & DK55. I really liked the DK, but I'm concerned with resale - I don't have a lot of experience with haying and may find...

Hi, all. I'm looking to get myself set up with a small haying operation - I have access to a 24t baler, tedder and rake. What I need is a tractor and a mower. Here's what the dealer said (keeping in mind the 24t is an old, but reliable square baler - about as small as they come): I asked...

Been a while... but wanted some suggestions about whether you all think this trailer would work for what I feel I need (want!). It's a 5000lb capacity 5x8 Maxum dump trailer. Honestly, I didn't think they made a hydraulic dump trailer this small, but it's intriguing to me because I might be...

I've seen a lot of people ask if they have to take the snowblower's quick hitch off of their 2x20 model tractor when fitting the loader. I know the quick hitch bumps into the park stand on the 200cx loader. My question is: do I also have to take off the prop shaft that connects the mid-PTO to...

I have a 425. There's a blade listed locally for a 420 and another one for a model 318... Any idea how compatible the blades themselves are? What about the angle kit? The reason I ask about the blades and angle kit separate from the whole quick hitch assembly is because both sellers also...

Seems that participation on this site is way down. Way, way down. Two postings all day today? I know it's a Sunday, but really?! Is there somewhere else that is luring people? Because I know the subject-matter sure isn't any less popular - my local salesman sold 7 in one day earlier this week!

I've never used a box blade. I have a 2320 and a friend has asked me to come over Friday to help him put in a bluestone patio in a fairly level area. Another friend has a box blade... I figured it would be good to use the box blade to scratch up and drag the grass, as opposed to trying to cut...

Took delivery of a used 425 on Friday (I should say, the dealer dropped it off Friday. Could have used a lesson on how to remove the powerflow... still can't figure it out, but that's another thread). It has 867 hours and they rebuilt the motor, since it had the camshaft issue and was broken...

Man does that thing fill up quickly!! Just cut with my "new-to-me" 425 with 48" and powerflow bagger... couldn't cut much more than 600' before having to empty. Can't imagine what it'd be like with a 60" deck! Otherwise, pretty thrilled. Except that the dealer ordered the wrong seat...

A while back I posted a thread about my dissatisfaction with my x324. It had to do with build quality and my impression that Deere has cheapened out on critical components to maintain a price-point. Which I viewed as a problem, since it was still a $4500 tractor... that wouldn't start and...

I'm looking for a new seat on a 425 that presently has the rubber blocks... Anyone have any advice? Like a reference to another model that fits and is most comfortable? (i.e. take one off an x485!). Would I need to fabricate an adaptor? Also, did anyone add any length to the seat rail? It...

Why are the 2320/2520/2720 the only tractors that have a forward-leaning top-half-of-the-folding ROPS? It seems to lend itself to better protection of the operator. Yet, they didn't incorporate the same design on the new 1-series. Nor did JD modify the 3000+ series tractors with it. Haven't...

I've seen people on this board talk about having to grab a good tractor while it's available - and not waiting. Looked at a 425 with 244 hours on it for $4000. Immaculate. Went to look at it at a dealer's lot on Thursday afternoon. Spent the rest of the day and next morning figuring out how...

I'm pushing 40. And over the years, I've often referred to myself as "the youngest old man you'll ever meet." I fit every stereotype: I'm stubborn, wear a v-neck t-shirt for an undergarment, and always have a pen in my shirt pocket. I use a napkin for a bib at every meal. You get the...

Any tips on how to release the parking brake in cold weather? I don't set it anymore because it remains locked every time - luckily, I can park it on level ground and put a little down pressure on the front blower. But, it's really bugging me... I try stomping on the brake pedals. Nothing. I...

I'm aware that this is the JD forum, I'm just curious whether anyone here has experience with looking at or driving the current Cub Cadets. I had no idea that they were bringing in the equivalent of a Deere 2720, with a different wrapper - the SX3100. I like the extra lighting on the lower...

I know JD is just now introducing the 1-series, but thought everyone would like to see what comes next... well, maybe not "next," but it's a pretty cool concept. Jalopnik: Obsessed With The Cult Of Cars

I've been looking (longingly) at the 55 series tractors - a lot of people talk about how it was the perfect tractor series from JD. I tend to agree - but probably for the same reasons I like Grand Wagoneers and Saab 900s. Purpose built and a lot of steel. So, I took out the 55-series brochure...

Well, I mentioned in another thread that I'd outline the reasons why I traded my B2920 Kubota in for a Deere 2320. And at the risk of criticism, I'm writing this up to save someone in my position the expense of making the same mistake... I believe the more you learn from other's experiences...

It's far too cold outside right now to spend a lot of time figuring this out by measuring, so I'm hoping someone knows the answer off the top of their head. I took deliver of my 2320 with loader and 54" blower on Wednesday (I wasn't home at the time). The dealer left the loader in front of the...

It's far too cold outside right now to spend a lot of time figuring this out by measuring, so I'm hoping someone knows the answer off the top of their head. I took deliver of my 2320 with loader and 54" blower on Wednesday (I wasn't home at the time). The dealer left the loader in front of the...

Came home last night to find a new 2320 with a 54" snowblower and 200cx loader, as well as 12" of fresh snow. It's taken a little shuffling around of tractors and implements, but I'm convinced that I've finally got it right. After just one pass of the blower... I'm a believer! I never was...

Curious is anyone has seen or heard of ag tires (R1s) on a 2320? I know that you could get them for the similarly sized Kubota B7410/7510/7610 models. If aftermarket, can anyone give me a sense of cost? Also, are there issues with fender clearance or using the same width wheel?

I got a $100 coupon from the deere.com website that can be used for a "Frontier attachment." Do you suppose I can buy an i-match hitch with it? I'm kind of confused about what constitutes a "Deere" accessory vs. a "Frontier" accessory - as the Deere attachment brochure includes both...

I've been thinking about getting a 2320 and wonder what people have done to "personalize" them after owning them for some time... I'm not thinking of implements as much as, for instance, installing the "SE" suspension seat. What else? Block heater? Bucket hooks? As I've spent time on this...

I know this is a variation of the same question, but I can't seem to find (in the archives) an answer to my question: Is the 2520 worth an extra $2500?! I used to own a 2320 and sold it - foolishly - because I was short on money. I loved the tractor. Now, I'm thinking about buying another...

I have a new set of the expensive, Norwegian diamond-shaped chains for my current tractor with 33x12.5x15 rear tires. I'm looking at a 2320 - the spec sheet says it comes with 31x12x16.5 tires... anyone have any idea whether the chains I have will fit? Even if I have to removes some links...

I have a friend who inherited a BX2200 that came only with a mid-mount mower (i.e. no loader, so no joystick). He has an employee who has a BX front blade and quick hitch he's willing to sell inexpensively... can anyone tell me what's necessary to add a valve block to this tractor? Would the...

Well, first, thanks to everyone that weighed in on the plow v. rear blower question... I'm still pretty unsure of what to do. In fact, I've realized I have 5 - yes, 5 - viable options, in order of least-to-most expensive: 1. Front mount snowblower for my lawn tractor: $1600 2 Rear mount 3pt...

I have a B2920 and live on a private, dirt road. The plow-guy that takes care of us is somewhat unreliable and rarely cleans the road to the full width (it sometime seems as though he goes down the middle of the road in one pass, then goes over the same path - so, it's only plowed...

Wonder if the pin locations are the same? I searched, but can't find the thread that made me think they are (the thread had to do with adding the quick-attach style to a B2620). Thanks.

Have been checking out these models and can't figure out a couple of options on them... hoping someone can help: 1. I believe they're identical in size, including tire dimensions. Correct? 2. Can you get power beyond? i.e. to run a log splitter? 3. The brochure states it can take a front...

Hard to believe the risk that some people will take... YouTube - OMG THAT'S A JOHN DEERE TRACTOR YouTube - john deere 790 YouTube - John Deere 4110 running a 47 snow blower

That's the only word I can think of to describe my satisfaction with the x324 my dealer left off with me today. It cuts beautifully. Tight turning. Rides comfortably. Reasonably quiet. What else could I possibly want in a dedicated mower?! The lawn has never looked better. And, yes, there...

Was looking at a posting on the JD side and saw someone asking about the pros/cons of a push plow vs. a frame mount plow... the consensus seems to be similar to this side - i.e. snow blower being best for long drives or snow drifts, frame mount otherwise and, well, no real advice for the push...

I'm ready to buy a mower and wonder if there's some real-world advise for deciding between these two... I have a tractor w/ FEL & brush hog, etc. to do snow clearing, etc. So the purpose of the tractor is to be a dedicated mower. I haven't ever used a zero-turn. I've heard the ride is rough...

Can anyone comment on whether a zero-turn mower (i.e. Z425) can go up/across slopes and hills? They're so low to the ground and relatively wide that I have to believe they can do it better than a lawn or garden tractor. Wondering about real-world experiences...

I'm ready to buy a mower and wonder if there's some real-world advise for deciding between these two... I have a tractor w/ FEL & brush hog, etc. to do snow clearing, etc. So the purpose of the tractor is to be a dedicated mower. I haven't ever used a zero-turn. I've heard the ride is rough...

I have to admit, I'm one of those people that thinks my tractor should be capable of doing (pretty much) every task around my property - instead of one dedicated machine for each separate chore. That's why I chose the B2920 and ordered it with a FEL and MMM to start... with a plan to add a plow...

I'm in the market for a brush hog and it seems that everyone leaves them in the tall grass until needed... I understand that. My question is if it's OK to store the loader outside and disconnected from the tractor. I don't have enough room in my lean-to to store both the Kubota and the loader...

Anyone own either? Have comments on which is better and why? They're very similarly priced this month. The only difference I see is the DR claims a 4 1/2" v. 4" on the Wallenstein. And the Wallenstein seems to have a nicer, wider hopper for feeding.

I have owned four tractors in the last several years: in order, a BX1500, a John Deere 2320, a John Deere 2305 and now a new Kubota B2920. Have switched properties in between two. But that's beside the point. The B-series is the only one of these tractors that chews up the ground when I turn...

I looked at Kubota's new website today and checked out financing rates... I wonder if it's current, as I thought there was talk on this site a week or two ago about 72 mo. 0% for tractor financing. But the site only shows 60 mos. At any rate, just below 'rental financing' there's a Land Pride...

Anyone have a canopy on their B-series? I looked at the Sunguard canopies and they seem OK, but it's mounted to brackets that put the canopy forward of the rollbar. My whole interest in a canopy is to stay a bit drier when snowplowing. Having the canopy forward of the ROPS would seem to allow...

The most enjoyable part of winter skipped us, for the most part, here in northern Vermont... of course, I'm speaking of snow. Although the Burlington area had a record for one-time snow early in the year, it's been a drought. Just cold. That is until today... I'm trying to plow my gravel...

I've brushhogged with a DR-walk behind mower for years. Hands-down, it is my very favorite piece of mechanized equipment. If you haven't ever used one, they're the slickest device, as they're balanced nicely, geared perfectly and unstoppable no matter the slope. Problem for me is, I've...

I took delivery of my B2920 the other day and am very pleased. Looked it all over yesterday for places to put extra lighting - as I couldn't see much while moving snow with the loader at night. I noticed a threaded nut welded to the rigid part of the ROPS and another hole just below. It would...

Well, after spending a lot - I mean a lot - of time looking at tractors, I finally made my decision and picked out a B2920 with a loader and a mid-mount mower. More attachments to come... I want to thank everyone for their patience answering all of my questions and for offering their insight...

I'm continuing to spend all my time researching on-line, rather than in-person, as I'm too busy to get to any dealers. Now that I've narrowed it to a B-series 2320-2920 model, I'm trying to figure out my needs h.p.-wise. The tractor is going to primarily be used for FEL work and to run a...

I'm continuing with the research on these models... and wonder if anyone has mounted a Fisher or Curtis front blade to replace the bucket on a B2620 or B2920? I know it can be done with the B7800 and B3200, as well as the B2630 and B3030 models. I'm also aware that the quick-attach from a...

I see it is still listed on the Kubota website, but I remember my BX1500 was still on their site for many months after it was discontinued... If so, I may consider it as a possibility for my next tractor. They seem to be popular, strong and affordable.

I know this is a Kubota pricing thread, but I wonder if people can tell me what they paid for various aftermarket rear blades from Land Pride, Woods, etc. Are you happy with the blade? Any limitations or design features that bug you - i.e. pin position's awkward, welds break, etc? Does your...

I've narrowed my search to the new standard B-series. But, I'm hung up on the operation of the split brakes, which is an important feature for me with plowing (both snow and single-bottom). This is more important for snow plowing, as I'm obviously changing speed more often than a straight-shot...

I'm finally ready to admit something that's embarrassing... I made a mistake selling my 2320. I did it because I couldn't justify spending so much money to but the mid-mount mower. On the one hand, I spend $14k+ on the tractor and loader. But it was manageable, because the monthly payment was...

I can't seem to find any info or pictures of a mid-mount mower on a 790/3005. I'm debating the merits of a larger tractor and may pass up the convenience of the hydrostatic in favor of the higher output engine and PTO that comes with the gear drive. But, I need to mow with the tractor. Can...

The 2630 is $2600 more than the 2620 - at least according to the kubota.com site. Both are 26hp. Both are "B" series tractors. Aside from perhaps a mid-PTO standard on the 2630 and larger hydraulic pump, what justifies the price gap? Anyone have a chance to try both out? I'm looking for...

New Holland | Boomer | Tractors | New Tractor - 8N, 50 Horsepower Droving back to the office, I saw this sitting out front of the local Kubota/New Holland dealer. Very cool, indeed. Goes to show I'm not the only one that thinks there's a market for brand new products that combine old-style...

Saw several comments about "shimming" a loader on a 790 to increase capacity. I'm wondering if there's a way to get some quicker dump cycle speed for the 200cx on my 2305... the thing is darn slow. Not interested in adding capacity, as it's plenty capable for lifting. I'm also thinking...

I have the opportunity to buy a used powerflow blower... it's presently on a 48" deck on a 10 year old model 345 Deere garden tractor. I have a 2305 with a 54" deck. Does anyone suppose they'll interchange?

Took delivery of a new 2305 last night. Too bad it doesn't have a "4WD engaged" dash lamp like the 2320 had. Also, if I recall correctly, the 2320 had a glow plug lamp that would extinguish after about 3 seconds - the 2305 has an oil pressure lamp and a battery charge lamp that stay...

Are you able to adjust the 3-pt hitch on a 2305? Or is it an "all or nothing" type of 3-pt - i.e. all the way up or all the way down. Nothing in between. I have a TSC 3-pt. frame that I attach a 60 gallon plastic tank to for collecting sap. Wondering if I can set the adjustment at...

I'm wish to part with two attachments for my JD 2320 - and am willing to sell at a "seasonally adjusted" price. They are: (1) an 84" custom built plow blade that attaches to the quick hitch (works incredibly well - saves a ton of time and the tractor has more than enough oomph and traction to...

I've had my 2320 for about a year and a half and feel that the hydrostatic drive speeds are just a little off. Especially on inclines. By that I mean, if I had the choice, I'd switch out the gearing ratio on both speeds - or better yet, add a third speed in between. I understand the new...

I'm unable to find anything on the internet or here. Does John Deere offer financing for used equipment purchased through a dealer? What about a refinance? I have a 2320 and am debating downsizing to a garden tractor or, perhaps, (due to the inevitable sticker shock from buying another...

Well, it's all finally together. I'll condense the story here: I've been debating for a year now about how best to plow a 300 yard road. Don't have a huge budget, so last winter I just used the loader. Quickly found the R4 tires to slide everywhere, so a set of chains were added (to the tune...

I have a 2320 with loaded tires. Other posts have suggested that this should add about 400-425lbs. I'm putting on a frame-mount snow plow (actually, a JD quick attach mount with an 84" light-duty Fischer style plow). Would I be better off adding a ballast box or wheel weights? I like the...

This is an embarrassing and, frankly, stupid question. But one that I think has some merit in asking: Whenever I start my 2320 (usually on Saturday morning, after having sat since the previous Sunday night), I let it idle for 2-3 minutes before moving. I then let it idle for 15-20 seconds...

Can someone please inform me about how the quick-hitch is set up? I am able to buy a 66"-70" plow blade assembly for a jeep and wonder if the quick hitch unit houses both the up/down hydraulics as well as the angle hydraulics. Simply put, I want more width than the 54" blade provides. If I...

All the discussion about snowblower vs. snowplow lead me to my dealer. He's now offering me a 72" Frontier quick-attach snowplow assembly to go in place of my bucket. It weighs about 380lbs. The bucket alone weighs just under 200lbs. But, certainly it sticks out further, which must...

I was recently quoted ~$1700.00 for the front blade on a 2305. The configurator prices it at only $1282.00 with blade, front quick hitch, hydraulics and hydraulic angling. Also, I priced out a Frontier attachment online today. I paid $795 for a 6' 'standard' rear blade one year ago. The...

I was quoted ~$1700.00 for the front blade on a 2305. The configurator prices it at $1282.00 with blade, front quick hitch, hydraulics and

I've read nearly every thread in the archives and it's not helpful - maybe too much information?! I have a 2320 and a small driveway. About 40' by 30'. It takes me a while to clear using a loader and rear blade combo. But, I also then tend to 'clean up' after the plow guy has done our...

I'm an owner of 2320 and if I had open field space, there's no doubt I'd buy one. They look like a real tractor. They feel like a real tractor. And they perform like one too. I'm a little disappointed in general with the way tractors are headed, both in terms of the way they look and the way...

When I bought my 2320 in November, I got a small 2.5 gal. red plastic fuel can. Bought diesel at the same fuel station all winter. When pouring, there's a distinct diesel smell and a reddish color. Tractor has run fine all winter. I picked up some diesel at a different station this morning...

There's a pair listed on craigslist. I'm interested. Doable?

Pretty cool concept - certainly more convenient than attaching/detaching even a 4-point backhow. If it's like their other equipment, it'll be a hot seller. In fact, my very favorite piece of motorized equipment is their field mower - perfect in every way...

I'm going through diesel like crazy - and at 3.997 a gallon, it's getting expensive. I have 18 hours - and have filled the tank several times. If I had to guess, I'd say I've gone through 18 gallons in that time. I bought a 6 cyl car two years ago. It only averaged 20 mpg until I racked up...

Certainly, the best thing about this website is the sharing of knowledge - actual knowledge - not just speculation - about things you can't find on Kubota's website or in the brochures. For example, I just read a post about someone considering a B3030 open station, but opting for the hip-level...

I know this is a subject that's tired, overanalyzed and beaten to death, but I've got to ask it... With a 2320, you get a quick-disconnect bucket. It's handy. For forks. But there's no plow assembly available through John Deere. The Curtis is expensive and seems overkill - both in price and...

I see a local dealer has a used 4110 (I think that's the model) with a 46 backhoe. The tractor has about 500 hours - the hoe looks like it's been used, but not abused. What would you offer? Am I dreaming to think $2500 would buy it?

I have yet to buy any PTO attachments, but plan on getting both a mid-mount mower and chipper in the spring. I've had a JD garden tractor with the same style switch as the one on the dash - the yellow pull knob - and on my garden tractor, I would just pull it to engage the mower deck. Never...

As I've posted before, the hydraulics are slow on a 200cx mounted on a 2320. It's really noticeable when plowing snow - the dump function is almost lethargic. I've read posts about 'shimming' hydraulic pressure to achieve more from the loader on a 790. What's that about? Can I do the same to...

my 2320 has 24 engine hp and is rated at 18.5 PTO hp. It has hydro drive. A comparable gear drive tractor always shows a higher PTO hp spec. Does the 18.5 PTO rating apply when driven "under load"? Or standing still? I ask this because I'm thinking of getting a PTO chipper - which is...

I have the Frontier RB1072 and the i-match. The top link is dialed as far in as possible to minimize the blade edge from cutting into the ground. But I still get a washboard effect - the blade is bouncing and cuts into the ground, then bounces, cuts, etc. Wondering if anyone has experience...

I believe the only differences between the 2320 and 2520 (aside from HP) are slightly larger tires, slightly longer wheelbase, metal instead of plastic floorboard, different mid-mount mower lift design & hydraulic pump... But 'real-world' wise, what do you get for the extra 2.5 hp? Quieter at...

I assume this is normal... but my 2320 sounds like it's really being strained when I push down on the hydro pedal, especially in 'high' range. It goes, but makes a lot of noise, even with ear protection. A lot worse when I drop my rear 72" blade to clear snow. Don't get me wrong, it still...

I've been debating buying the dedicated plow assembly (54" quick-hitch style), but will likely be moving snow banks with the FEL. Don't want to spend a ton of time switching between the two... so in my searches, I came across this on the internet...

I have a 2320 with the 200cx loader. I've been debating buying the dedicated plow assembly (54" quick-hitch style), but will likely be moving snow banks with the FEL. Don't want to spend a ton of time switching between the two... so in my searches, I came across this on the internet...

And you thought the question couldn't possibly be asked again! I'll try to frame it differently, though: whoever has plowed with a FEL, a front mount blade AND a rear-mount blade - please speak up! I have a 2320 and spent too much time removing 6" on Monday. I have a budget of $1200. I'll...

My 2320 was delivered last night. I bought the pair of front-mount work lamps and had the dealer install with the new tractor. As many of you have posted (archives search), I don't like the all-or-nothing aspect of having them wired through the headlamp switch. In fact, the switch does not...

I asked this question over at the Kubota thread several months ago. The response was pretty consistent - several times before landing the 'right' machine. Well, I guess I fit that category now as well, as I've just ordered a 2320. I've spend the last few months debating the upgrade, as I...

I'm back at it. Can't shake the thought. Put it behind me for a few months... it snuck up on me again. What is it? The B7610 of course! Before I delve into the payments, though, I have a few lingering questions. First, can I install a subframe (4-point, Kubota of course) to fit a friend's...

I would love to be able to afford a Farmi or Norse... but can't justify the price for (1) what I plan to use it for and (2) for the tractor I own (a BX1500)... So, I've been thinking about how to fabricate an inexpensive, small alternative and wonder if anyone has suggestions. If I were to...

I went to a fair the other day and sat on a B7510. I own a BX1500. The big mistake is I can't stop thinking about that tractor. All that power. All that ground clearance... I don't really regret buying the BX1500, but I've moved to a much larger lot since I bought it last year. Now I could...

In the past, I've done a ton of heavy equipment hauling using 'proper' trailers and tow vehicles... now I'm on my own. My tow vehicle is rated for 3500 lbs. and I've installed a Class II hitch. I'm looking at 5x8 steel tilt-bed utility trailers with single axles and no brakes. My question is...

I bought a BX1500 in December and am now moving to a new lot that is mostly wooded. I don't need the MMM anymore. It's never been used. Is there any value to it? (considering it's a 48" that only fits the last generation BX series - and at that width, really only the BX1500). Or should I...

I have a BX1500 - with 15 engine horsepower and 10.5 PTO horsepower. I like the DR bottom-discharge chipper unit. It has a 19 engine hp minimum - and can accomodate up to 4 1/2 inch branches. My question is: if I limit myself to 3 to 3 1/2 inch branches - and feed it very slowly - can I use...

I meant to post this to the 'buying' thread - not the owning thread - sorry... It seems that many - if not most - of us didn't keep the first tractor for very long. I keep coming across threads and look at people's signatures - so many speak of trading in or selling their tractor for something...

It seems that many - if not most - of us didn't keep the first tractor for very long. I keep coming across threads and look at people's signatures - so many speak of trading in or selling their tractor for something bigger. "Upgrading" seems to be the common experience. I only mention this...

I have a tow-behind York rake that I used to pull around with my John Deere garden tractor - it has a simple pin-style hook up. The problem was, if I wanted to turn around, I'd have to lift the rake, engage the parking brake, get off the tractor... and do it all over again to lower the rake...

I've seen some listed for sale with 300 hours for not a whole lot less than I paid for it... I figure I'll put ~40-50 hours per year. At that rate, figuring I maintain it and don't abuse it, can I get 10 years out of it? 20?

This has been driving me crazy all afternoon - and I have to 'vent...' I installed a Hella dual-beam work lamp on the rear-end of my my BX1500 today - twin 55w lamp style - and I'm quite happy. In fact, it's brighter than the front headlamps. Anyway, my issue is as follows: I was raised by...

This is embarrasing - but I suppose that's what's handy about the anonimity of the internet and sites like this... I'm expecting delivery of a new BX1500 any day now. Typical winter temps in this part of Vermont are 20s by day in Jan to a little below 0 at night. When it gets 'really cold,' I...

I just stumbled across this website: Johnny Products For Bolens, Simplicitys and More They have something called the "Johnny Bucket Sr. w/ angle" front blade. It would seem to be an easy and fairly inexpensive way to add a blade directly to the bucket on my BX1500. I see some people complain...

I signed up for a brand new bx1500 a few weeks ago - the dealer is just waiting for the la181 loader to arrive from Kubota's warehouse. I did get to see the machine a couple of weeks ago - only 4/10 of an hour on the meter and no faded paint - so I assume it was assembled fairly recently. The...